diff mbox series

[2/2] pinctrl: qcom: Add QDU1000/QRU1000 pinctrl driver

Message ID 20221001030546.28220-3-quic_molvera@quicinc.com
State New
Headers show
Series Add pinctrl support for QDU1000/QRU1000 SoCs | expand

Commit Message

Melody Olvera Oct. 1, 2022, 3:05 a.m. UTC 
Add pin control driver for the TLMM block found in the QDU1000
and QRU1000 SoC.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
---
 .../pinctrl/qcom,qdru1000-pinctrl.yaml        |  177 +-
 drivers/pinctrl/qcom/Kconfig                  |   10 +
 drivers/pinctrl/qcom/Makefile                 |    1 +
 drivers/pinctrl/qcom/pinctrl-qdru1000.c       |   59 +
 drivers/pinctrl/qcom/pinctrl-qdru1000.h       | 1896 +++++++++++++++++
 5 files changed, 2050 insertions(+), 93 deletions(-)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.c
 create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.h

Comments

Dmitry Baryshkov Oct. 1, 2022, 7:47 a.m. UTC | #1 
On Sat, 1 Oct 2022 at 06:07, Melody Olvera <quic_molvera@quicinc.com> wrote:
>
> Add pin control driver for the TLMM block found in the QDU1000
> and QRU1000 SoC.
>
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  .../pinctrl/qcom,qdru1000-pinctrl.yaml        |  177 +-
>  drivers/pinctrl/qcom/Kconfig                  |   10 +
>  drivers/pinctrl/qcom/Makefile                 |    1 +
>  drivers/pinctrl/qcom/pinctrl-qdru1000.c       |   59 +
>  drivers/pinctrl/qcom/pinctrl-qdru1000.h       | 1896 +++++++++++++++++
>  5 files changed, 2050 insertions(+), 93 deletions(-)
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.c
>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> index e8d938303231..42176247862c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml

This should go to the bindings patch, shan't it ?

> @@ -10,7 +10,11 @@ maintainers:

[skipped]

> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index f415c13caae0..c8a7d6e44a81 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -390,6 +390,16 @@ config PINCTRL_SM8450
>           Qualcomm Technologies Inc TLMM block found on the Qualcomm
>           Technologies Inc SM8450 platform.
>
> +config PINCTRL_QDRU1000
> +       tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
> +       depends on GPIOLIB && OF
> +       depends on PINCTRL_MSM
> +       help
> +         This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
> +         Qualcomm Technologies Inc TLMM block found on the Qualcomm
> +         Technologies Inc QDU1000 and QRU1000 platforms.
> +
> +
>  config PINCTRL_LPASS_LPI
>         tristate "Qualcomm Technologies Inc LPASS LPI pin controller driver"
>         select PINMUX
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index fbd64853a24d..431a845b4e2d 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -45,4 +45,5 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>  obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
>  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>  obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
> +obj-$(CONFIG_PINCTRL_QDRU1000) += pinctrl-qdru1000.o

Please move it before sc7180

>  obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
> new file mode 100644
> index 000000000000..8b931ff80bb4
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
> @@ -0,0 +1,59 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#include "pinctrl-msm.h"
> +#include "pinctrl-qdru1000.h"

No need to split all defs to a header file. Please merge them here.

> +
> +static const struct msm_pinctrl_soc_data qdru1000_tlmm = {
> +       .pins = qdru1000_pins,
> +       .npins = ARRAY_SIZE(qdru1000_pins),
> +       .functions = qdru1000_functions,
> +       .nfunctions = ARRAY_SIZE(qdru1000_functions),
> +       .groups = qdru1000_groups,
> +       .ngroups = ARRAY_SIZE(qdru1000_groups),
> +       .ngpios = 151,
> +};
> +
> +static int qdru1000_tlmm_probe(struct platform_device *pdev)
> +{
> +       return msm_pinctrl_probe(pdev, &qdru1000_tlmm);
> +}
> +
> +static const struct of_device_id qdru1000_tlmm_of_match[] = {
> +       { .compatible = "qcom,qdu1000-tlmm", },
> +       { .compatible = "qcom,qru1000-tlmm", },
> +       { },
> +};
> +
> +static struct platform_driver qdru1000_tlmm_driver = {
> +       .driver = {
> +               .name = "qdru1000-tlmm",
> +               .of_match_table = qdru1000_tlmm_of_match,
> +       },
> +       .probe = qdru1000_tlmm_probe,
> +       .remove = msm_pinctrl_remove,
> +};
> +
> +static int __init qdru1000_tlmm_init(void)
> +{
> +       return platform_driver_register(&qdru1000_tlmm_driver);
> +}
> +arch_initcall(qdru1000_tlmm_init);
> +
> +static void __exit qdru1000_tlmm_exit(void)
> +{
> +       platform_driver_unregister(&qdru1000_tlmm_driver);
> +}
> +module_exit(qdru1000_tlmm_exit);
> +
> +MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match);
> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
> new file mode 100644
> index 000000000000..3c1f703ae53b
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
> @@ -0,0 +1,1896 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#define FUNCTION(fname)                                        \
> +       [msm_mux_##fname] = {                           \
> +               .name = #fname,                         \
> +               .groups = fname##_groups,               \
> +               .ngroups = ARRAY_SIZE(fname##_groups),  \
> +       }
> +

[skipped]

> +
> +static const unsigned int sdc1_rclk_pins[] = { 151 };
> +static const unsigned int sdc1_clk_pins[] = { 152 };
> +static const unsigned int sdc1_cmd_pins[] = { 153 };
> +static const unsigned int sdc1_data_pins[] = { 154 };
> +
> +enum qdru1000_functions {
> +       msm_mux_gpio,
> +       msm_mux_CMO_PRI,
> +       msm_mux_SI5518_INT,

Ugh. Is there really a function for the Si5518 interrupt? And what is CMO_PRI?

