| Message ID | 20220930191049.123256-2-konrad.dybcio@somainline.org |
|---|---|
| State | Accepted |
| Commit | 5dcc6587fde26fa03fe6993278d9bd01daed09b1 |
| Headers | show |
| Series | [1/8] arm64: dts: qcom: sdm845-tama: Add display nodes | expand |
On 30/09/2022 21:10, Konrad Dybcio wrote: > Add required nodes to support display on XZ2/XZ2c. XZ3 has a > different power rail setup and needs to be handled separately. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > .../qcom/sdm845-sony-xperia-tama-akari.dts | 4 + > .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 44 ++++++++- > .../qcom/sdm845-sony-xperia-tama-apollo.dts | 6 ++ > .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 96 +++++++++++++++++++ > 4 files changed, 149 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts > index 34f84f1f1eb4..d97b7f1e7140 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts > @@ -11,3 +11,7 @@ / { > model = "Sony Xperia XZ2"; > compatible = "sony,akari-row", "qcom,sdm845"; > }; > + > +&panel { > + compatible = "sony,td4353-jdi-tama"; git grep suggests it is not documented. Is it coming via different patchset? > +}; > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts > index 2f5e12deaada..2a16305ac5da 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts > @@ -10,9 +10,51 @@ > / { > model = "Sony Xperia XZ3"; > compatible = "sony,akatsuki-row", "qcom,sdm845"; > + > + /* Fixed DCDC for the OLED panel */ > + ts_vddio_supply: ts-vddio-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ts_vddio"; > + > + regulator-min-microvolt = <1840000>; > + regulator-max-microvolt = <1840000>; > + > + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > + }; > +}; > + > +&ibb { > + status = "disabled"; > +}; > + > +&lab { > + status = "disabled"; > +}; > + > +&panel { > + /* Akatsuki uses an OLED panel. */ > + /delete-property/ backlight; > + /delete-property/ vsp-supply; > + /delete-property/ vsn-supply; > + /delete-property/ treset-gpios; > +}; > + > +&pmi8998_wled { > + status = "disabled"; > +}; > + > +&tlmm { > + ts_vddio_en: ts-vddio-en { ts-vddio-en-state DT schema is coming: https://lore.kernel.org/linux-devicetree/20220930200529.331223-1-krzysztof.kozlowski@linaro.org/T/#t > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + output-high; > + }; Best regards, Krzysztof
On 30.09.2022 22:10, Krzysztof Kozlowski wrote: > On 30/09/2022 21:10, Konrad Dybcio wrote: >> Add required nodes to support display on XZ2/XZ2c. XZ3 has a >> different power rail setup and needs to be handled separately. >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> >> --- >> .../qcom/sdm845-sony-xperia-tama-akari.dts | 4 + >> .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 44 ++++++++- >> .../qcom/sdm845-sony-xperia-tama-apollo.dts | 6 ++ >> .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 96 +++++++++++++++++++ >> 4 files changed, 149 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >> index 34f84f1f1eb4..d97b7f1e7140 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >> @@ -11,3 +11,7 @@ / { >> model = "Sony Xperia XZ2"; >> compatible = "sony,akari-row", "qcom,sdm845"; >> }; >> + >> +&panel { >> + compatible = "sony,td4353-jdi-tama"; > > git grep suggests it is not documented. Is it coming via different patchset? As mentioned in the cover letter, yes. > >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts >> index 2f5e12deaada..2a16305ac5da 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts >> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts >> @@ -10,9 +10,51 @@ >> / { >> model = "Sony Xperia XZ3"; >> compatible = "sony,akatsuki-row", "qcom,sdm845"; >> + >> + /* Fixed DCDC for the OLED panel */ >> + ts_vddio_supply: ts-vddio-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "ts_vddio"; >> + >> + regulator-min-microvolt = <1840000>; >> + regulator-max-microvolt = <1840000>; >> + >> + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + regulator-boot-on; >> + }; >> +}; >> + >> +&ibb { >> + status = "disabled"; >> +}; >> + >> +&lab { >> + status = "disabled"; >> +}; >> + >> +&panel { >> + /* Akatsuki