@@ -526,7 +526,11 @@ static const struct reg_value ov7251_setting_vga_90fps[] = {
};
static const s64 link_freq[] = {
- 240000000,
+ [OV7251_LINK_FREQ_240_MHZ] = 240000000,
+};
+
+static const s64 pixel_rates[] = {
+ [OV7251_LINK_FREQ_240_MHZ] = 48000000,
};
static const struct ov7251_mode_info ov7251_mode_info_data[] = {
@@ -535,8 +539,6 @@ static const struct ov7251_mode_info ov7251_mode_info_data[] = {
.height = 480,
.data = ov7251_setting_vga_30fps,
.data_size = ARRAY_SIZE(ov7251_setting_vga_30fps),
- .pixel_clock = 48000000,
- .link_freq = 0, /* an index in link_freq[] */
.exposure_max = 1704,
.exposure_def = 504,
.timeperframe = {
@@ -549,8 +551,6 @@ static const struct ov7251_mode_info ov7251_mode_info_data[] = {
.height = 480,
.data = ov7251_setting_vga_60fps,
.data_size = ARRAY_SIZE(ov7251_setting_vga_60fps),
- .pixel_clock = 48000000,
- .link_freq = 0, /* an index in link_freq[] */
.exposure_max = 840,
.exposure_def = 504,
.timeperframe = {
@@ -563,8 +563,6 @@ static const struct ov7251_mode_info ov7251_mode_info_data[] = {
.height = 480,
.data = ov7251_setting_vga_90fps,
.data_size = ARRAY_SIZE(ov7251_setting_vga_90fps),
- .pixel_clock = 48000000,
- .link_freq = 0, /* an index in link_freq[] */
.exposure_max = 552,
.exposure_def = 504,
.timeperframe = {
@@ -1059,16 +1057,6 @@ static int ov7251_set_format(struct v4l2_subdev *sd,
__crop->height = new_mode->height;
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
- ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock,
- new_mode->pixel_clock);
- if (ret < 0)
- goto exit;
-
- ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq,
- new_mode->link_freq);
- if (ret < 0)
- goto exit;
-
ret = __v4l2_ctrl_modify_range(ov7251->exposure,
1, new_mode->exposure_max,
1, new_mode->exposure_def);
@@ -1199,16 +1187,6 @@ static int ov7251_set_frame_interval(struct v4l2_subdev *subdev,
new_mode = ov7251_find_mode_by_ival(ov7251, &fi->interval);
if (new_mode != ov7251->current_mode) {
- ret = __v4l2_ctrl_s_ctrl_int64(ov7251->pixel_clock,
- new_mode->pixel_clock);
- if (ret < 0)
- goto exit;
-
- ret = __v4l2_ctrl_s_ctrl(ov7251->link_freq,
- new_mode->link_freq);
- if (ret < 0)
- goto exit;
-
ret = __v4l2_ctrl_modify_range(ov7251->exposure,
1, new_mode->exposure_max,
1, new_mode->exposure_def);
@@ -1317,6 +1295,7 @@ static int ov7251_probe(struct i2c_client *client)
struct device *dev = &client->dev;
struct ov7251 *ov7251;
u8 chip_id_high, chip_id_low, chip_rev;
+ s64 pixel_rate;
int ret;
ov7251 = devm_kzalloc(dev, sizeof(struct ov7251), GFP_KERNEL);
@@ -1398,17 +1377,23 @@ static int ov7251_probe(struct i2c_client *client)
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(ov7251_test_pattern_menu) - 1,
0, 0, ov7251_test_pattern_menu);
+
+ pixel_rate = pixel_rates[ov7251->link_freq_idx];
ov7251->pixel_clock = v4l2_ctrl_new_std(&ov7251->ctrls,
&ov7251_ctrl_ops,
V4L2_CID_PIXEL_RATE,
- 1, INT_MAX, 1, 1);
+ pixel_rate, INT_MAX,
+ pixel_rate, pixel_rate);
ov7251->link_freq = v4l2_ctrl_new_int_menu(&ov7251->ctrls,
&ov7251_ctrl_ops,
V4L2_CID_LINK_FREQ,
ARRAY_SIZE(link_freq) - 1,
- 0, link_freq);
+ ov7251->link_freq_idx,
+ link_freq);
if (ov7251->link_freq)
ov7251->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+ if (ov7251->pixel_clock)
+ ov7251->pixel_clock->flags |= V4L2_CTRL_FLAG_READ_ONLY;
ov7251->sd.ctrl_handler = &ov7251->ctrls;
Each of the defined modes in the ov7251 driver uses the same link frequency and pixel rate; just drop those members of the modes and set the controls to read only during initialisation. Add a new table defining the supported pixel rates to substitue for the values hardcoded in the modes. Signed-off-by: Daniel Scally <djrscally@gmail.com> --- Changes in v3: - None Changes in v2: - New patch drivers/media/i2c/ov7251.c | 43 +++++++++++++------------------------- 1 file changed, 14 insertions(+), 29 deletions(-)