> +       msm_mux_atest_char_start,
> +       msm_mux_atest_char_status0,
> +       msm_mux_atest_char_status1,
> +       msm_mux_atest_char_status2,
> +       msm_mux_atest_char_status3,
> +       msm_mux_atest_usb0_atereset,
> +       msm_mux_atest_usb0_testdataout00,
> +       msm_mux_atest_usb0_testdataout01,
> +       msm_mux_atest_usb0_testdataout02,
> +       msm_mux_atest_usb0_testdataout03,
> +       msm_mux_char_exec_pending,
> +       msm_mux_char_exec_release,
> +       msm_mux_cmu_rng_entropy0,
> +       msm_mux_cmu_rng_entropy1,
> +       msm_mux_cmu_rng_entropy2,
> +       msm_mux_cmu_rng_entropy3,
> +       msm_mux_dbg_out_clk,
> +       msm_mux_ddr_bist_complete,
> +       msm_mux_ddr_bist_fail,
> +       msm_mux_ddr_bist_start,
> +       msm_mux_ddr_bist_stop,
> +       msm_mux_ddr_pxi0_test,
> +       msm_mux_ddr_pxi1_test,
> +       msm_mux_ddr_pxi2_test,
> +       msm_mux_ddr_pxi3_test,
> +       msm_mux_ddr_pxi4_test,
> +       msm_mux_ddr_pxi5_test,
> +       msm_mux_ddr_pxi6_test,
> +       msm_mux_ddr_pxi7_test,
> +       msm_mux_eth012_int_n,
> +       msm_mux_eth345_int_n,
> +       msm_mux_eth6_int_n,
> +       msm_mux_gcc_gp1_clk,
> +       msm_mux_gcc_gp2_clk,
> +       msm_mux_gcc_gp3_clk,
> +       msm_mux_gps_pps_in,
> +       msm_mux_hardsync_pps_in,
> +       msm_mux_intr_c_raw0,
> +       msm_mux_intr_c_raw1,
> +       msm_mux_intr_c_raw2,
> +       msm_mux_jitter_bist_ref,
> +       msm_mux_pcie0,
> +       msm_mux_pcie0_clkreqn,
> +       msm_mux_pcie0_wake,
> +       msm_mux_phase_flag_status0,
> +       msm_mux_phase_flag_status1,
> +       msm_mux_phase_flag_status10,
> +       msm_mux_phase_flag_status11,
> +       msm_mux_phase_flag_status12,
> +       msm_mux_phase_flag_status13,
> +       msm_mux_phase_flag_status14,
> +       msm_mux_phase_flag_status15,
> +       msm_mux_phase_flag_status16,
> +       msm_mux_phase_flag_status17,
> +       msm_mux_phase_flag_status18,
> +       msm_mux_phase_flag_status19,
> +       msm_mux_phase_flag_status2,
> +       msm_mux_phase_flag_status20,
> +       msm_mux_phase_flag_status21,
> +       msm_mux_phase_flag_status22,
> +       msm_mux_phase_flag_status23,
> +       msm_mux_phase_flag_status24,
> +       msm_mux_phase_flag_status25,
> +       msm_mux_phase_flag_status26,
> +       msm_mux_phase_flag_status27,
> +       msm_mux_phase_flag_status28,
> +       msm_mux_phase_flag_status29,
> +       msm_mux_phase_flag_status3,
> +       msm_mux_phase_flag_status30,
> +       msm_mux_phase_flag_status31,
> +       msm_mux_phase_flag_status4,
> +       msm_mux_phase_flag_status5,
> +       msm_mux_phase_flag_status6,
> +       msm_mux_phase_flag_status7,
> +       msm_mux_phase_flag_status8,
> +       msm_mux_phase_flag_status9,
> +       msm_mux_pll_bist_sync,
> +       msm_mux_pll_clk_aux,
> +       msm_mux_prng_rosc_test0,
> +       msm_mux_prng_rosc_test1,
> +       msm_mux_prng_rosc_test2,
> +       msm_mux_prng_rosc_test3,
> +       msm_mux_qdss_cti_trig0,
> +       msm_mux_qdss_cti_trig1,
> +       msm_mux_qdss_cti_trig2,
> +       msm_mux_qdss_cti_trig3,
> +       msm_mux_qdss_cti_trig4,
> +       msm_mux_qdss_gpio_traceclk,
> +       msm_mux_qdss_gpio_tracectl,
> +       msm_mux_qdss_gpio_tracedata0,
> +       msm_mux_qdss_gpio_tracedata1,
> +       msm_mux_qdss_gpio_tracedata10,
> +       msm_mux_qdss_gpio_tracedata11,
> +       msm_mux_qdss_gpio_tracedata12,
> +       msm_mux_qdss_gpio_tracedata13,
> +       msm_mux_qdss_gpio_tracedata14,
> +       msm_mux_qdss_gpio_tracedata15,
> +       msm_mux_qdss_gpio_tracedata2,
> +       msm_mux_qdss_gpio_tracedata3,
> +       msm_mux_qdss_gpio_tracedata4,
> +       msm_mux_qdss_gpio_tracedata5,
> +       msm_mux_qdss_gpio_tracedata6,
> +       msm_mux_qdss_gpio_tracedata7,
> +       msm_mux_qdss_gpio_tracedata8,
> +       msm_mux_qdss_gpio_tracedata9,
> +       msm_mux_qlink0_enable,
> +       msm_mux_qlink0_request,
> +       msm_mux_qlink0_wmss_reset,
> +       msm_mux_qlink1_enable,
> +       msm_mux_qlink1_request,
> +       msm_mux_qlink1_wmss_reset,
> +       msm_mux_qlink2_enable,
> +       msm_mux_qlink2_request,
> +       msm_mux_qlink2_wmss_reset,
> +       msm_mux_qlink3_enable,
> +       msm_mux_qlink3_request,
> +       msm_mux_qlink3_wmss_reset,
> +       msm_mux_qlink4_enable,
> +       msm_mux_qlink4_request,
> +       msm_mux_qlink4_wmss_reset,
> +       msm_mux_qlink5_enable,
> +       msm_mux_qlink5_request,
> +       msm_mux_qlink5_wmss_reset,
> +       msm_mux_qlink6_enable,
> +       msm_mux_qlink6_request,
> +       msm_mux_qlink6_wmss_reset,
> +       msm_mux_qlink7_enable,
> +       msm_mux_qlink7_request,
> +       msm_mux_qlink7_wmss_reset,
> +       msm_mux_qspi_clk,
> +       msm_mux_qspi_cs_n,
> +       msm_mux_qspi_data_0,
> +       msm_mux_qspi_data_1,
> +       msm_mux_qspi_data_2,
> +       msm_mux_qspi_data_3,
> +       msm_mux_qup0_se0_l0,
> +       msm_mux_qup0_se0_l1,
> +       msm_mux_qup0_se0_l2,
> +       msm_mux_qup0_se0_l3,
> +       msm_mux_qup0_se1_l0,
> +       msm_mux_qup0_se1_l1,
> +       msm_mux_qup0_se1_l2,
> +       msm_mux_qup0_se1_l3,
> +       msm_mux_qup0_se2_l0,
> +       msm_mux_qup0_se2_l1,
> +       msm_mux_qup0_se2_l2,
> +       msm_mux_qup0_se2_l3,
> +       msm_mux_qup0_se3_l0,
> +       msm_mux_qup0_se3_l1,
> +       msm_mux_qup0_se3_l2,
> +       msm_mux_qup0_se3_l3,
> +       msm_mux_qup0_se4_l0,
> +       msm_mux_qup0_se4_l1,
> +       msm_mux_qup0_se4_l2,
> +       msm_mux_qup0_se4_l3,
> +       msm_mux_qup0_se5_l0,
> +       msm_mux_qup0_se5_l1,
> +       msm_mux_qup0_se5_l2,
> +       msm_mux_qup0_se5_l3,
> +       msm_mux_qup0_se6_l0,
> +       msm_mux_qup0_se6_l1,
> +       msm_mux_qup0_se6_l2,
> +       msm_mux_qup0_se6_l3,
> +       msm_mux_qup0_se7_l0,
> +       msm_mux_qup0_se7_l1,
> +       msm_mux_qup0_se7_l2,
> +       msm_mux_qup0_se7_l3,
> +       msm_mux_qup1_se0_l0,
> +       msm_mux_qup1_se0_l1,
> +       msm_mux_qup1_se0_l2,
> +       msm_mux_qup1_se0_l3,
> +       msm_mux_qup1_se1_l0,
> +       msm_mux_qup1_se1_l1,
> +       msm_mux_qup1_se1_l2,
> +       msm_mux_qup1_se1_l3,
> +       msm_mux_qup1_se2_l0,
> +       msm_mux_qup1_se2_l1,
> +       msm_mux_qup1_se2_l2,
> +       msm_mux_qup1_se2_l3,
> +       msm_mux_qup1_se3_l0,
> +       msm_mux_qup1_se3_l1,
> +       msm_mux_qup1_se3_l2,
> +       msm_mux_qup1_se3_l3,
> +       msm_mux_qup1_se4_l0,
> +       msm_mux_qup1_se4_l1,
> +       msm_mux_qup1_se4_l2,
> +       msm_mux_qup1_se4_l3,
> +       msm_mux_qup1_se5_l0,
> +       msm_mux_qup1_se5_l1,
> +       msm_mux_qup1_se5_l2,
> +       msm_mux_qup1_se5_l3,
> +       msm_mux_qup1_se6_l0,
> +       msm_mux_qup1_se6_l1,
> +       msm_mux_qup1_se6_l2,
> +       msm_mux_qup1_se6_l3,
> +       msm_mux_qup1_se6_l4,
> +       msm_mux_qup1_se6_l5,
> +       msm_mux_qup1_se6_l6,
> +       msm_mux_qup1_se7_l0,
> +       msm_mux_qup1_se7_l1,
> +       msm_mux_qup1_se7_l2,
> +       msm_mux_qup1_se7_l3,
> +       msm_mux_qup1_se7_l4,
> +       msm_mux_qup1_se7_l5,
> +       msm_mux_qup1_se7_l6,
> +       msm_mux_qup2_se0_l0,
> +       msm_mux_qup2_se0_l1,
> +       msm_mux_qup2_se0_l2,
> +       msm_mux_qup2_se0_l3,
> +       msm_mux_qup2_se1_l0,
> +       msm_mux_qup2_se1_l1,
> +       msm_mux_qup2_se1_l2,
> +       msm_mux_qup2_se1_l3,
> +       msm_mux_qup2_se2_l0,
> +       msm_mux_qup2_se2_l1,
> +       msm_mux_qup2_se2_l2,
> +       msm_mux_qup2_se2_l3,

We usually use the 'qupN' naming here.

