| Message ID | alpine.DEB.2.21.2204291656280.9383@angie.orcam.me.uk |
|---|---|
| State | New |
| Headers | show |
| Series | serial: sifive: Correct/improve baud base handling | expand |
Index: linux-macro/drivers/tty/serial/sifive.c =================================================================== --- linux-macro.orig/drivers/tty/serial/sifive.c +++ linux-macro/drivers/tty/serial/sifive.c @@ -998,7 +998,7 @@ static int sifive_serial_probe(struct pl /* Set up clock divider */ ssp->clkin_rate = clk_get_rate(ssp->clk); ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE; - ssp->port.uartclk = ssp->baud_rate * 16; + ssp->port.uartclk = ssp->clkin_rate; __ssp_update_div(ssp); platform_set_drvdata(pdev, ssp);
The base baud value reported is supposed to be the highest baud rate that can be set for a serial port. The SiFive FU740-C000 SOC's on-chip UART supports baud rates of up to 1/16 of the input clock rate, which is the bus clock `tlclk'[1], often at 130MHz in the case of the HiFive Unmatched board. However the sifive UART driver reports a fixed value of 115200 instead: 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 115200) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 115200) is a SiFive UART v0 even though we already support setting higher baud rates, e.g.: $ tty /dev/ttySIF1 $ stty speed 230400 The baud base value is computed by the serial core by dividing the UART clock recorded in `struct uart_port' by 16, which is also the minimum value of the clock divider supported, so correct the baud base value reported by setting the UART clock recorded to the input clock rate rather than 115200: 10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 8125000) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 8125000) is a SiFive UART v0 References: [1] "SiFive FU740-C000 Manual", v1p3, SiFive, Inc., August 13, 2021, Section 16.9 "Baud Rate Divisor Register (div)", pp.143-144 Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1f1496a923b6 ("riscv: Fix sifive serial driver") --- drivers/tty/serial/sifive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) linux-serial-sifive-base-baud.diff