| Message ID | 20220704161541.943696-3-viorel.suman@oss.nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: arm: freescale: Switch fsl,scu from txt to yaml | expand |
On Mon, 04 Jul 2022 19:15:28 +0300, Viorel Suman (OSS) wrote: > From: Abel Vesa <abel.vesa@nxp.com> > > In order to replace the fsl,scu txt file from bindings/arm/freescale, > we need to split it between the right subsystems. This patch documents > separately the 'iomux/pinctrl' child node of the SCU main node. > > Signed-off-by: Abel Vesa <abel.vesa@nxp.com> > Signed-off-by: Viorel Suman <viorel.suman@nxp.com> > --- > .../bindings/arm/freescale/fsl,scu.txt | 40 ---------- > .../bindings/pinctrl/fsl,scu-pinctrl.yaml | 74 +++++++++++++++++++ > 2 files changed, 74 insertions(+), 40 deletions(-) > create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.example.dtb: iomuxc@400e8000: lpuart1grp:fsl,pins:0: [364, 944, 1568, 0, 0, 241, 368, 948, 1564, 0, 0, 241] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.example.dtb: pinctrl: lpuart0grp:fsl,pins:0: [111, 0, 100663328, 112, 0, 100663328] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.example.dtb: pinctrl@443c0000: uart3grp:fsl,pins:0: [72, 504, 1052, 1, 0, 73, 76, 508, 1048, 1, 0, 73] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.example.dtb: pinctrl@30330000: uart5grp:fsl,pins:0: [352, 976, 1812, 1, 0, 126, 356, 980, 0, 1, 0, 118] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.example.dtb: pinctrl@302c0000: gpio1-grp:fsl,pins:0: [8, 56, 0, 0, 0, 89, 12, 60, 0, 0, 0, 89] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.example.dtb: iomuxc@401f8000: lpuart1grp:fsl,pins:0: [236, 732, 0, 2, 0, 241, 240, 736, 0, 2, 0, 241] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.example.dtb: pinctrl@30330000: uart2grp:fsl,pins:0: [572, 1188, 1276, 0, 0, 320, 576, 1192, 0, 0, 0, 320] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.example.dtb: pinctrl@30330000: uart1grp:fsl,pins:0: [564, 1180, 1268, 0, 0, 73, 568, 1184, 1268, 0, 0, 73] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.example.dtb: pinctrl@30330000: uart2grp:fsl,pins:0: [572, 1188, 1276, 0, 0, 320, 576, 1192, 0, 0, 0, 320] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.example.dtb: pinctrl@30330000: uart2grp:fsl,pins:0: [552, 1160, 1520, 0, 6, 73, 552, 1160, 0, 0, 0, 73] is too long From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt index ef7f5222ac48..5ec2a031194e 100644 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt @@ -79,33 +79,7 @@ Required properties: See detailed Resource ID list from: include/dt-bindings/firmware/imx/rsrc.h -Pinctrl bindings based on SCU Message Protocol ------------------------------------------------------------- - -This binding uses the i.MX common pinctrl binding[3]. - -Required properties: -- compatible: Should be one of: - "fsl,imx8qm-iomuxc", - "fsl,imx8qxp-iomuxc", - "fsl,imx8dxl-iomuxc". - -Required properties for Pinctrl sub nodes: -- fsl,pins: Each entry consists of 3 integers which represents - the mux and config setting for one pin. The first 2 - integers <pin_id mux_mode> are specified using a - PIN_FUNC_ID macro, which can be found in - <dt-bindings/pinctrl/pads-imx8qm.h>, - <dt-bindings/pinctrl/pads-imx8qxp.h>, - <dt-bindings/pinctrl/pads-imx8dxl.h>. - The last integer CONFIG is the pad setting value like - pull-up on this pin. - - Please refer to i.MX8QXP Reference Manual for detailed - CONFIG settings. - [2] Documentation/devicetree/bindings/power/power-domain.yaml -[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt RTC bindings based on SCU Message Protocol ------------------------------------------------------------ @@ -184,18 +158,6 @@ firmware { &lsio_mu1 1 3 &lsio_mu1 3 3>; - iomuxc { - compatible = "fsl,imx8qxp-iomuxc"; - - pinctrl_lpuart0: lpuart0grp { - fsl,pins = < - SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 - SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 - >; - }; - ... - }; - ocotp: imx8qx-ocotp { compatible = "fsl,imx8qxp-scu-ocotp"; #address-cells = <1>; @@ -234,7 +196,5 @@ firmware { serial@5a060000 { ... - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpuart0>; power-domains = <&pd IMX_SC_R_UART_0>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml new file mode 100644 index 000000000000..45ea565ce238 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX SCU Client Device Node - Pinctrl bindings based on SCU Message Protocol + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: i.MX SCU Client Device Node + Client nodes are maintained as children of the relevant IMX-SCU device node. + This binding uses the i.MX common pinctrl binding. + (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt) + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - fsl,imx8qm-iomuxc + - fsl,imx8qxp-iomuxc + - fsl,imx8dxl-iomuxc + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 3 integers and represents the pin ID, the mux value + and pad setting for the pin. The first 2 integers - pin_id and mux_val - are + specified using a PIN_FUNC_ID macro, which can be found in + <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is + the pad setting value like pull-up on this pin. Please refer to the + appropriate i.MX8 Reference Manual for detailed pad CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "pin_id" indicates the pin ID + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "fsl,imx8qxp-iomuxc"; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + 111 0 0x06000020 + 112 0 0x06000020 + >; + }; + };