@@ -56,22 +56,19 @@ properties:
- qcom,sm8350-tsens
- const: qcom,tsens-v2
+ - description: v2 of TSENS with combined interrupt
+ items:
+ - enum:
+ - qcom,ipq8074-tsens
+
reg:
items:
- description: TM registers
- description: SROT registers
- interrupts:
- minItems: 1
- items:
- - description: Combined interrupt if upper or lower threshold crossed
- - description: Interrupt if critical threshold crossed
+ interrupts: true
- interrupt-names:
- minItems: 1
- items:
- - const: uplow
- - const: critical
+ interrupt-names: true
nvmem-cells:
minItems: 1
@@ -125,21 +122,66 @@ allOf:
properties:
interrupts:
maxItems: 1
+ items:
+ - description: Combined interrupt if upper or lower threshold crossed
interrupt-names:
maxItems: 1
+ items:
+ - const: uplow
- else:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,msm8953-tsens
+ - qcom,msm8996-tsens
+ - qcom,msm8998-tsens
+ - qcom,sc7180-tsens
+ - qcom,sc7280-tsens
+ - qcom,sc8180x-tsens
+ - qcom,sdm630-tsens
+ - qcom,sdm845-tsens
+ - qcom,sm8150-tsens
+ - qcom,sm8250-tsens
+ - qcom,sm8350-tsens
+ - qcom,tsens-v2
+ then:
properties:
interrupts:
minItems: 2
+ items:
+ - description: Combined interrupt if upper or lower threshold crossed
+ - description: Interrupt if critical threshold crossed
interrupt-names:
minItems: 2
+ items:
+ - const: uplow
+ - const: critical
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-tsens
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ items:
+ - description: Combined interrupt if upper, lower or critical thresholds crossed
+ interrupt-names:
+ maxItems: 1
+ items:
+ - const: combined
- if:
properties:
compatible:
contains:
enum:
+ - qcom,ipq8074-tsens
- qcom,tsens-v0_1
- qcom,tsens-v1
- qcom,tsens-v2
@@ -222,4 +264,19 @@ examples:
#qcom,sensors = <13>;
#thermal-sensor-cells = <1>;
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ // Example 4 (for any IPQ8074 based SoC-s):
+ tsens4: thermal-sensor@4a9000 {
+ compatible = "qcom,ipq8074-tsens";
+ reg = <0x4a9000 0x1000>,
+ <0x4a8000 0x1000>;
+
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "combined";
+
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
...
Qualcomm IPQ8074 has tsens v2.3.0 block, though unlike existing v2 IP it only uses one IRQ, so tsens v2 compatible cannot be used as the fallback. We also have to make sure that correct interrupts are set according to compatibles, so populate interrupt information per compatibles. Signed-off-by: Robert Marko <robimarko@gmail.com> --- .../bindings/thermal/qcom-tsens.yaml | 79 ++++++++++++++++--- 1 file changed, 68 insertions(+), 11 deletions(-)