@@ -2004,7 +2004,7 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >Description/Restrictions</td>
</tr>
<tr>
- <td rowspan="37" valign="top" >DRM</td>
+ <td rowspan="38" valign="top" >DRM</td>
<td valign="top" >Generic</td>
<td valign="top" >“rotation”</td>
<td valign="top" >BITMASK</td>
@@ -2256,7 +2256,7 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >property to suggest an Y offset for a connector</td>
</tr>
<tr>
- <td rowspan="3" valign="top" >Optional</td>
+ <td rowspan="4" valign="top" >Optional</td>
<td valign="top" >“scaling mode”</td>
<td valign="top" >ENUM</td>
<td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td>
@@ -2280,6 +2280,16 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >TBD</td>
</tr>
<tr>
+ <td valign="top" > "zpos" </td>
+ <td valign="top" >RANGE</td>
+ <td valign="top" >Min=0, Max=255</td>
+ <td valign="top" >Plane</td>
+ <td valign="top" >Plane's 'z' position during blending (0 for background, 255 for frontmost).
+ If two planes assigned to same CRTC have equal zpos values, the plane with higher plane
+ id is treated as closer to front. Can be IMMUTABLE if driver doesn't support changing
+ plane's order.</td>
+ </tr>
+ <tr>
<td rowspan="20" valign="top" >i915</td>
<td rowspan="2" valign="top" >Generic</td>
<td valign="top" >"Broadcast RGB"</td>
@@ -614,6 +614,8 @@ int drm_atomic_plane_set_property(struct drm_plane *plane,
state->src_h = val;
} else if (property == config->rotation_property) {
state->rotation = val;
+ } else if (property == config->zpos_property) {
+ state->zpos = val;
} else if (plane->funcs->atomic_set_property) {
return plane->funcs->atomic_set_property(plane, state,
property, val);
@@ -670,6 +672,8 @@ drm_atomic_plane_get_property(struct drm_plane *plane,
*val = state->src_h;
} else if (property == config->rotation_property) {
*val = state->rotation;
+ } else if (property == config->zpos_property) {
+ *val = state->zpos;
} else if (plane->funcs->atomic_get_property) {
return plane->funcs->atomic_get_property(plane, state, property, val);
} else {
@@ -31,6 +31,7 @@
#include <drm/drm_crtc_helper.h>
#include <drm/drm_atomic_helper.h>
#include <linux/fence.h>
+#include <linux/sort.h>
/**
* DOC: overview
@@ -2781,3 +2782,54 @@ void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
kfree(state);
}
EXPORT_SYMBOL(drm_atomic_helper_connector_destroy_state);
+
+/**
+ * __drm_atomic_helper_plane_zpos_cmp - compare zpos value of two planes
+ * @a: pointer to first plane
+ * @b: pointer to second plane
+ *
+ * This function is used for comparing two planes while sorting them to assign
+ * a normalized zpos values. Planes are compared first by their zpos values,
+ * then in case they equal, by plane id.
+ */
+static int __drm_atomic_helper_plane_zpos_cmp(const void *a, const void *b)
+{
+ const struct drm_plane *pa = *(struct drm_plane **)a;
+ const struct drm_plane *pb = *(struct drm_plane **)b;
+ int zpos_a = 0, zpos_b = 0;
+
+ if (pa->state)
+ zpos_a = pa->state->zpos << 16;
+ if (pb->state)
+ zpos_b = pb->state->zpos << 16;
+
+ zpos_a += pa->base.id;
+ zpos_b += pb->base.id;
+
+ return zpos_a - zpos_b;
+}
+
+/**
+ * drm_atomic_helper_normalize_zpos - calculate normalized zpos values
+ * @planes: arrays of pointer to planes to consider for normalization
+ * @count: number of planes in the above array
+ *
+ * This function takes arrays of pointers to planes and calculates normalized
+ * zpos value for them taking into account each planes[i]->state->zpos value
+ * and plane's id (if zpos equals). The plane[i]->state->normalized_zpos is
+ * then filled with uniqe values from 0 to count-1.
