Message ID | 1654200007-5453-1-git-send-email-quic_ylal@quicinc.com |
---|---|
State | New |
Headers | show |
Series | remoteproc: qcom: pas: Adjust the phys addr wrt the mem region | expand |
Hey Yogesh, Thanks for the patch. On 6/3/22 1:30 AM, Yogesh Lal wrote: > The minidump table in the toc contains physical addresses that may lie > before the physical address of the first elf segment in relocatable doesn't this apply to full coredumps as well? Do you plan to address that in a separate patch? > images. This change adds a custom dump function for minidumps which > calculates the offset into the carveout region using the start of > the physical address instead of the start of the first elf segment. > > Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com> > --- > drivers/remoteproc/qcom_common.c | 9 +++++---- > drivers/remoteproc/qcom_common.h | 5 ++++- > drivers/remoteproc/qcom_q6v5_pas.c | 21 ++++++++++++++++++++- > 3 files changed, 29 insertions(+), 6 deletions(-) > > diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c > index 246e716..503326b 100644 > --- a/drivers/remoteproc/qcom_common.c > +++ b/drivers/remoteproc/qcom_common.c > @@ -101,7 +101,8 @@ static void qcom_minidump_cleanup(struct rproc *rproc) > } > } > > -static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem) > +static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem, > + rproc_dumpfn_t dumpfn) > { > struct minidump_region __iomem *ptr; > struct minidump_region region; > @@ -131,7 +132,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy > } > da = le64_to_cpu(region.address); > size = le32_to_cpu(region.size); > - rproc_coredump_add_custom_segment(rproc, da, size, NULL, name); > + rproc_coredump_add_custom_segment(rproc, da, size, dumpfn, name); > } > } > > @@ -139,7 +140,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy > return 0; > } > > -void qcom_minidump(struct rproc *rproc, unsigned int minidump_id) > +void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, rproc_dumpfn_t dumpfn) > { > int ret; > struct minidump_subsystem *subsystem; > @@ -179,7 +180,7 @@ void qcom_minidump(struct rproc *rproc, unsigned int minidump_id) > > rproc_coredump_cleanup(rproc); > > - ret = qcom_add_minidump_segments(rproc, subsystem); > + ret = qcom_add_minidump_segments(rproc, subsystem, dumpfn); > if (ret) { > dev_err(&rproc->dev, "Failed with error: %d while adding minidump entries\n", ret); > goto clean_minidump; > diff --git a/drivers/remoteproc/qcom_common.h b/drivers/remoteproc/qcom_common.h > index c35adf7..29e528b 100644 > --- a/drivers/remoteproc/qcom_common.h > +++ b/drivers/remoteproc/qcom_common.h > @@ -33,7 +33,10 @@ struct qcom_rproc_ssr { > struct qcom_ssr_subsystem *info; > }; > > -void qcom_minidump(struct rproc *rproc, unsigned int minidump_id); > +typedef void (*rproc_dumpfn_t)(struct rproc *rproc, struct rproc_dump_segment *segment, > + void *dest, size_t offset, size_t size); you can perhaps stick with not using typedef like how it is handled in remoteproc_coredump. > + > +void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, rproc_dumpfn_t dumpfn); > > void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink, > const char *ssr_name); > diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c > index 6e5cbca..9c6cb0b 100644 > --- a/drivers/remoteproc/qcom_q6v5_pas.c > +++ b/drivers/remoteproc/qcom_q6v5_pas.c > @@ -83,11 +83,30 @@ struct qcom_adsp { > struct qcom_sysmon *sysmon; > }; > > +void adsp_segment_dump(struct rproc *rproc, struct rproc_dump_segment *segment, > + void *dest, size_t offset, size_t size) > +{ > + struct qcom_adsp *adsp = rproc->priv; > + int total_offset; > + > + total_offset = segment->da + segment->offset + offset - adsp->mem_phys; > + if (total_offset < 0 || total_offset + size > adsp->mem_size) { > + dev_err(adsp->dev, > + "invalid copy request for segment %pad with offset %zu and size %zu)\n", > + &segment->da, offset, size); > + memset(dest, 0xff, size); > + return; > + } > + > + memcpy_fromio(dest, adsp->mem_region + total_offset, size); > +} > + > + remove additional empty line. > static void adsp_minidump(struct rproc *rproc) > { > struct qcom_adsp *adsp = rproc->priv; > > - qcom_minidump(rproc, adsp->minidump_id); > + qcom_minidump(rproc, adsp->minidump_id, adsp_segment_dump); > } > > static int adsp_pds_enable(struct qcom_adsp *adsp, struct device **pds, >