Overall comment to the function definitions. You seem to be splitting
them too much. Please consider how other pinctrl drivers handle the
functions. There is no need to define a function per each pin. Group
them logically for all the pins belonging to a specific logical
function/device.

> +       msm_mux_smb_alert,
> +       msm_mux_smb_alert_n,
> +       msm_mux_smb_clk,
> +       msm_mux_smb_dat,
> +       msm_mux_tb_trig_sdc1,
> +       msm_mux_tgu_ch0_trigout,
> +       msm_mux_tgu_ch1_trigout,
> +       msm_mux_tgu_ch2_trigout,
> +       msm_mux_tgu_ch3_trigout,
> +       msm_mux_tgu_ch4_trigout,
> +       msm_mux_tgu_ch5_trigout,
> +       msm_mux_tgu_ch6_trigout,
> +       msm_mux_tgu_ch7_trigout,
> +       msm_mux_tmess_prng_rosc0,
> +       msm_mux_tmess_prng_rosc1,
> +       msm_mux_tmess_prng_rosc2,
> +       msm_mux_tmess_prng_rosc3,
> +       msm_mux_tod_pps_in,
> +       msm_mux_tsense_pwm1_out,
> +       msm_mux_tsense_pwm2_out,
> +       msm_mux_usb2phy_ac_en,
> +       msm_mux_usb_con_det,
> +       msm_mux_usb_dfp_en,
> +       msm_mux_usb_phy_ps,
> +       msm_mux_vfr_0,
> +       msm_mux_vfr_1,
> +       msm_mux_vsense_trigger_mirnat,
> +       msm_mux__,
> +};

