@@ -624,22 +624,6 @@ static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
return 0;
}
-static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
-{
- int ret = 0;
- struct uart_port *port = &priv->port;
-
- if (port->x_char) {
- dev_dbg(priv->port.dev, "%s:X character send %02x (%lu)\n",
- __func__, port->x_char, jiffies);
- buf[0] = port->x_char;
- port->x_char = 0;
- ret = 1;
- }
-
- return ret;
-}
-
static int dma_push_rx(struct eg20t_port *priv, int size)
{
int room;
@@ -889,9 +873,10 @@ static unsigned int handle_tx(struct eg20t_port *priv)
fifo_size = max(priv->fifo_size, 1);
tx_empty = 1;
- if (pop_tx_x(priv, xmit->buf)) {
- pch_uart_hal_write(priv, xmit->buf, 1);
+ if (port->x_char) {
+ pch_uart_hal_write(priv, &port->x_char, 1);
port->icount.tx++;
+ port->x_char = 0;
tx_empty = 0;
fifo_size--;
}
@@ -948,9 +933,11 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
}
fifo_size = max(priv->fifo_size, 1);
- if (pop_tx_x(priv, xmit->buf)) {
- pch_uart_hal_write(priv, xmit->buf, 1);
+
+ if (port->x_char) {
+ pch_uart_hal_write(priv, &port->x_char, 1);
port->icount.tx++;
+ port->x_char = 0;
fifo_size--;
}
When x_char is to be sent, the TX path overwrites whatever is in the circular buffer at offset 0 with x_char and sends it using pch_uart_hal_write(). I don't understand how this was supposed to work if xmit->buf[0] already contained some character. It must have been lost. Remove this whole pop_tx_x() concept and do the work directly in the callers. (Without printing anything using dev_dbg().) Cc: <stable@vger.kernel.org> Fixes: 3c6a483275f4 (Serial: EG20T: add PCH_UART driver) Signed-off-by: Jiri Slaby <jslaby@suse.cz> --- drivers/tty/serial/pch_uart.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-)