new file mode 100644
@@ -0,0 +1,60 @@
+Device-Tree bindings for DesignWare DSI Host Controller v1.20a driver
+
+A DSI Host Controller resides in the middle of display controller and external
+HDMI converter.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-dsi".
+- reg: physical base address and length of the controller's registers.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- ports: contains DSI controller input and output sub port. The input port
+ connects to ADE output port, and output port connected to external HDMI
+ endpoint. See Documentation/devicetree/bindings/graph.txt for more device
+ graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+ dsi: dsi@0xf4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk_dsi";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <&ade_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>; /* 1 for output port */
+ dsi_out: endpoint {
+ remote-endpoint = <&adv7533_in>;
+ };
+ };
+ };
+ };
+
+Board specific:
+ i2c2: i2c@f7102000 {
+ ...
+
+ adv7533: adv7533@39 {
+ ...
+
+ port {
+ adv7533_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
new file mode 100644
@@ -0,0 +1,56 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be "hisilicon,hi6220-ade".
+- reg: physical base address and length of the controller's registers.
+- reg-names: name of physical base.
+- interrupt: the interrupt number.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- assigned-clocks: clocks to be assigned rate.
+- assigned-clock-rates: clock rates which are assigned to assigned-clocks.
+- port: the output port. This contains one endpoint subnode, with its
+ remote-endpoint set to the phandle of the connected DSI endpoint.
+ See Documentation/devicetree/bindings/graph.txt for more device graph info.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+ ade: ade@f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>,
+ <0x0 0xf4410000 0x0 0x1000>,
+ <0x0 0xf4520000 0x0 0x1000>;
+ reg-names = "ade_base",
+ "media_base",
+ "media_noc_base";
+
+ interrupts = <0 115 4>; /* ldi interrupt */
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>;
+ /*clock name*/
+ clock-names = "clk_ade_core",
+ "clk_codec_jpeg",
+ "clk_ade_pix";
+
+ assigned-clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>;
+ assigned-clock-rates = <360000000>, <288000000>;
+ dma-coherent;
+
+ port {
+ ade_out: endpoint {
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+ };
Add ADE display controller binding doc. Add DesignWare DSI Host Controller v1.20a binding doc. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> v3: - Make ade as the drm master node. - Use assigned-clocks to set clock rate. - Use ports to connect display relavant nodes. v2: - Move dt binding docs to bindings/display/hisilicon directory. --- .../bindings/display/hisilicon/dw-dsi.txt | 60 ++++++++++++++++++++++ .../bindings/display/hisilicon/hisi-ade.txt | 56 ++++++++++++++++++++ 2 files changed, 116 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html