[skipped]
Melody Olvera Oct. 4, 2022, 7:59 p.m. UTC | #2 
On 10/1/2022 2:47 AM, Dmitry Baryshkov wrote:
> On Sat, 1 Oct 2022 at 06:07, Melody Olvera <quic_molvera@quicinc.com> wrote:
>> Add pin control driver for the TLMM block found in the QDU1000
>> and QRU1000 SoC.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  .../pinctrl/qcom,qdru1000-pinctrl.yaml        |  177 +-
>>  drivers/pinctrl/qcom/Kconfig                  |   10 +
>>  drivers/pinctrl/qcom/Makefile                 |    1 +
>>  drivers/pinctrl/qcom/pinctrl-qdru1000.c       |   59 +
>>  drivers/pinctrl/qcom/pinctrl-qdru1000.h       | 1896 +++++++++++++++++
>>  5 files changed, 2050 insertions(+), 93 deletions(-)
>>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.c
>>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.h
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>> index e8d938303231..42176247862c 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> This should go to the bindings patch, shan't it ?
Yup; my mistake. Next PS will have this separate.
>
>> @@ -10,7 +10,11 @@ maintainers:
> [skipped]
>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index f415c13caae0..c8a7d6e44a81 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -390,6 +390,16 @@ config PINCTRL_SM8450
>>           Qualcomm Technologies Inc TLMM block found on the Qualcomm
>>           Technologies Inc SM8450 platform.
>>
>> +config PINCTRL_QDRU1000
>> +       tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
>> +       depends on GPIOLIB && OF
>> +       depends on PINCTRL_MSM
>> +       help
>> +         This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
>> +         Qualcomm Technologies Inc TLMM block found on the Qualcomm
>> +         Technologies Inc QDU1000 and QRU1000 platforms.
>> +
>> +
>>  config PINCTRL_LPASS_LPI
>>         tristate "Qualcomm Technologies Inc LPASS LPI pin controller driver"
>>         select PINMUX
>> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
>> index fbd64853a24d..431a845b4e2d 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -45,4 +45,5 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>>  obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
>>  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>>  obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
>> +obj-$(CONFIG_PINCTRL_QDRU1000) += pinctrl-qdru1000.o
> Please move it before sc7180
Will do.
>
>>  obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
>> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
>> new file mode 100644
>> index 000000000000..8b931ff80bb4
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
>> @@ -0,0 +1,59 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/pinctrl.h>
>> +
>> +#include "pinctrl-msm.h"
>> +#include "pinctrl-qdru1000.h"
> No need to split all defs to a header file. Please merge them here.
Will do.
>
>> +
>> +static const struct msm_pinctrl_soc_data qdru1000_tlmm = {
>> +       .pins = qdru1000_pins,
>> +       .npins = ARRAY_SIZE(qdru1000_pins),
>> +       .functions = qdru1000_functions,
>> +       .nfunctions = ARRAY_SIZE(qdru1000_functions),
>> +       .groups = qdru1000_groups,
>> +       .ngroups = ARRAY_SIZE(qdru1000_groups),
>> +       .ngpios = 151,
>> +};
>> +
>> +static int qdru1000_tlmm_probe(struct platform_device *pdev)
>> +{
>> +       return msm_pinctrl_probe(pdev, &qdru1000_tlmm);
>> +}
>> +
>> +static const struct of_device_id qdru1000_tlmm_of_match[] = {
>> +       { .compatible = "qcom,qdu1000-tlmm", },
>> +       { .compatible = "qcom,qru1000-tlmm", },
>> +       { },
>> +};
>> +
>> +static struct platform_driver qdru1000_tlmm_driver = {
>> +       .driver = {
>> +               .name = "qdru1000-tlmm",
>> +               .of_match_table = qdru1000_tlmm_of_match,
>> +       },
>> +       .probe = qdru1000_tlmm_probe,
>> +       .remove = msm_pinctrl_remove,
>> +};
>> +
>> +static int __init qdru1000_tlmm_init(void)
>> +{
>> +       return platform_driver_register(&qdru1000_tlmm_driver);
>> +}
>> +arch_initcall(qdru1000_tlmm_init);
>> +
>> +static void __exit qdru1000_tlmm_exit(void)
>> +{
>> +       platform_driver_unregister(&qdru1000_tlmm_driver);
>> +}
>> +module_exit(qdru1000_tlmm_exit);
>> +
>> +MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match);
>> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
>> new file mode 100644
>> index 000000000000..3c1f703ae53b
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
>> @@ -0,0 +1,1896 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#define FUNCTION(fname)                                        \
>> +       [msm_mux_##fname] = {                           \
>> +               .name = #fname,                         \
>> +               .groups = fname##_groups,               \
>> +               .ngroups = ARRAY_SIZE(fname##_groups),  \
>> +       }
>> +
> [skipped]
>
>> +
>> +static const unsigned int sdc1_rclk_pins[] = { 151 };
>> +static const unsigned int sdc1_clk_pins[] = { 152 };
>> +static const unsigned int sdc1_cmd_pins[] = { 153 };
>> +static const unsigned int sdc1_data_pins[] = { 154 };
>> +
>> +enum qdru1000_functions {
>> +       msm_mux_gpio,
>> +       msm_mux_CMO_PRI,
>> +       msm_mux_SI5518_INT,
> Ugh. Is there really a function for the Si5518 interrupt? And what is CMO_PRI?
Yeah we need the Si5518 for userspace processes. Admittedly I'm not sure what uses CMO_PRI; can probably remove it.
>> +       msm_mux_atest_char_start,
>> +       msm_mux_atest_char_status0,
>> +       msm_mux_atest_char_status1,
>> +       msm_mux_atest_char_status2,
>> +       msm_mux_atest_char_status3,
>> +       msm_mux_atest_usb0_atereset,
>> +       msm_mux_atest_usb0_testdataout00,
>> +       msm_mux_atest_usb0_testdataout01,
>> +       msm_mux_atest_usb0_testdataout02,
>> +       msm_mux_atest_usb0_testdataout03,
>> +       msm_mux_char_exec_pending,
>> +       msm_mux_char_exec_release,
>> +       msm_mux_cmu_rng_entropy0,
>> +       msm_mux_cmu_rng_entropy1,
>> +       msm_mux_cmu_rng_entropy2,
>> +       msm_mux_cmu_rng_entropy3,
>> +       msm_mux_dbg_out_clk,
>> +       msm_mux_ddr_bist_complete,
>> +       msm_mux_ddr_bist_fail,
>> +       msm_mux_ddr_bist_start,
>> +       msm_mux_ddr_bist_stop,
>> +       msm_mux_ddr_pxi0_test,
>> +       msm_mux_ddr_pxi1_test,
>> +       msm_mux_ddr_pxi2_test,
>> +       msm_mux_ddr_pxi3_test,
>> +       msm_mux_ddr_pxi4_test,
>> +       msm_mux_ddr_pxi5_test,
>> +       msm_mux_ddr_pxi6_test,
>> +       msm_mux_ddr_pxi7_test,
>> +       msm_mux_eth012_int_n,
>> +       msm_mux_eth345_int_n,
>> +       msm_mux_eth6_int_n,
>> +       msm_mux_gcc_gp1_clk,
>> +       msm_mux_gcc_gp2_clk,
>> +       msm_mux_gcc_gp3_clk,
>> +       msm_mux_gps_pps_in,
>> +       msm_mux_hardsync_pps_in,
>> +       msm_mux_intr_c_raw0,
>> +       msm_mux_intr_c_raw1,
>> +       msm_mux_intr_c_raw2,
>> +       msm_mux_jitter_bist_ref,
>> +       msm_mux_pcie0,
>> +       msm_mux_pcie0_clkreqn,
>> +       msm_mux_pcie0_wake,
>> +       msm_mux_phase_flag_status0,
>> +       msm_mux_phase_flag_status1,
>> +       msm_mux_phase_flag_status10,
>> +       msm_mux_phase_flag_status11,
>> +       msm_mux_phase_flag_status12,
>> +       msm_mux_phase_flag_status13,
>> +       msm_mux_phase_flag_status14,
>> +       msm_mux_phase_flag_status15,
>> +       msm_mux_phase_flag_status16,
>> +       msm_mux_phase_flag_status17,
>> +       msm_mux_phase_flag_status18,
>> +       msm_mux_phase_flag_status19,
>> +       msm_mux_phase_flag_status2,
>> +       msm_mux_phase_flag_status20,
>> +       msm_mux_phase_flag_status21,
>> +       msm_mux_phase_flag_status22,
>> +       msm_mux_phase_flag_status23,
>> +       msm_mux_phase_flag_status24,
>> +       msm_mux_phase_flag_status25,
>> +       msm_mux_phase_flag_status26,
>> +       msm_mux_phase_flag_status27,
>> +       msm_mux_phase_flag_status28,
>> +       msm_mux_phase_flag_status29,
>> +       msm_mux_phase_flag_status3,
>> +       msm_mux_phase_flag_status30,
