diff mbox series

[v2,3/3] arm64: dts: qcom: sm8250: Move qup-opp-table out of soc node

Message ID 20220518092001.2262024-4-vkoul@kernel.org
State Superseded
Headers show
Series arm64: dts: qcom: Get rid of some warnings | expand

Commit Message

Vinod Koul May 18, 2022, 9:20 a.m. UTC 
The soc node expects all the nodes to have unit addresses. The
qup-opp-table does not have that which causes warnings:

arch/arm64/boot/dts/qcom/sm8250.dtsi:916.32-933.5:
	Warning (simple_bus_reg): /soc@0/qup-opp-table:
	missing or empty reg/ranges property

Move the qup-opp-table out of soc node to fix these warnings

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 38 ++++++++++++++--------------
 1 file changed, 19 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index dc2562070336..1c2d85abf72e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -702,6 +702,25 @@  CLUSTER_PD: cpu-cluster0 {
 		};
 	};
 
+	qup_opp_table: qup-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -914,25 +933,6 @@  rng: rng@793000 {
 			clock-names = "core";
 		};
 
-		qup_opp_table: qup-opp-table {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				required-opps = <&rpmhpd_opp_min_svs>;
-			};
-
-			opp-75000000 {
-				opp-hz = /bits/ 64 <75000000>;
-				required-opps = <&rpmhpd_opp_low_svs>;
-			};
-
-			opp-120000000 {
-				opp-hz = /bits/ 64 <120000000>;
-				required-opps = <&rpmhpd_opp_svs>;
-			};
-		};
-
 		gpi_dma2: dma-controller@800000 {
 			compatible = "qcom,sm8250-gpi-dma";
 			reg = <0 0x00800000 0 0x70000>;