diff mbox series

[5.17,057/225] cpufreq: qcom-hw: fix the opp entries refcounting

Message ID 20220504153115.251833804@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman May 4, 2022, 4:44 p.m. UTC
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 6240aaad75e1a623872a830d13393d7aabf1052c ]

The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for
throttling, but will not put it, ending up with leaking a reference
count and the following backtrace when putting the CPU offline.

Correctly put the reference count of the returned opp instance.

[   84.418025] ------------[ cut here ]------------
[   84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190
[   84.431966] Modules linked in:
[   84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S                5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721
[   84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--)
[   84.458781] pc : _opp_table_kref_release+0x188/0x190
[   84.463878] lr : _opp_table_kref_release+0x78/0x190
[   84.468885] sp : ffff80000841bc70
[   84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908
[   84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0
[   84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80
[   84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff
[   84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448
[   84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000
[   84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000
[   84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001
[   84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00
[   84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0
[   84.545579] Call trace:
[   84.548101]  _opp_table_kref_release+0x188/0x190
[   84.552842]  dev_pm_opp_remove_all_dynamic+0x8c/0xc0
[   84.557949]  qcom_cpufreq_hw_cpu_exit+0x30/0xdc
[   84.562608]  cpufreq_offline.isra.0+0x1b4/0x1d8
[   84.567270]  cpuhp_cpufreq_offline+0x10/0x6c
[   84.571663]  cpuhp_invoke_callback+0x16c/0x2b0
[   84.576231]  cpuhp_thread_fun+0x190/0x250
[   84.580353]  smpboot_thread_fn+0x12c/0x230
[   84.584568]  kthread+0xfc/0x100
[   84.587810]  ret_from_fork+0x10/0x20
[   84.591490] irq event stamp: 3482
[   84.594901] hardirqs last  enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c
[   84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c
[   84.611074] softirqs last  enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588
[   84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174
[   84.627691] ---[ end trace 0000000000000000 ]---

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index dc0d5f84d863..60d38f62308a 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -292,12 +292,18 @@  static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
 
 	opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
 	if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
-		dev_pm_opp_find_freq_ceil(dev, &freq_hz);
+		opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);
 
-	throttled_freq = freq_hz / HZ_PER_KHZ;
+	if (IS_ERR(opp)) {
+		dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp);
+	} else {
+		throttled_freq = freq_hz / HZ_PER_KHZ;
+
+		/* Update thermal pressure (the boost frequencies are accepted) */
+		arch_update_thermal_pressure(policy->related_cpus, throttled_freq);
 
-	/* Update thermal pressure (the boost frequencies are accepted) */
-	arch_update_thermal_pressure(policy->related_cpus, throttled_freq);
+		dev_pm_opp_put(opp);
+	}
 
 	/*
 	 * In the unlikely case policy is unregistered do not enable