>> +       msm_mux_phase_flag_status31,
>> +       msm_mux_phase_flag_status4,
>> +       msm_mux_phase_flag_status5,
>> +       msm_mux_phase_flag_status6,
>> +       msm_mux_phase_flag_status7,
>> +       msm_mux_phase_flag_status8,
>> +       msm_mux_phase_flag_status9,
>> +       msm_mux_pll_bist_sync,
>> +       msm_mux_pll_clk_aux,
>> +       msm_mux_prng_rosc_test0,
>> +       msm_mux_prng_rosc_test1,
>> +       msm_mux_prng_rosc_test2,
>> +       msm_mux_prng_rosc_test3,
>> +       msm_mux_qdss_cti_trig0,
>> +       msm_mux_qdss_cti_trig1,
>> +       msm_mux_qdss_cti_trig2,
>> +       msm_mux_qdss_cti_trig3,
>> +       msm_mux_qdss_cti_trig4,
>> +       msm_mux_qdss_gpio_traceclk,
>> +       msm_mux_qdss_gpio_tracectl,
>> +       msm_mux_qdss_gpio_tracedata0,
>> +       msm_mux_qdss_gpio_tracedata1,
>> +       msm_mux_qdss_gpio_tracedata10,
>> +       msm_mux_qdss_gpio_tracedata11,
>> +       msm_mux_qdss_gpio_tracedata12,
>> +       msm_mux_qdss_gpio_tracedata13,
>> +       msm_mux_qdss_gpio_tracedata14,
>> +       msm_mux_qdss_gpio_tracedata15,
>> +       msm_mux_qdss_gpio_tracedata2,
>> +       msm_mux_qdss_gpio_tracedata3,
>> +       msm_mux_qdss_gpio_tracedata4,
>> +       msm_mux_qdss_gpio_tracedata5,
>> +       msm_mux_qdss_gpio_tracedata6,
>> +       msm_mux_qdss_gpio_tracedata7,
>> +       msm_mux_qdss_gpio_tracedata8,
>> +       msm_mux_qdss_gpio_tracedata9,
>> +       msm_mux_qlink0_enable,
>> +       msm_mux_qlink0_request,
>> +       msm_mux_qlink0_wmss_reset,
>> +       msm_mux_qlink1_enable,
>> +       msm_mux_qlink1_request,
>> +       msm_mux_qlink1_wmss_reset,
>> +       msm_mux_qlink2_enable,
>> +       msm_mux_qlink2_request,
>> +       msm_mux_qlink2_wmss_reset,
>> +       msm_mux_qlink3_enable,
>> +       msm_mux_qlink3_request,
>> +       msm_mux_qlink3_wmss_reset,
>> +       msm_mux_qlink4_enable,
>> +       msm_mux_qlink4_request,
>> +       msm_mux_qlink4_wmss_reset,
>> +       msm_mux_qlink5_enable,
>> +       msm_mux_qlink5_request,
>> +       msm_mux_qlink5_wmss_reset,
>> +       msm_mux_qlink6_enable,
>> +       msm_mux_qlink6_request,
>> +       msm_mux_qlink6_wmss_reset,
>> +       msm_mux_qlink7_enable,
>> +       msm_mux_qlink7_request,
>> +       msm_mux_qlink7_wmss_reset,
>> +       msm_mux_qspi_clk,
>> +       msm_mux_qspi_cs_n,
>> +       msm_mux_qspi_data_0,
>> +       msm_mux_qspi_data_1,
>> +       msm_mux_qspi_data_2,
>> +       msm_mux_qspi_data_3,
>> +       msm_mux_qup0_se0_l0,
>> +       msm_mux_qup0_se0_l1,
>> +       msm_mux_qup0_se0_l2,
>> +       msm_mux_qup0_se0_l3,
>> +       msm_mux_qup0_se1_l0,
>> +       msm_mux_qup0_se1_l1,
>> +       msm_mux_qup0_se1_l2,
>> +       msm_mux_qup0_se1_l3,
>> +       msm_mux_qup0_se2_l0,
>> +       msm_mux_qup0_se2_l1,
>> +       msm_mux_qup0_se2_l2,
>> +       msm_mux_qup0_se2_l3,
>> +       msm_mux_qup0_se3_l0,
>> +       msm_mux_qup0_se3_l1,
>> +       msm_mux_qup0_se3_l2,
>> +       msm_mux_qup0_se3_l3,
>> +       msm_mux_qup0_se4_l0,
>> +       msm_mux_qup0_se4_l1,
>> +       msm_mux_qup0_se4_l2,
>> +       msm_mux_qup0_se4_l3,
>> +       msm_mux_qup0_se5_l0,
>> +       msm_mux_qup0_se5_l1,
>> +       msm_mux_qup0_se5_l2,
>> +       msm_mux_qup0_se5_l3,
>> +       msm_mux_qup0_se6_l0,
>> +       msm_mux_qup0_se6_l1,
>> +       msm_mux_qup0_se6_l2,
>> +       msm_mux_qup0_se6_l3,
>> +       msm_mux_qup0_se7_l0,
>> +       msm_mux_qup0_se7_l1,
>> +       msm_mux_qup0_se7_l2,
>> +       msm_mux_qup0_se7_l3,
>> +       msm_mux_qup1_se0_l0,
>> +       msm_mux_qup1_se0_l1,
>> +       msm_mux_qup1_se0_l2,
>> +       msm_mux_qup1_se0_l3,
>> +       msm_mux_qup1_se1_l0,
>> +       msm_mux_qup1_se1_l1,
>> +       msm_mux_qup1_se1_l2,
>> +       msm_mux_qup1_se1_l3,
>> +       msm_mux_qup1_se2_l0,
>> +       msm_mux_qup1_se2_l1,
>> +       msm_mux_qup1_se2_l2,
>> +       msm_mux_qup1_se2_l3,
>> +       msm_mux_qup1_se3_l0,
>> +       msm_mux_qup1_se3_l1,
>> +       msm_mux_qup1_se3_l2,
>> +       msm_mux_qup1_se3_l3,
>> +       msm_mux_qup1_se4_l0,
>> +       msm_mux_qup1_se4_l1,
>> +       msm_mux_qup1_se4_l2,
>> +       msm_mux_qup1_se4_l3,
>> +       msm_mux_qup1_se5_l0,
>> +       msm_mux_qup1_se5_l1,
>> +       msm_mux_qup1_se5_l2,
>> +       msm_mux_qup1_se5_l3,
>> +       msm_mux_qup1_se6_l0,
>> +       msm_mux_qup1_se6_l1,
>> +       msm_mux_qup1_se6_l2,
>> +       msm_mux_qup1_se6_l3,
>> +       msm_mux_qup1_se6_l4,
>> +       msm_mux_qup1_se6_l5,
>> +       msm_mux_qup1_se6_l6,
>> +       msm_mux_qup1_se7_l0,
>> +       msm_mux_qup1_se7_l1,
>> +       msm_mux_qup1_se7_l2,
>> +       msm_mux_qup1_se7_l3,
>> +       msm_mux_qup1_se7_l4,
>> +       msm_mux_qup1_se7_l5,
>> +       msm_mux_qup1_se7_l6,
>> +       msm_mux_qup2_se0_l0,
>> +       msm_mux_qup2_se0_l1,
>> +       msm_mux_qup2_se0_l2,
>> +       msm_mux_qup2_se0_l3,
>> +       msm_mux_qup2_se1_l0,
>> +       msm_mux_qup2_se1_l1,
>> +       msm_mux_qup2_se1_l2,
>> +       msm_mux_qup2_se1_l3,
>> +       msm_mux_qup2_se2_l0,
>> +       msm_mux_qup2_se2_l1,
>> +       msm_mux_qup2_se2_l2,
>> +       msm_mux_qup2_se2_l3,
> We usually use the 'qupN' naming here.
>
> Overall comment to the function definitions. You seem to be splitting
> them too much. Please consider how other pinctrl drivers handle the
> functions. There is no need to define a function per each pin. Group
> them logically for all the pins belonging to a specific logical
> function/device.
Will do.
>
>> +       msm_mux_smb_alert,
>> +       msm_mux_smb_alert_n,
>> +       msm_mux_smb_clk,
>> +       msm_mux_smb_dat,
>> +       msm_mux_tb_trig_sdc1,
>> +       msm_mux_tgu_ch0_trigout,
>> +       msm_mux_tgu_ch1_trigout,
>> +       msm_mux_tgu_ch2_trigout,
>> +       msm_mux_tgu_ch3_trigout,
>> +       msm_mux_tgu_ch4_trigout,
>> +       msm_mux_tgu_ch5_trigout,
>> +       msm_mux_tgu_ch6_trigout,
>> +       msm_mux_tgu_ch7_trigout,
>> +       msm_mux_tmess_prng_rosc0,
>> +       msm_mux_tmess_prng_rosc1,
>> +       msm_mux_tmess_prng_rosc2,
>> +       msm_mux_tmess_prng_rosc3,
>> +       msm_mux_tod_pps_in,
>> +       msm_mux_tsense_pwm1_out,
>> +       msm_mux_tsense_pwm2_out,
>> +       msm_mux_usb2phy_ac_en,
>> +       msm_mux_usb_con_det,
>> +       msm_mux_usb_dfp_en,
>> +       msm_mux_usb_phy_ps,
>> +       msm_mux_vfr_0,
>> +       msm_mux_vfr_1,
>> +       msm_mux_vsense_trigger_mirnat,
>> +       msm_mux__,
>> +};
> [skipped]
>
Thanks,
Melody
Melody Olvera Oct. 4, 2022, 8 p.m. UTC | #3 
On 10/1/2022 4:22 AM, Krzysztof Kozlowski wrote:
> On 01/10/2022 05:05, Melody Olvera wrote:
>> Add pin control driver for the TLMM block found in the QDU1000
>> and QRU1000 SoC.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>  .../pinctrl/qcom,qdru1000-pinctrl.yaml        |  177 +-
>>  drivers/pinctrl/qcom/Kconfig                  |   10 +
>>  drivers/pinctrl/qcom/Makefile                 |    1 +
>>  drivers/pinctrl/qcom/pinctrl-qdru1000.c       |   59 +
>>  drivers/pinctrl/qcom/pinctrl-qdru1000.h       | 1896 +++++++++++++++++
>>  5 files changed, 2050 insertions(+), 93 deletions(-)
>>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.c
>>  create mode 100644 drivers/pinctrl/qcom/pinctrl-qdru1000.h
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>> index e8d938303231..42176247862c 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
> Nope, drivers cannot be mixed with bindings in one patch.
Ack.
>
>> @@ -10,7 +10,11 @@ maintainers:
>>    - Melody Olvera <quic_molvera@quicinc.com>
>>  
>>  description: |
>> -  This binding describes the Top Level Mode Multiplexer block.
>> +  This binding describes the Top Level Mode Multiplexer block (TLMM) found
>> +  in the QDU1000 and QRU1000 platforms.
>> +
>> +allOf:
>> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>>  
>>  properties:
>>    compatible:
>> @@ -19,105 +23,92 @@ properties:
>>        - const: qcom,qru1000-tlmm
>>  
>>    reg:
>> -    items:
>> -      - description: Base address of TLMM register space
>> -      - description: Size of TLMM register space
>> -
>> -  interrupts:
>> -    minItems: 0
>>      maxItems: 1
>> -    items:
>> -      - const: TLMM summary IRQ
>> -
>> +  interrupts: true
>>    interrupt-controller: true
>> -
>> -  '#interrupt-cells':
>> -    const: 2
>> -
>> +  '#interrupt-cells': true
>>    gpio-controller: true
>> +  '#gpio-cells': true
>> +  wakeup-parent: true
>>  
>> -  '#gpio-cells':
>> -    const: 2
>> -
>> -  wakeup-parent:
>> -    maxItems: 1
>> -    description:
>> -      Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
>> -      a general description of GPIO and interrupt bindings.
>> -
>> -      Please refer to pinctrl-bindings.txt in this directory for details of the
>> -      common pinctrl bindings used by client devices, including the meaning of the
>> -      phrase "pin configuration node".
>> -
>> -      The pin configuration nodes act as a container for an arbitrary number of
>> -      subnodes. Each of these subnodes represents some desired configuration for a
>> -      pin, a group, or a list of pins or groups. This configuration can include the
>> -      mux function to select on those pin(s)/group(s), and various pin configuration
>> -      parameters, such as pull-up, drive strength, etc.
>> +required:
>> +  - compatible
>> +  - reg
>>  
>> +additionalProperties: false
>>  
>>  # PIN CONFIGURATION NODES
>> -patternPropetries:
>> -  '^.*$':
>> -    if:
>> -      type: object
>> -    then:
>> -      properties:
>> -        pins:
>> -          description:
>> -            List of gpio pins affected by the properties specified in
>> -            this subnode.
>> -          items:
>> -            oneOf:
>> -              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
>> -              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
>> -            minItems: 1
>> -            maxItems: 36
>> -        function:
>> -          description:
>> -            Specify the alternative function to be configured for the
>> -            specified pins. Functions are only valid for gpio pins.
>> -          enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
>> -            atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
>> -            cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
>> -            cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
>> -            cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
>> -            gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
>> -            mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
>> -            mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
>> -            mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
>> -            nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
>> -            phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
>> -            phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
>> -            phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
>> -            phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
>> -            phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
>> -            pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
>> -            qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
>> -            qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
>> -            qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
>> -            qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
>> -            qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
>> -            qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
>> -            qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
>> -            sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
>> -            tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
>> -            uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
>> -            vfr_1, vsense_trigger]
>> -        drive-strength:
>> -          enum: [2, 4, 6, 8, 10, 12, 14, 16]
>> -          default: 2
>> -          description:
>> -            Selects the drive strength for the specified pins, in mA.
>> -        bias-pull-down: true
>> -        bias-pull-up: true
>> -        bias-disable: true
>> -        output-high: true
>> -        output-low: true
>> -      required:
>> -        - pins
>> -        - function
>> -      additionalProperties: false
>> +patternProperties:
>> +  '-state$':
>> +    oneOf:
>> +      - $ref: "#/$defs/qcom-qdru1000-tlmm-state"
>> +      - patternProperties:
>> +          ".*":
>> +            $ref: "#/$defs/qcom-qdru1000-tlmm-state"
> Review your patches before sending...
>
>> +
>> +$defs:
>> +  qcom-qdru1000-tlmm-state:
>> +    type: object
>> +    description:
>> +      Pinctrl nodes' client devices use subnodes for desired pin configuration.
>> +      Client device subnodes use below standard properties.
>> +    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
>> +    properties:
>> +      pins:
>> +        description:
>> +          List of gpio pins affected by the properties specified in
>> +          this subnode.
>> +        items:
>> +          oneOf:
>> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
>> +            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
>> +        minItems: 1
>> +        maxItems: 36
>> +      function:
>> +        description:
>> +          Specify the alternative function to be configured for the
>> +          specified pins. Functions are only valid for gpio pins.
>> +        enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
>> +          atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
>> +          cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
>> +          cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
>> +          cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
>> +          gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
>> +          mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
>> +          mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
>> +          mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
>> +          nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
>> +          phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
>> +          phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
>> +          phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
>> +          phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
>> +          phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
>> +          pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
>> +          qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
>> +          qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
>> +          qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
>> +          qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
>> +          qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
>> +          qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
>> +          qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
>> +          sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
>> +          tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
>> +          uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
>> +          vfr_1, vsense_trigger]
>> +
>> +      bias-disable: true
>> +      bias-pull-down: true
>> +      bias-pull-up: true
>> +      drive-strength: true
>> +      input-enable: true
>> +      output-high: true
>> +      output-low: true
>> +
>> +    required:
>> +      - pins
>> +      - function
>> +
>> +    additionalProperties: false
>>  
>>  examples:
>>    - |
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index f415c13caae0..c8a7d6e44a81 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -390,6 +390,16 @@ config PINCTRL_SM8450
>>  	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
>>  	  Technologies Inc SM8450 platform.
>>  
>> +config PINCTRL_QDRU1000
> Order alphabetically.
>
