diff mbox series

[V3,10/10] arm64: dts: imx8mp: add NoC node

Message ID 20220703091132.1412063-11-peng.fan@oss.nxp.com
State New
Headers show
Series [V3,01/10] dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc | expand

Commit Message

Peng Fan (OSS) July 3, 2022, 9:11 a.m. UTC 
From: Peng Fan <peng.fan@nxp.com>

Add i.MX8MP NoC node to make the interconnect i.MX8MP driver could work.
Currently dynamic frequency scaling of the i.MX8MP NoC has not been
supported, only NoC initial settings are configured by interconnect
driver.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index eb2d516278eb..13a2ee77d3c6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -4,6 +4,7 @@ 
  */
 
 #include <dt-bindings/clock/imx8mp-clock.h>
+#include <dt-bindings/interconnect/fsl,imx8mp.h>
 #include <dt-bindings/power/imx8mp-power.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -1019,6 +1020,27 @@  eqos: ethernet@30bf0000 {
 			};
 		};
 
+		noc: interconnect@32700000 {
+			compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc", "syscon";
+			reg = <0x32700000 0x100000>;
+			clocks = <&clk IMX8MP_CLK_NOC>;
+			#interconnect-cells = <1>;
+
+			operating-points-v2 = <&noc_opp_table>;
+
+			noc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200M {
+					opp-hz = /bits/ 64 <200000000>;
+				};
+
+				opp-1000M {
+					opp-hz = /bits/ 64 <1000000000>;
+				};
+			};
+		};
+
 		aips4: bus@32c00000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x32c00000 0x400000>;