diff mbox

[v2,2/4] vexpress64: use 2nd DRAM bank only on juno

Message ID 1447843149-28412-3-git-send-email-ryan.harkin@linaro.org
State Accepted
Commit 2c2b218383f05be51e1bd5f5982a44b969c4b5a6
Headers show

Commit Message

Ryan Harkin Nov. 18, 2015, 10:39 a.m. UTC
This patch makes the 2nd DRAM bank available on Juno only and not on
other vexpress64 targets, eg. the FVP models.

The commit below added a 2nd bank of NOR flash for Juno, but also for
all vexpress64 targets:

    commit 2d0cee1ca2b9d977fa3214896bb2e30cfec77059
    Author: Liviu Dudau <Liviu.Dudau@foss.arm.com>
    Date:   Mon Oct 19 11:08:31 2015 +0100

    vexpress64: Juno: Declare all 8GB of RAM and make them visible to the kernel.

    Juno comes with 8GB RAM, but U-Boot only passes 2GB to the kernel.
    Declare a secondary memory bank and set the sizes correctly.

    Signed-off-by: Liviu Dudau <Liviu.Dudau@foss.arm.com>

    Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

    Reviewed-by: Ryan Harkin <ryan.harkin@linaro.org>

    Tested-by: Ryan Harkin <ryan.harkin@linaro.org>


Unfortunately, I only fully tested on Juno R0, R1 and the FVP Foundation
model.  Whilst FVP Base AEMV8 models run U-Boot OK, they fail to boot
the kernel.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>

Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

---
 board/armltd/vexpress64/vexpress64.c |  2 ++
 include/configs/vexpress_aemv8a.h    | 11 ++++++++---
 2 files changed, 10 insertions(+), 3 deletions(-)

-- 
2.1.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
diff mbox

Patch

diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c
index 3add099..6efc8c1 100644
--- a/board/armltd/vexpress64/vexpress64.c
+++ b/board/armltd/vexpress64/vexpress64.c
@@ -51,8 +51,10 @@  void dram_init_banksize(void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+#ifdef PHYS_SDRAM_2
 	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+#endif
 }
 
 /*
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index a99d712..3c9faf4 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -165,15 +165,20 @@ 
 #define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x10000000)
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		2
 #define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_2			(0x880000000)
 /* Top 16MB reserved for secure world use */
 #define DRAM_SEC_SIZE		0x01000000
 #define PHYS_SDRAM_1_SIZE	0x80000000 - DRAM_SEC_SIZE
-#define PHYS_SDRAM_2_SIZE	0x180000000
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_2			(0x880000000)
+#define PHYS_SDRAM_2_SIZE		0x180000000
+#else
+#define CONFIG_NR_DRAM_BANKS		1
+#endif
+
 /* Enable memtest */
 #define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1