>> +	tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
>> +	depends on GPIOLIB && OF
>> +	depends on PINCTRL_MSM
>> +	help
>> +	  This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
>> +	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
>> +	  Technologies Inc QDU1000 and QRU1000 platforms.
>> +
>> +
> No need for multiple line breaks.
>
>>  config PINCTRL_LPASS_LPI
>>  	tristate "Qualcomm Technologies Inc LPASS LPI pin controller driver"
>>  	select PINMUX
>> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
>> index fbd64853a24d..431a845b4e2d 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -45,4 +45,5 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>>  obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
>>  obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>>  obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
>> +obj-$(CONFIG_PINCTRL_QDRU1000) += pinctrl-qdru1000.o
> Wrong order.
Will fix.
>
>>  obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
>> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
>> new file mode 100644
>> index 000000000000..8b931ff80bb4
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
>> @@ -0,0 +1,59 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/pinctrl.h>
>> +
>> +#include "pinctrl-msm.h"
>> +#include "pinctrl-qdru1000.h"
>> +
>> +static const struct msm_pinctrl_soc_data qdru1000_tlmm = {
>> +	.pins = qdru1000_pins,
>> +	.npins = ARRAY_SIZE(qdru1000_pins),
>> +	.functions = qdru1000_functions,
>> +	.nfunctions = ARRAY_SIZE(qdru1000_functions),
>> +	.groups = qdru1000_groups,
>> +	.ngroups = ARRAY_SIZE(qdru1000_groups),
>> +	.ngpios = 151,
>> +};
>> +
>> +static int qdru1000_tlmm_probe(struct platform_device *pdev)
>> +{
>> +	return msm_pinctrl_probe(pdev, &qdru1000_tlmm);
>> +}
>> +
>> +static const struct of_device_id qdru1000_tlmm_of_match[] = {
>> +	{ .compatible = "qcom,qdu1000-tlmm", },
>> +	{ .compatible = "qcom,qru1000-tlmm", },
>> +	{ },
>> +};
>> +
>> +static struct platform_driver qdru1000_tlmm_driver = {
>> +	.driver = {
>> +		.name = "qdru1000-tlmm",
>> +		.of_match_table = qdru1000_tlmm_of_match,
>> +	},
>> +	.probe = qdru1000_tlmm_probe,
>> +	.remove = msm_pinctrl_remove,
>> +};
>> +
>> +static int __init qdru1000_tlmm_init(void)
>> +{
>> +	return platform_driver_register(&qdru1000_tlmm_driver);
>> +}
>> +arch_initcall(qdru1000_tlmm_init);
>> +
>> +static void __exit qdru1000_tlmm_exit(void)
>> +{
>> +	platform_driver_unregister(&qdru1000_tlmm_driver);
>> +}
>> +module_exit(qdru1000_tlmm_exit);
>> +
>> +MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match);
>> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
>> new file mode 100644
>> index 000000000000..3c1f703ae53b
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
>> @@ -0,0 +1,1896 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#define FUNCTION(fname)			                \
>> +	[msm_mux_##fname] = {		                \
>> +		.name = #fname,				\
>> +		.groups = fname##_groups,               \
>> +		.ngroups = ARRAY_SIZE(fname##_groups),	\
>> +	}
>> +
>> +#define REG_BASE 0x100000
>> +#define REG_SIZE 0x1000
>> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
>> +	{					        \
>> +		.name = "gpio" #id,			\
>> +		.pins = gpio##id##_pins,		\
>> +		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
>> +		.funcs = (int[]){			\
>> +			msm_mux_gpio, /* gpio mode */	\
>> +			msm_mux_##f1,			\
>> +			msm_mux_##f2,			\
>> +			msm_mux_##f3,			\
>> +			msm_mux_##f4,			\
>> +			msm_mux_##f5,			\
>> +			msm_mux_##f6,			\
>> +			msm_mux_##f7,			\
>> +			msm_mux_##f8,			\
>> +			msm_mux_##f9			\
>> +		},				        \
>> +		.nfuncs = 10,				\
>> +		.ctl_reg = REG_BASE + REG_SIZE * id,			\
>> +		.io_reg = REG_BASE + 0x4 + REG_SIZE * id,		\
>> +		.intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id,		\
>> +		.intr_status_reg = REG_BASE + 0xc + REG_SIZE * id,	\
>> +		.intr_target_reg = REG_BASE + 0x8 + REG_SIZE * id,	\
>> +		.mux_bit = 2,			\
>> +		.pull_bit = 0,			\
>> +		.drv_bit = 6,			\
>> +		.oe_bit = 9,			\
>> +		.in_bit = 0,			\
>> +		.out_bit = 1,			\
>> +		.intr_enable_bit = 0,		\
>> +		.intr_status_bit = 0,		\
>> +		.intr_target_bit = 5,		\
>> +		.intr_target_kpss_val = 3,	\
>> +		.intr_raw_status_bit = 4,	\
>> +		.intr_polarity_bit = 1,		\
>> +		.intr_detection_bit = 2,	\
>> +		.intr_detection_width = 2,	\
>> +	}
>> +
>> +#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
>> +	{					        \
>> +		.name = #pg_name,			\
>> +		.pins = pg_name##_pins,			\
>> +		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
>> +		.ctl_reg = REG_BASE + ctl,				\
>> +		.io_reg = 0,				\
>> +		.intr_cfg_reg = 0,			\
>> +		.intr_status_reg = 0,			\
>> +		.intr_target_reg = 0,			\
>> +		.mux_bit = -1,				\
>> +		.pull_bit = pull,			\
>> +		.drv_bit = drv,				\
>> +		.oe_bit = -1,				\
>> +		.in_bit = -1,				\
>> +		.out_bit = -1,				\
>> +		.intr_enable_bit = -1,			\
>> +		.intr_status_bit = -1,			\
>> +		.intr_target_bit = -1,			\
>> +		.intr_raw_status_bit = -1,		\
>> +		.intr_polarity_bit = -1,		\
>> +		.intr_detection_bit = -1,		\
>> +		.intr_detection_width = -1,		\
>> +	}
>> +
>> +#define UFS_RESET(pg_name, offset)				\
>> +	{					        \
>> +		.name = #pg_name,			\
>> +		.pins = pg_name##_pins,			\
>> +		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
>> +		.ctl_reg = offset,			\
>> +		.io_reg = offset + 0x4,			\
>> +		.intr_cfg_reg = 0,			\
>> +		.intr_status_reg = 0,			\
>> +		.intr_target_reg = 0,			\
>> +		.mux_bit = -1,				\
>> +		.pull_bit = 3,				\
>> +		.drv_bit = 0,				\
>> +		.oe_bit = -1,				\
>> +		.in_bit = -1,				\
>> +		.out_bit = 0,				\
>> +		.intr_enable_bit = -1,			\
>> +		.intr_status_bit = -1,			\
>> +		.intr_target_bit = -1,			\
>> +		.intr_raw_status_bit = -1,		\
>> +		.intr_polarity_bit = -1,		\
>> +		.intr_detection_bit = -1,		\
>> +		.intr_detection_width = -1,		\
>> +	}
>> +
>> +#define QUP_I3C(qup_mode, qup_offset)			\
>> +	{						\
>> +		.mode = qup_mode,			\
>> +		.offset = qup_offset,			\
>> +	}
>> +
>> +static const struct pinctrl_pin_desc qdru1000_pins[] = {
>> +	PINCTRL_PIN(0, "GPIO_0"),
>> +	PINCTRL_PIN(1, "GPIO_1"),
>> +	PINCTRL_PIN(2, "GPIO_2"),
>> +	PINCTRL_PIN(3, "GPIO_3"),
> Nope. Header is not a place for this stuff.
Will merge into driver file.
>
> Best regards,
> Krzysztof
>
Thanks,
Melody
Bjorn Andersson Oct. 6, 2022, 1:50 a.m. UTC | #4 
On Fri, Sep 30, 2022 at 08:05:46PM -0700, Melody Olvera wrote:
[..]
> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
> new file mode 100644
> index 000000000000..8b931ff80bb4
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
> @@ -0,0 +1,59 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#include "pinctrl-msm.h"
> +#include "pinctrl-qdru1000.h"
> +
> +static const struct msm_pinctrl_soc_data qdru1000_tlmm = {
> +	.pins = qdru1000_pins,
> +	.npins = ARRAY_SIZE(qdru1000_pins),
> +	.functions = qdru1000_functions,
> +	.nfunctions = ARRAY_SIZE(qdru1000_functions),
> +	.groups = qdru1000_groups,
> +	.ngroups = ARRAY_SIZE(qdru1000_groups),
> +	.ngpios = 151,
> +};
> +
> +static int qdru1000_tlmm_probe(struct platform_device *pdev)
> +{
> +	return msm_pinctrl_probe(pdev, &qdru1000_tlmm);
> +}
> +
> +static const struct of_device_id qdru1000_tlmm_of_match[] = {
> +	{ .compatible = "qcom,qdu1000-tlmm", },
> +	{ .compatible = "qcom,qru1000-tlmm", },
> +	{ },
> +};
> +
> +static struct platform_driver qdru1000_tlmm_driver = {
> +	.driver = {
> +		.name = "qdru1000-tlmm",
> +		.of_match_table = qdru1000_tlmm_of_match,
> +	},
> +	.probe = qdru1000_tlmm_probe,
> +	.remove = msm_pinctrl_remove,
> +};
> +
> +static int __init qdru1000_tlmm_init(void)
> +{
> +	return platform_driver_register(&qdru1000_tlmm_driver);
> +}
> +arch_initcall(qdru1000_tlmm_init);
> +
> +static void __exit qdru1000_tlmm_exit(void)
> +{
> +	platform_driver_unregister(&qdru1000_tlmm_driver);
> +}
> +module_exit(qdru1000_tlmm_exit);
> +
> +MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver");
> +MODULE_LICENSE("GPL v2");

