| Message ID | 20220611195713.131597-1-andrey.konovalov@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1 | expand |
On 6/11/22 22:57, Andrey Konovalov wrote: > The current settings refer to "blsp_spi1" function which isn't defined. > For this reason an attempt to enable blsp1_spi1 interface results in > the probe failure below: > > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 > > Fix this by making the functions used in qcs404.dtsi to match the contents > of drivers/pinctrl/qcom/pinctrl-qcs404.c. ... and Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt. > > Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> > --- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index d912166b7552..0d9e1f19aa67 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default { > }; > > blsp1_spi1_default: blsp1-spi1-default { > - pins = "gpio22", "gpio23", "gpio24", "gpio25"; > - function = "blsp_spi1"; > + mosi { > + pins = "gpio22"; > + function = "blsp_spi_mosi_a1"; > + }; > + > + miso { > + pins = "gpio23"; > + function = "blsp_spi_miso_a1"; > + }; > + > + cs_n { > + pins = "gpio24"; > + function = "blsp_spi_cs_n_a1"; > + }; > + > + clk { > + pins = "gpio25"; > + function = "blsp_spi_clk_a1"; > + }; > }; > > blsp1_spi2_default: blsp1-spi2-default {
On 11-06-22, 22:57, Andrey Konovalov wrote: > The current settings refer to "blsp_spi1" function which isn't defined. > For this reason an attempt to enable blsp1_spi1 interface results in > the probe failure below: > > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 > > Fix this by making the functions used in qcs404.dtsi to match the contents > of drivers/pinctrl/qcom/pinctrl-qcs404.c. Right, I cannot find blsp_spi1 which is the only one which is missing, not sure why... Bjorn do you recall why SPI1 is treated differently... > > Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> > --- > arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++-- > 1 file changed, 19 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > index d912166b7552..0d9e1f19aa67 100644 > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default { > }; > > blsp1_spi1_default: blsp1-spi1-default { > - pins = "gpio22", "gpio23", "gpio24", "gpio25"; > - function = "blsp_spi1"; > + mosi { > + pins = "gpio22"; > + function = "blsp_spi_mosi_a1"; > + }; > + > + miso { > + pins = "gpio23"; > + function = "blsp_spi_miso_a1"; > + }; > + > + cs_n { > + pins = "gpio24"; > + function = "blsp_spi_cs_n_a1"; > + }; > + > + clk { > + pins = "gpio25"; > + function = "blsp_spi_clk_a1"; > + }; > }; > > blsp1_spi2_default: blsp1-spi2-default { > -- > 2.25.1
On Wed 22 Jun 00:18 CDT 2022, Vinod Koul wrote: > On 11-06-22, 22:57, Andrey Konovalov wrote: > > The current settings refer to "blsp_spi1" function which isn't defined. > > For this reason an attempt to enable blsp1_spi1 interface results in > > the probe failure below: > > > > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 > > > > Fix this by making the functions used in qcs404.dtsi to match the contents > > of drivers/pinctrl/qcom/pinctrl-qcs404.c. > > Right, I cannot find blsp_spi1 which is the only one which is missing, > not sure why... > > Bjorn do you recall why SPI1 is treated differently... > Looking at the available pinctrl functions, I believe that blsp_spi1 has two possible mux options; identified b y blsp_spi_*_a1 and blsp_spi_*_b1. Regards, Bjorn > > > > Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++-- > > 1 file changed, 19 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi > > index d912166b7552..0d9e1f19aa67 100644 > > --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi > > +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi > > @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default { > > }; > > > > blsp1_spi1_default: blsp1-spi1-default { > > - pins = "gpio22", "gpio23", "gpio24", "gpio25"; > > - function = "blsp_spi1"; > > + mosi { > > + pins = "gpio22"; > > + function = "blsp_spi_mosi_a1"; > > + }; > > + > > + miso { > > + pins = "gpio23"; > > + function = "blsp_spi_miso_a1"; > > + }; > > + > > + cs_n { > > + pins = "gpio24"; > > + function = "blsp_spi_cs_n_a1"; > > + }; > > + > > + clk { > > + pins = "gpio25"; > > + function = "blsp_spi_clk_a1"; > > + }; > > }; > > > > blsp1_spi2_default: blsp1-spi2-default { > > -- > > 2.25.1 > > -- > ~Vinod
On 30-06-22, 09:18, Bjorn Andersson wrote: > On Wed 22 Jun 00:18 CDT 2022, Vinod Koul wrote: > > > On 11-06-22, 22:57, Andrey Konovalov wrote: > > > The current settings refer to "blsp_spi1" function which isn't defined. > > > For this reason an attempt to enable blsp1_spi1 interface results in > > > the probe failure below: > > > > > > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > > > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 > > > > > > Fix this by making the functions used in qcs404.dtsi to match the contents > > > of drivers/pinctrl/qcom/pinctrl-qcs404.c. > > > > Right, I cannot find blsp_spi1 which is the only one which is missing, > > not sure why... > > > > Bjorn do you recall why SPI1 is treated differently... > > Looking at the available pinctrl functions, I believe that blsp_spi1 has > two possible mux options; identified b y blsp_spi_*_a1 and > blsp_spi_*_b1. Yes, so are we good to merge this?
On Sat, 11 Jun 2022 22:57:13 +0300, Andrey Konovalov wrote: > The current settings refer to "blsp_spi1" function which isn't defined. > For this reason an attempt to enable blsp1_spi1 interface results in > the probe failure below: > > [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table > [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 > > [...] Applied, thanks! [1/1] arm64: dts: qcom: qcs404: fix default pinctrl settings for blsp1_spi1 commit: 2cac6baf0249cdd3748128f3196c2d203b06a4af Best regards,
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index d912166b7552..0d9e1f19aa67 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -669,8 +669,25 @@ blsp1_spi0_default: blsp1-spi0-default { }; blsp1_spi1_default: blsp1-spi1-default { - pins = "gpio22", "gpio23", "gpio24", "gpio25"; - function = "blsp_spi1"; + mosi { + pins = "gpio22"; + function = "blsp_spi_mosi_a1"; + }; + + miso { + pins = "gpio23"; + function = "blsp_spi_miso_a1"; + }; + + cs_n { + pins = "gpio24"; + function = "blsp_spi_cs_n_a1"; + }; + + clk { + pins = "gpio25"; + function = "blsp_spi_clk_a1"; + }; }; blsp1_spi2_default: blsp1-spi2-default {
The current settings refer to "blsp_spi1" function which isn't defined. For this reason an attempt to enable blsp1_spi1 interface results in the probe failure below: [ 3.492900] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.502460] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.517725] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.532998] qcs404-pinctrl 1000000.pinctrl: invalid function blsp_spi1 in map table [ 3.548277] spi_qup: probe of 78b6000.spi failed with error -22 Fix this by making the functions used in qcs404.dtsi to match the contents of drivers/pinctrl/qcom/pinctrl-qcs404.c. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> --- arch/arm64/boot/dts/qcom/qcs404.dtsi | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)