diff --git a/drivers/remoteproc/qcom_common.c b/drivers/remoteproc/qcom_common.c index 246e716..503326b 100644 --- a/drivers/remoteproc/qcom_common.c +++ b/drivers/remoteproc/qcom_common.c @@ -101,7 +101,8 @@ static void qcom_minidump_cleanup(struct rproc *rproc) } } -static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem) +static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsystem *subsystem, + rproc_dumpfn_t dumpfn) { struct minidump_region __iomem *ptr; struct minidump_region region; @@ -131,7 +132,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy } da = le64_to_cpu(region.address); size = le32_to_cpu(region.size); - rproc_coredump_add_custom_segment(rproc, da, size, NULL, name); + rproc_coredump_add_custom_segment(rproc, da, size, dumpfn, name); } } @@ -139,7 +140,7 @@ static int qcom_add_minidump_segments(struct rproc *rproc, struct minidump_subsy return 0; } -void qcom_minidump(struct rproc *rproc, unsigned int minidump_id) +void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, rproc_dumpfn_t dumpfn) { int ret; struct minidump_subsystem *subsystem; @@ -179,7 +180,7 @@ void qcom_minidump(struct rproc *rproc, unsigned int minidump_id) rproc_coredump_cleanup(rproc); - ret = qcom_add_minidump_segments(rproc, subsystem); + ret = qcom_add_minidump_segments(rproc, subsystem, dumpfn); if (ret) { dev_err(&rproc->dev, "Failed with error: %d while adding minidump entries\n", ret); goto clean_minidump; diff --git a/drivers/remoteproc/qcom_common.h b/drivers/remoteproc/qcom_common.h index c35adf7..29e528b 100644 --- a/drivers/remoteproc/qcom_common.h +++ b/drivers/remoteproc/qcom_common.h @@ -33,7 +33,10 @@ struct qcom_rproc_ssr { struct qcom_ssr_subsystem *info; }; -void qcom_minidump(struct rproc *rproc, unsigned int minidump_id); +typedef void (*rproc_dumpfn_t)(struct rproc *rproc, struct rproc_dump_segment *segment, + void *dest, size_t offset, size_t size); + +void qcom_minidump(struct rproc *rproc, unsigned int minidump_id, rproc_dumpfn_t dumpfn); void qcom_add_glink_subdev(struct rproc *rproc, struct qcom_rproc_glink *glink, const char *ssr_name); diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c index 6e5cbca..9c6cb0b 100644 --- a/drivers/remoteproc/qcom_q6v5_pas.c +++ b/drivers/remoteproc/qcom_q6v5_pas.c @@ -83,11 +83,30 @@ struct qcom_adsp { struct qcom_sysmon *sysmon; }; +void adsp_segment_dump(struct rproc *rproc, struct rproc_dump_segment *segment, + void *dest, size_t offset, size_t size) +{ + struct qcom_adsp *adsp = rproc->priv; + int total_offset; + + total_offset = segment->da + segment->offset + offset - adsp->mem_phys; + if (total_offset < 0 || total_offset + size > adsp->mem_size) { + dev_err(adsp->dev, + "invalid copy request for segment %pad with offset %zu and size %zu)\n", + &segment->da, offset, size); + memset(dest, 0xff, size); + return; + } + + memcpy_fromio(dest, adsp->mem_region + total_offset, size); +} + + static void adsp_minidump(struct rproc *rproc) { struct qcom_adsp *adsp = rproc->priv; - qcom_minidump(rproc, adsp->minidump_id); + qcom_minidump(rproc, adsp->minidump_id, adsp_segment_dump); } static int adsp_pds_enable(struct qcom_adsp *adsp, struct device **pds,
The minidump table in the toc contains physical addresses that may lie before the physical address of the first elf segment in relocatable images. This change adds a custom dump function for minidumps which calculates the offset into the carveout region using the start of the physical address instead of the start of the first elf segment. Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com> --- drivers/remoteproc/qcom_common.c | 9 +++++---- drivers/remoteproc/qcom_common.h | 5 ++++- drivers/remoteproc/qcom_q6v5_pas.c | 21 ++++++++++++++++++++- 3 files changed, 29 insertions(+), 6 deletions(-)