diff mbox series

arm64: dts: qcom: sc7280: assign DSI clocks

Message ID 20220924092909.175418-1-dmitry.baryshkov@linaro.org
State New
Headers show
Series arm64: dts: qcom: sc7280: assign DSI clocks | expand

Commit Message

Dmitry Baryshkov Sept. 24, 2022, 9:29 a.m. UTC 
The driver (and the DT schema) requires us to assign DSI clocks in the
DT node, so that the clock tree is setup propertly.

Fixes: 43137272f0bc ("arm64: dts: qcom: sc7280: Add DSI display nodes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 13d7f267b289..d5c01ee1d2fa 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3636,6 +3636,10 @@  mdss_dsi: dsi@ae94000 {
 					      "iface",
 					      "bus";
 
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;