diff mbox series

[v3,02/10] DONOTMERGE: arm64: dts: ti: Add pinmux and irq mapping for TPS65219 external interrupts

Message ID 20220805121852.21254-3-jneanne@baylibre.com
State Superseded
Headers show
Series Add support for TI TPS65219 PMIC. | expand

Commit Message

jerome Neanne Aug. 5, 2022, 12:18 p.m. UTC 
Interrupt occurring on PMIC TPS65219 is propagated to SOC
through EXTINTn pin connected to gic500 interrupt controller

Needed for driver testing but official board support pending.
TI commitment is required before board upstream kick-off.

Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 565b50810579..1f7ce60ecb57 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -294,6 +294,12 @@ 
 			AM64X_IOPAD(0x00b8, PIN_INPUT, 7) /* (Y7) PRG1_PRU0_GPO0.GPIO0_45 */
 		>;
 	};
+
+	pmic_irq_pins_default: pmic-irq-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0278, PIN_INPUT, 0) /* (C19) EXTINTn */
+		>;
+	};
 };
 
 &mcu_uart0 {
@@ -352,6 +358,10 @@ 
 		compatible = "ti,tps65219";
 		reg = <0x30>;
 		system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins_default>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
 
 		buck1-supply = <&vcc_3v3_sys>;
 		buck2-supply = <&vcc_3v3_sys>;