@@ -2040,49 +2040,35 @@ static void gsm_error(struct gsm_mux *gs
gsm->io_error++;
}
-static int gsm_disconnect(struct gsm_mux *gsm)
-{
- struct gsm_dlci *dlci = gsm->dlci[0];
- struct gsm_control *gc;
-
- if (!dlci)
- return 0;
-
- /* In theory disconnecting DLCI 0 is sufficient but for some
- modems this is apparently not the case. */
- gc = gsm_control_send(gsm, CMD_CLD, NULL, 0);
- if (gc)
- gsm_control_wait(gsm, gc);
-
- del_timer_sync(&gsm->t2_timer);
- /* Now we are sure T2 has stopped */
-
- gsm_dlci_begin_close(dlci);
- wait_event_interruptible(gsm->event,
- dlci->state == DLCI_CLOSED);
-
- if (signal_pending(current))
- return -EINTR;
-
- return 0;
-}
-
/**
* gsm_cleanup_mux - generic GSM protocol cleanup
* @gsm: our mux
+ * @disc: disconnect link?
*
* Clean up the bits of the mux which are the same for all framing
* protocols. Remove the mux from the mux table, stop all the timers
* and then shut down each device hanging up the channels as we go.
*/
-static void gsm_cleanup_mux(struct gsm_mux *gsm)
+static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
{
int i;
struct gsm_dlci *dlci = gsm->dlci[0];
struct gsm_msg *txq, *ntxq;
gsm->dead = true;
+ mutex_lock(&gsm->mutex);
+
+ if (dlci) {
+ if (disc && dlci->state != DLCI_CLOSED) {
+ gsm_dlci_begin_close(dlci);
+ wait_event(gsm->event, dlci->state == DLCI_CLOSED);
+ }
+ dlci->dead = true;
+ }
+
+ /* Finish outstanding timers, making sure they are done */
+ del_timer_sync(&gsm->t2_timer);
spin_lock(&gsm_mux_lock);
for (i = 0; i < MAX_MUX; i++) {
@@ -2096,13 +2082,7 @@ static void gsm_cleanup_mux(struct gsm_m
if (i == MAX_MUX)
return;
- del_timer_sync(&gsm->t2_timer);
- /* Now we are sure T2 has stopped */
- if (dlci)
- dlci->dead = true;
-
/* Free up any link layer users */
- mutex_lock(&gsm->mutex);
for (i = 0; i < NUM_DLCI; i++)
if (gsm->dlci[i])
gsm_dlci_release(gsm->dlci[i]);
@@ -2304,19 +2284,11 @@ static int gsm_config(struct gsm_mux *gs
/*
* Close down what is needed, restart and initiate the new
- * configuration
+ * configuration. On the first time there is no DLCI[0]
+ * and closing or cleaning up is not necessary.
*/
-
- if (need_close || need_restart) {
- int ret;
-
- ret = gsm_disconnect(gsm);
-
- if (ret)
- return ret;
- }
- if (need_restart)
- gsm_cleanup_mux(gsm);
+ if (need_close || need_restart)
+ gsm_cleanup_mux(gsm, true);
gsm->initiator = c->initiator;
gsm->mru = c->mru;
@@ -2425,7 +2397,7 @@ static void gsmld_detach_gsm(struct tty_
WARN_ON(tty != gsm->tty);
for (i = 1; i < NUM_DLCI; i++)
tty_unregister_device(gsm_tty_driver, base + i);
- gsm_cleanup_mux(gsm);
+ gsm_cleanup_mux(gsm, false);
tty_kref_put(gsm->tty);
gsm->tty = NULL;
}
@@ -2531,7 +2503,7 @@ static int gsmld_open(struct tty_struct
ret = gsmld_attach_gsm(tty, gsm);
if (ret != 0) {
- gsm_cleanup_mux(gsm);
+ gsm_cleanup_mux(gsm, false);
mux_put(gsm);
}
return ret;