@@ -194,6 +194,7 @@ struct qcom_pcie_ops {
struct qcom_pcie_cfg {
const struct qcom_pcie_ops *ops;
+ unsigned int num_vectors;
unsigned int pipe_clk_need_muxing:1;
unsigned int has_tbu_clk:1;
unsigned int has_ddrss_sf_tbu_clk:1;
@@ -1502,6 +1503,7 @@ static const struct qcom_pcie_cfg ipq8064_cfg = {
static const struct qcom_pcie_cfg msm8996_cfg = {
.ops = &ops_2_3_2,
+ .num_vectors = MAX_MSI_IRQS,
};
static const struct qcom_pcie_cfg ipq8074_cfg = {
@@ -1514,6 +1516,7 @@ static const struct qcom_pcie_cfg ipq4019_cfg = {
static const struct qcom_pcie_cfg sdm845_cfg = {
.ops = &ops_2_7_0,
+ .num_vectors = MAX_MSI_IRQS,
.has_tbu_clk = true,
};
@@ -1522,16 +1525,19 @@ static const struct qcom_pcie_cfg sm8150_cfg = {
* 1.9.0, so reuse the same.
*/
.ops = &ops_1_9_0,
+ .num_vectors = MAX_MSI_IRQS,
};
static const struct qcom_pcie_cfg sm8250_cfg = {
.ops = &ops_1_9_0,
+ .num_vectors = MAX_MSI_IRQS,
.has_tbu_clk = true,
.has_ddrss_sf_tbu_clk = true,
};
static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
.ops = &ops_1_9_0,
+ .num_vectors = MAX_MSI_IRQS,
.has_ddrss_sf_tbu_clk = true,
.pipe_clk_need_muxing = true,
.has_aggre0_clk = true,
@@ -1540,6 +1546,7 @@ static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
.ops = &ops_1_9_0,
+ .num_vectors = MAX_MSI_IRQS,
.has_ddrss_sf_tbu_clk = true,
.pipe_clk_need_muxing = true,
.has_aggre1_clk = true,
@@ -1547,6 +1554,7 @@ static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
static const struct qcom_pcie_cfg sc7280_cfg = {
.ops = &ops_1_9_0,
+ .num_vectors = MAX_MSI_IRQS,
.has_tbu_clk = true,
.pipe_clk_need_muxing = true,
};
@@ -1592,6 +1600,11 @@ static int qcom_pcie_probe(struct platform_device *pdev)
pcie->cfg = pcie_cfg;
+ if (pcie->cfg->num_vectors) {
+ pp->num_vectors = pcie->cfg->num_vectors;
+ pp->has_split_msi_irq = true;
+ }
+
pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
if (IS_ERR(pcie->reset)) {
ret = PTR_ERR(pcie->reset);
On some of Qualcomm platforms each group of 32 MSI vectors is routed to the separate GIC interrupt. Thus, to receive higher MSI vectors properly, declare that the host should use split MSI IRQ handling on these platforms. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/pci/controller/dwc/pcie-qcom.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)