uses an OLED panel. */ >> + /delete-property/ backlight; >> + /delete-property/ vsp-supply; >> + /delete-property/ vsn-supply; >> + /delete-property/ treset-gpios; >> +}; >> + >> +&pmi8998_wled { >> + status = "disabled"; >> +}; >> + >> +&tlmm { >> + ts_vddio_en: ts-vddio-en { > > ts-vddio-en-state > > DT schema is coming: > https://lore.kernel.org/linux-devicetree/20220930200529.331223-1-krzysztof.kozlowski@linaro.org/T/#t Right, missed this one. Will fix. Konrad > >> + pins = "gpio133"; >> + function = "gpio"; >> + drive-strength = <2>; >> + bias-disable; >> + output-high; >> + }; > > Best regards, > Krzysztof >
On 30/09/2022 22:10, Konrad Dybcio wrote: > > > On 30.09.2022 22:10, Krzysztof Kozlowski wrote: >> On 30/09/2022 21:10, Konrad Dybcio wrote: >>> Add required nodes to support display on XZ2/XZ2c. XZ3 has a >>> different power rail setup and needs to be handled separately. >>> >>> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> >>> --- >>> .../qcom/sdm845-sony-xperia-tama-akari.dts | 4 + >>> .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 44 ++++++++- >>> .../qcom/sdm845-sony-xperia-tama-apollo.dts | 6 ++ >>> .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 96 +++++++++++++++++++ >>> 4 files changed, 149 insertions(+), 1 deletion(-) >>> >>> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >>> index 34f84f1f1eb4..d97b7f1e7140 100644 >>> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >>> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >>> @@ -11,3 +11,7 @@ / { >>> model = "Sony Xperia XZ2"; >>> compatible = "sony,akari-row", "qcom,sdm845"; >>> }; >>> + >>> +&panel { >>> + compatible = "sony,td4353-jdi-tama"; >> >> git grep suggests it is not documented. Is it coming via different patchset? > As mentioned in the cover letter, yes. I didn't get it. Neither did lore: https://lore.kernel.org/linux-devicetree/20220930191049.123256-1-konrad.dybcio@somainline.org/ "Message-ID <20220930191049.123256-1-konrad.dybcio@somainline.org> not found" Best regards, Krzysztof
On 2022-09-30 21:10:42, Konrad Dybcio wrote: > Add required nodes to support display on XZ2/XZ2c. XZ3 has a > different power rail setup and needs to be handled separately. > > Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> > --- > .../qcom/sdm845-sony-xperia-tama-akari.dts | 4 + > .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 44 ++++++++- > .../qcom/sdm845-sony-xperia-tama-apollo.dts | 6 ++ > .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 96 +++++++++++++++++++ > 4 files changed, 149 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts > index 34f84f1f1eb4..d97b7f1e7140 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts > @@ -11,3 +11,7 @@ / { > model = "Sony Xperia XZ2"; > compatible = "sony,akari-row", "qcom,sdm845"; > }; > + > +&panel { > + compatible = "sony,td4353-jdi-tama"; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts > index 2f5e12deaada..2a16305ac5da 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts > @@ -10,9 +10,51 @@ > / { > model = "Sony Xperia XZ3"; > compatible = "sony,akatsuki-row", "qcom,sdm845"; > + > + /* Fixed DCDC for the OLED panel */ > + ts_vddio_supply: ts-vddio-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "ts_vddio"; > + > + regulator-min-microvolt = <1840000>; > + regulator-max-microvolt = <1840000>; > + > + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > + }; > +}; > + > +&ibb { > + status = "disabled"; > +}; > + > +&lab { > + status = "disabled"; > +}; > + > +&panel { > + /* Akatsuki uses an OLED panel. */ > + /delete-property/ backlight; > + /delete-property/ vsp-supply; > + /delete-property/ vsn-supply; > + /delete-property/ treset-gpios; This looks to have been a last-minute rename to touch-reset-gpios > +}; > + > +&pmi8998_wled { > + status = "disabled"; > +}; > + > +&tlmm { > + ts_vddio_en: ts-vddio-en { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + output-high; > + }; > }; > > -/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ > &vreg_l14a_1p8 { > regulator-min-microvolt = <1840000>; > regulator-max-microvolt = <1840000>; > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts > index c9e62c72f60e..cd056f78070f 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts > @@ -11,3 +11,9 @@ / { > model = "Sony Xperia XZ2 Compact"; > compatible = "sony,apollo-row", "qcom,sdm845"; > }; > + > +&panel { > + compatible = "sony,td4353-jdi-tama"; > + height-mm = <112>; > + width-mm = <56>; > +}; > diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > index 51ee42e3c995..ac8eb59ed010 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi > @@ -326,6 +326,46 @@ vreg_s3c_0p6: smps3 { > }; > }; > > +&dsi0 { > + vdda-supply = <&vreg_l26a_1p2>; > + status = "okay"; > + > + panel: panel@0 { > + /* The compatible is assigned in device DTs. */ > + reg = <0>; > + > + backlight = <&pmi8998_wled>; > + vddio-supply = <&vreg_l14a_1p8>; > + vsp-supply = <&lab>; > + vsn-supply = <&ibb>; > + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; > + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; Here. - Marijn
On 1.10.2022 16:54, Marijn Suijten wrote: > On 2022-09-30 21:10:42, Konrad Dybcio wrote: >> Add required nodes to support display on XZ2/XZ2c. XZ3 has a >> different power rail setup and needs to be handled separately. >> >> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> >> --- >> .../qcom/sdm845-sony-xperia-tama-akari.dts | 4 + >> .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 44 ++++++++- >> .../qcom/sdm845-sony-xperia-tama-apollo.dts | 6 ++ >> .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 96 +++++++++++++++++++ >> 4 files changed, 149 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >> index 34f84f1f1eb4..d97b7f1e7140 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts >> @@ -11,3 +11,7 @@ / { >> model = "Sony Xperia XZ2"; >> compatible = "sony,akari-row", "qcom,sdm845"; >> }; >> + >> +&panel { >> + compatible = "sony,td4353-jdi-tama"; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts >> index 2f5e12deaada..2a16305ac5da 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts >> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts >> @@ -10,9 +10,51 @@ >> / { >> model = "Sony Xperia XZ3"; >> compatible = "sony,akatsuki-row", "qcom,sdm845"; >> + >> + /* Fixed DCDC for the OLED panel */ >> + ts_vddio_supply: ts-vddio-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "ts_vddio"; >> + >> + regulator-min-microvolt = <1840000>; >> + regulator-max-microvolt = <1840000>; >> + >> + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; >> + enable-active-high; >> + regulator-boot-on; >> + }; >> +}; >> + >> +&ibb { >> + status = "disabled"; >> +}; >> + >> +&lab { >> + status = "disabled"; >> +}; >> + >> +&panel { >> + /* Akatsuki uses an OLED panel. */ >> + /delete-property/ backlight; >> + /delete-property/ vsp-supply; >> + /delete-property/ vsn-supply; >> + /delete-property/ treset-gpios; > > This looks to have been a last-minute rename to > > touch-reset-gpios Yep! Konrad > >> +}; >> + >> +&pmi8998_wled { >> + status = "disabled"; >> +}; >> + >> +&tlmm { >> + ts_vddio_en: ts-vddio-en { >> + pins = "gpio133"; >> + function = "gpio"; >> + drive-strength = <2>; >> + bias-disable; >> + output-high; >> + }; >> }; >> >> -/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ >> &vreg_l14a_1p8 { >> regulator-min-microvolt = <1840000>; >> regulator-max-microvolt = <1840000>; >> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts >> index c9e62c72f60e..cd056f78070f 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts >> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts >> @@ -11,3 +11,9 @@ / { >> model = "Sony Xperia XZ2 Compact"; >> compatible = "sony,apollo-row", "qcom,sdm845"; >> }; >> + >> +&panel { >> + compatible = "sony,td4353-jdi-tama"; >> + height-mm = <112>; >> + width-mm = <56>; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi >> index 51ee42e3c995..ac8eb59ed010 100644 >> --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi >> @@ -326,6 +326,46 @@ vreg_s3c_0p6: smps3 { >> }; >> }; >> >> +&dsi0 { >> + vdda-supply = <&vreg_l26a_1p2>; >> + status = "okay"; >> + >> + panel: panel@0 { >> + /* The compatible is assigned in device DTs. */ >> + reg = <0>; >> + >> + backlight = <&pmi8998_wled>; >> + vddio-supply = <&vreg_l14a_1p8>; >> + vsp-supply = <&lab>; >> + vsn-supply = <&ibb>; >> + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; >> + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; > > Here. > > - Marijn