+ * Note: a side effect of this function is the fact that the planes array will
+ * be modified (sorted). It is up to the called to construct planes array with
+ * all planes that have been assigned to given crtc.
+ */
+void drm_atomic_helper_normalize_zpos(struct drm_plane *planes[], int count)
+{
+ int i;
+
+ sort(planes, count, sizeof(struct drm_plane *),
+ __drm_atomic_helper_plane_zpos_cmp, NULL);
+ for (i = 0; i < count; i++)
+ if (planes[i]->state)
+ planes[i]->state->normalized_zpos = i;
+}
+EXPORT_SYMBOL(drm_atomic_helper_normalize_zpos);
@@ -5879,6 +5879,19 @@ struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev,
}
EXPORT_SYMBOL(drm_mode_create_rotation_property);
+struct drm_property *drm_plane_create_zpos_property(struct drm_device *dev)
+{
+ return drm_property_create_range(dev, 0, "zpos", 0, 255);
+}
+EXPORT_SYMBOL(drm_plane_create_zpos_property);
+
+struct drm_property *drm_plane_create_zpos_immutable_property(struct drm_device *dev)
+{
+ return drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "zpos",
+ 0, 255);
+}
+EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property);
+
/**
* DOC: Tile group
*
@@ -141,6 +141,8 @@ __drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
void drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
struct drm_connector_state *state);
+void drm_atomic_helper_normalize_zpos(struct drm_plane *planes[], int count);
+
/**
* drm_atomic_crtc_for_each_plane - iterate over planes currently attached to CRTC
* @plane: the loop cursor
@@ -1243,6 +1243,9 @@ struct drm_connector {
* plane (in 16.16)
* @src_w: width of visible portion of plane (in 16.16)
* @src_h: height of visible portion of plane (in 16.16)
+ * @zpos: priority of the given plane on crtc (optional)
+ * @normalized_zpos: normalized value of zpos: uniqe, range from 0 to
+ * (number of planes - 1) for given crtc
* @state: backpointer to global drm_atomic_state
*/
struct drm_plane_state {
@@ -1263,6 +1266,10 @@ struct drm_plane_state {
/* Plane rotation */
unsigned int rotation;
+ /* Plane zpos */
+ unsigned int zpos;
+ unsigned int normalized_zpos;
+
struct drm_atomic_state *state;
};
@@ -2083,6 +2090,8 @@ struct drm_mode_config {
struct drm_property *tile_property;
struct drm_property *plane_type_property;
struct drm_property *rotation_property;
+ struct drm_property *zpos_property;
+ struct drm_property *zpos_immutable_property;
struct drm_property *prop_src_x;
struct drm_property *prop_src_y;
struct drm_property *prop_src_w;
@@ -2484,6 +2493,10 @@ extern struct drm_property *drm_mode_create_rotation_property(struct drm_device
extern unsigned int drm_rotation_simplify(unsigned int rotation,
unsigned int supported_rotations);
+extern struct drm_property *drm_plane_create_zpos_property(struct drm_device *dev);
+
+extern struct drm_property *drm_plane_create_zpos_immutable_property(struct drm_device *dev);
+
/* Helpers */
static inline struct drm_plane *drm_plane_find(struct drm_device *dev,
This patch adds support for generic plane's zpos property property with well-defined semantics: - added zpos properties to drm core and plane state structures - added helpers for normalizing zpos properties of given set of planes - well defined semantics: planes are sorted by zpos values and then plane id value if zpos equals Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- Documentation/DocBook/gpu.tmpl | 14 ++++++++-- drivers/gpu/drm/drm_atomic.c | 4 +++ drivers/gpu/drm/drm_atomic_helper.c | 52 +++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/drm_crtc.c | 13 ++++++++++ include/drm/drm_atomic_helper.h | 2 ++ include/drm/drm_crtc.h | 13 ++++++++++ 6 files changed, 96 insertions(+), 2 deletions(-) -- 1.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html