diff mbox series

[6/8] phy: allwinner: phy-sun6i-mipi-dphy: Set enable bit last

Message ID 20220812075603.59375-7-samuel@sholland.org
State Accepted
Commit cb7f49a31597066b25c9bc6a0bf0781454dd4d2b
Headers show
Series [1/8] dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property | expand

Commit Message

Samuel Holland Aug. 12, 2022, 7:56 a.m. UTC 
The A100 variant of the DPHY requires configuring the analog registers
before setting the global enable bit. Since this order also works on the
other variants, always use it, to minimize the differences between them.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 625c6e1e9990..9698d68d0db7 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -183,10 +183,6 @@  static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(3) |
 		     SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(3));
 
-	regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
-		     SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
-		     SUN6I_DPHY_GCTL_EN);
-
 	regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG,
 		     SUN6I_DPHY_ANA0_REG_PWS |
 		     SUN6I_DPHY_ANA0_REG_DMPC |
@@ -244,6 +240,10 @@  static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy)
 			   SUN6I_DPHY_ANA2_EN_P2S_CPU_MASK,
 			   SUN6I_DPHY_ANA2_EN_P2S_CPU(lanes_mask));
 
+	regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG,
+		     SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) |
+		     SUN6I_DPHY_GCTL_EN);
+
 	return 0;
 }