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts index 34f84f1f1eb4..d97b7f1e7140 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akari.dts @@ -11,3 +11,7 @@ / { model = "Sony Xperia XZ2"; compatible = "sony,akari-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts index 2f5e12deaada..2a16305ac5da 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts @@ -10,9 +10,51 @@ / { model = "Sony Xperia XZ3"; compatible = "sony,akatsuki-row", "qcom,sdm845"; + + /* Fixed DCDC for the OLED panel */ + ts_vddio_supply: ts-vddio-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_vddio"; + + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <1840000>; + + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&ibb { + status = "disabled"; +}; + +&lab { + status = "disabled"; +}; + +&panel { + /* Akatsuki uses an OLED panel. */ + /delete-property/ backlight; + /delete-property/ vsp-supply; + /delete-property/ vsn-supply; + /delete-property/ treset-gpios; +}; + +&pmi8998_wled { + status = "disabled"; +}; + +&tlmm { + ts_vddio_en: ts-vddio-en { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; }; -/* For the future: WLED + LAB/IBB/OLEDB are not used on Akatsuki */ &vreg_l14a_1p8 { regulator-min-microvolt = <1840000>; regulator-max-microvolt = <1840000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts index c9e62c72f60e..cd056f78070f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-apollo.dts @@ -11,3 +11,9 @@ / { model = "Sony Xperia XZ2 Compact"; compatible = "sony,apollo-row", "qcom,sdm845"; }; + +&panel { + compatible = "sony,td4353-jdi-tama"; + height-mm = <112>; + width-mm = <56>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index 51ee42e3c995..ac8eb59ed010 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -326,6 +326,46 @@ vreg_s3c_0p6: smps3 { }; }; +&dsi0 { + vdda-supply = <&vreg_l26a_1p2>; + status = "okay"; + + panel: panel@0 { + /* The compatible is assigned in device DTs. */ + reg = <0>; + + backlight = <&pmi8998_wled>; + vddio-supply = <&vreg_l14a_1p8>; + vsp-supply = <&lab>; + vsn-supply = <&ibb>; + panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l1a_0p9>; + status = "okay"; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -358,6 +398,41 @@ &i2c14 { /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; +&ibb { + qcom,discharge-resistor-kohms = <300>; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <0>; + regulator-max-microamp = <800000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5700000>; + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-over-current-protection; + regulator-soft-start; + regulator-pull-down; +}; + +&mdss { + status = "okay"; +}; + +&pmi8998_wled { + default-brightness = <800>; + qcom,switching-freq = <800>; + qcom,ovp-millivolt = <29600>; + qcom,current-boost-limit = <970>; + qcom,current-limit-microamp = <20000>; + qcom,enabled-strings = <0 1 2 3>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -401,6 +476,27 @@ data { bias-pull-up; }; }; + + sde_dsi_active: sde-dsi-active-state { + pins = "gpio6", "gpio52"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + sde_dsi_sleep: sde-dsi-sleep-state { + pins = "gpio6", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sde_te_active_sleep: sde-te-active-sleep-state { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart6 {
Add required nodes to support display on XZ2/XZ2c. XZ3 has a different power rail setup and needs to be handled separately. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- .../qcom/sdm845-sony-xperia-tama-akari.dts | 4 + .../qcom/sdm845-sony-xperia-tama-akatsuki.dts | 44 ++++++++- .../qcom/sdm845-sony-xperia-tama-apollo.dts | 6 ++ .../dts/qcom/sdm845-sony-xperia-tama.dtsi | 96 +++++++++++++++++++ 4 files changed, 149 insertions(+), 1 deletion(-)