@@ -146,6 +146,8 @@ struct imx290 {
struct v4l2_ctrl_handler ctrls;
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
+ struct v4l2_ctrl *hblank;
+ struct v4l2_ctrl *vblank;
struct mutex lock;
};
@@ -642,6 +644,20 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
if (imx290->pixel_rate)
__v4l2_ctrl_s_ctrl_int64(imx290->pixel_rate,
imx290_calc_pixel_rate(imx290));
+
+ if (imx290->hblank) {
+ unsigned int hblank = mode->hmax - mode->width;
+
+ __v4l2_ctrl_modify_range(imx290->hblank, hblank, hblank,
+ 1, hblank);
+ }
+
+ if (imx290->vblank) {
+ unsigned int vblank = IMX290_VMAX_DEFAULT - mode->height;
+
+ __v4l2_ctrl_modify_range(imx290->vblank, vblank, vblank,
+ 1, vblank);
+ }
}
*format = fmt->format;
@@ -880,9 +896,10 @@ static const struct media_entity_operations imx290_subdev_entity_ops = {
static int imx290_ctrl_init(struct imx290 *imx290)
{
+ unsigned int blank;
int ret;
- v4l2_ctrl_handler_init(&imx290->ctrls, 5);
+ v4l2_ctrl_handler_init(&imx290->ctrls, 7);
imx290->ctrls.lock = &imx290->lock;
v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
@@ -910,6 +927,26 @@ static int imx290_ctrl_init(struct imx290 *imx290)
ARRAY_SIZE(imx290_test_pattern_menu) - 1,
0, 0, imx290_test_pattern_menu);
+ /*
+ * Horizontal blanking is controlled through the HMAX register, which
+ * contains a line length in INCK clock units. The INCK frequency is
+ * fixed to 74.25 MHz. The HMAX value is currently fixed to 1100,
+ * convert it to a number of pixels based on the nominal pixel rate.
+ */
+ blank = imx290->current_mode->hmax - imx290->current_mode->width;
+ imx290->hblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
+ V4L2_CID_HBLANK, blank, blank, 1,
+ blank);
+ if (imx290->hblank)
+ imx290->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+ blank = IMX290_VMAX_DEFAULT - imx290->current_mode->height;
+ imx290->vblank = v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
+ V4L2_CID_VBLANK, blank, blank, 1,
+ blank);
+ if (imx290->vblank)
+ imx290->vblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
imx290->sd.ctrl_handler = &imx290->ctrls;
if (imx290->ctrls.error) {
Add support for the V4L2_CID_HBLANK and V4L2_CID_VBLANK controls to the imx290 driver. Make the controls read-only to start with, to report the values to userspace for timing calculation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- drivers/media/i2c/imx290.c | 39 +++++++++++++++++++++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-)