new file mode 100644
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+ The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+ sensor with square pixel array and 1.58 M effective pixels. This chip
+ features a global shutter with variable charge-integration time. It is
+ programmable through I2C and 4-wire interfaces. The sensor output is
+ available via CSI-2 serial data output (1 Lane).
+
+properties:
+ compatible:
+ enum:
+ - sony,imx296
+ - sony,imx296ll
+ - sony,imx296lq
+ description:
+ The IMX296 sensor exists in two different models, a colour variant
+ (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the
+ model through registers, allowing for auto-detection with a common
+ "sony,imx296" compatible string. However, some camera modules disable the
+ ability to read the sensor model register, which disables this feature.
+ In those cases, the exact model needs to be specified as "sony,imx296ll"
+ or "sony,imx296lq".
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
+ items:
+ - const: inck
+
+ avdd-supply:
+ description: Analog power supply (3.3V)
+
+ dvdd-supply:
+ description: Digital power supply (1.2V)
+
+ ovdd-supply:
+ description: Interface power supply (1.8V)
+
+ reset-gpios:
+ description: Sensor reset (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - avdd-supply
+ - dvdd-supply
+ - ovdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ imx296: camera-sensor@1a {
+ compatible = "sony,imx296";
+ reg = <0x1a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_rear_default>;
+
+ clocks = <&gcc 90>;
+ clock-names = "inck";
+
+ avdd-supply = <&camera_vdda_3v3>;
+ dvdd-supply = <&camera_vddd_1v2>;
+ ovdd-supply = <&camera_vddo_1v8>;
+
+ reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+ port {
+ imx296_ep: endpoint {
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
+ };
+
+...
@@ -18959,6 +18959,14 @@ T: git git://linuxtv.org/media_tree.git
F: Documentation/devicetree/bindings/media/i2c/imx290.txt
F: drivers/media/i2c/imx290.c
+SONY IMX296 SENSOR DRIVER
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+L: linux-media@vger.kernel.org
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
+
SONY IMX319 SENSOR DRIVER
M: Bingbu Cao <bingbu.cao@intel.com>
L: linux-media@vger.kernel.org