"GPL" only please.

> +MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match);

Please add this next to qdru1000_tlmm_of_match.

> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h

I'm not able to see why this is in a header file and the commit message
doesn't give a clue. Please align with the customary form, or motivate
your choice.

[..]
> +
> +enum qdru1000_functions {
> +	msm_mux_gpio,
> +	msm_mux_CMO_PRI,
> +	msm_mux_SI5518_INT,
> +	msm_mux_atest_char_start,
> +	msm_mux_atest_char_status0,
> +	msm_mux_atest_char_status1,
> +	msm_mux_atest_char_status2,
> +	msm_mux_atest_char_status3,

For anything that denotes different pins in one function, please drop
the suffix and make this a list of functions.

[..]
> +	msm_mux_qspi_data_0,
> +	msm_mux_qspi_data_1,
> +	msm_mux_qspi_data_2,
> +	msm_mux_qspi_data_3,
> +	msm_mux_qup0_se0_l0,

E.g. msm_mux_qup0_se0 is enough, giving each pin its own function means
that we need to define each pin separate in DT.

Regards,
Bjorn
Melody Olvera Oct. 12, 2022, 6:54 p.m. UTC | #5 
On 10/5/2022 6:50 PM, Bjorn Andersson wrote:
> On Fri, Sep 30, 2022 at 08:05:46PM -0700, Melody Olvera wrote:
> [..]
>> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
>> new file mode 100644
>> index 000000000000..8b931ff80bb4
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
>> @@ -0,0 +1,59 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pinctrl/pinctrl.h>
>> +
>> +#include "pinctrl-msm.h"
>> +#include "pinctrl-qdru1000.h"
>> +
>> +static const struct msm_pinctrl_soc_data qdru1000_tlmm = {
>> +	.pins = qdru1000_pins,
>> +	.npins = ARRAY_SIZE(qdru1000_pins),
>> +	.functions = qdru1000_functions,
>> +	.nfunctions = ARRAY_SIZE(qdru1000_functions),
>> +	.groups = qdru1000_groups,
>> +	.ngroups = ARRAY_SIZE(qdru1000_groups),
>> +	.ngpios = 151,
>> +};
>> +
>> +static int qdru1000_tlmm_probe(struct platform_device *pdev)
>> +{
>> +	return msm_pinctrl_probe(pdev, &qdru1000_tlmm);
>> +}
>> +
>> +static const struct of_device_id qdru1000_tlmm_of_match[] = {
>> +	{ .compatible = "qcom,qdu1000-tlmm", },
>> +	{ .compatible = "qcom,qru1000-tlmm", },
>> +	{ },
>> +};
>> +
>> +static struct platform_driver qdru1000_tlmm_driver = {
>> +	.driver = {
>> +		.name = "qdru1000-tlmm",
>> +		.of_match_table = qdru1000_tlmm_of_match,
>> +	},
>> +	.probe = qdru1000_tlmm_probe,
>> +	.remove = msm_pinctrl_remove,
>> +};
>> +
>> +static int __init qdru1000_tlmm_init(void)
>> +{
>> +	return platform_driver_register(&qdru1000_tlmm_driver);
>> +}
>> +arch_initcall(qdru1000_tlmm_init);
>> +
>> +static void __exit qdru1000_tlmm_exit(void)
>> +{
>> +	platform_driver_unregister(&qdru1000_tlmm_driver);
>> +}
>> +module_exit(qdru1000_tlmm_exit);
>> +
>> +MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver");
>> +MODULE_LICENSE("GPL v2");
> "GPL" only please.
Ack.
>
>> +MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match);
> Please add this next to qdru1000_tlmm_of_match.
Ack.
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
> I'm not able to see why this is in a header file and the commit message
> doesn't give a clue. Please align with the customary form, or motivate
> your choice.
Will use customary form instead of header file.
>
> [..]
>> +
>> +enum qdru1000_functions {
>> +	msm_mux_gpio,
>> +	msm_mux_CMO_PRI,
>> +	msm_mux_SI5518_INT,
>> +	msm_mux_atest_char_start,
>> +	msm_mux_atest_char_status0,
>> +	msm_mux_atest_char_status1,
>> +	msm_mux_atest_char_status2,
>> +	msm_mux_atest_char_status3,
> For anything that denotes different pins in one function, please drop
> the suffix and make this a list of functions.
Got it.
>
> [..]
>> +	msm_mux_qspi_data_0,
>> +	msm_mux_qspi_data_1,
>> +	msm_mux_qspi_data_2,
>> +	msm_mux_qspi_data_3,
>> +	msm_mux_qup0_se0_l0,
> E.g. msm_mux_qup0_se0 is enough, giving each pin its own function means
> that we need to define each pin separate in DT.
Going to switch to qupN format per another thread.
> Regards,
> Bjorn
Thanks,
Melody
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
index e8d938303231..42176247862c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdru1000-pinctrl.yaml
@@ -10,7 +10,11 @@  maintainers:
   - Melody Olvera <quic_molvera@quicinc.com>
 
 description: |
-  This binding describes the Top Level Mode Multiplexer block.
+  This binding describes the Top Level Mode Multiplexer block (TLMM) found
+  in the QDU1000 and QRU1000 platforms.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 
 properties:
   compatible:
@@ -19,105 +23,92 @@  properties:
       - const: qcom,qru1000-tlmm
 
   reg:
-    items:
-      - description: Base address of TLMM register space
-      - description: Size of TLMM register space
-
-  interrupts:
-    minItems: 0
     maxItems: 1
-    items:
-      - const: TLMM summary IRQ
-
+  interrupts: true
   interrupt-controller: true
-
-  '#interrupt-cells':
-    const: 2
-
+  '#interrupt-cells': true
   gpio-controller: true
+  '#gpio-cells': true
+  wakeup-parent: true
 
-  '#gpio-cells':
-    const: 2
-
-  wakeup-parent:
-    maxItems: 1
-    description:
-      Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
-      a general description of GPIO and interrupt bindings.
-
-      Please refer to pinctrl-bindings.txt in this directory for details of the
-      common pinctrl bindings used by client devices, including the meaning of the
-      phrase "pin configuration node".
-
-      The pin configuration nodes act as a container for an arbitrary number of
-      subnodes. Each of these subnodes represents some desired configuration for a
-      pin, a group, or a list of pins or groups. This configuration can include the
-      mux function to select on those pin(s)/group(s), and various pin configuration
-      parameters, such as pull-up, drive strength, etc.
+required:
+  - compatible
+  - reg
 
+additionalProperties: false
 
 # PIN CONFIGURATION NODES
-patternPropetries:
-  '^.*$':
-    if:
-      type: object
-    then:
-      properties:
-        pins:
-          description:
-            List of gpio pins affected by the properties specified in
-            this subnode.
-          items:
-            oneOf:
-              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
-              - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
-            minItems: 1
-            maxItems: 36
-        function:
-          description:
-            Specify the alternative function to be configured for the
-            specified pins. Functions are only valid for gpio pins.
-          enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
-            atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
-            cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
-            cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
-            cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
-            gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
-            mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
-            mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
-            mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
-            nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
-            phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
-            phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
-            phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
-            phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
-            phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
-            pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
-            qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
-            qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
-            qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
-            qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
-            qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
-            qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
-            qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
-            sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
-            tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
-            uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
-            vfr_1, vsense_trigger]
-        drive-strength:
-          enum: [2, 4, 6, 8, 10, 12, 14, 16]
-          default: 2
-          description:
-            Selects the drive strength for the specified pins, in mA.
-        bias-pull-down: true
-        bias-pull-up: true
-        bias-disable: true
-        output-high: true
-        output-low: true
-      required:
-        - pins
-        - function
-      additionalProperties: false
+patternProperties:
+  '-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-qdru1000-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-qdru1000-tlmm-state"
+
+$defs:
+  qcom-qdru1000-tlmm-state:
+    type: object
+    description:
+      Pinctrl nodes' client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in
+          this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])"
+            - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+        minItems: 1
+        maxItems: 36
+      function:
+        description:
+          Specify the alternative function to be configured for the
+          specified pins. Functions are only valid for gpio pins.
+        enum: [gpio, aon_cam, atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+          atest_usb0, atest_usb00, atest_usb01, atest_usb02, atest_usb03, audio_ref, cam_mclk,
+          cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+          cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, coex_uart2, cri_trng, cri_trng0,
+          cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1,
+          gcc_gp2, gcc_gp3, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+          mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1,
+          mi2s2_sck, mi2s2_ws, mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+          mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7, mss_grfc8, mss_grfc9,
+          nav_0, nav_1, nav_2, pcie0_clkreqn, pcie1_clkreqn, phase_flag0, phase_flag1,
+          phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+          phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+          phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+          phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+          phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9, pll_bist,
+          pll_clk, pri_mi2s, prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
+          qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+          qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
+          qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss, qlink1_enable,
+          qlink1_request, qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+          qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15,
+          qup16, qup17, qup18, qup19, qup2, qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8,
+          qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd,
+          sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
+          tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+          uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac, usb_phy, vfr_0,
+          vfr_1, vsense_trigger]
+
+      bias-disable: true
+      bias-pull-down: true
+      bias-pull-up: true
+      drive-strength: true
+      input-enable: true
+      output-high: true
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
 
 examples:
   - |
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index f415c13caae0..c8a7d6e44a81 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -390,6 +390,16 @@  config PINCTRL_SM8450
 	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
 	  Technologies Inc SM8450 platform.
 
+config PINCTRL_QDRU1000
+	tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
+	depends on GPIOLIB && OF
+	depends on PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
+	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	  Technologies Inc QDU1000 and QRU1000 platforms.
+
+
 config PINCTRL_LPASS_LPI
 	tristate "Qualcomm Technologies Inc LPASS LPI pin controller driver"
 	select PINMUX
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index fbd64853a24d..431a845b4e2d 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -45,4 +45,5 @@  obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
 obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
 obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
 obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
+obj-$(CONFIG_PINCTRL_QDRU1000) += pinctrl-qdru1000.o
 obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.c b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
new file mode 100644
index 000000000000..8b931ff80bb4
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.c
@@ -0,0 +1,59 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+#include "pinctrl-qdru1000.h"
+
+static const struct msm_pinctrl_soc_data qdru1000_tlmm = {
+	.pins = qdru1000_pins,
+	.npins = ARRAY_SIZE(qdru1000_pins),
+	.functions = qdru1000_functions,
+	.nfunctions = ARRAY_SIZE(qdru1000_functions),
+	.groups = qdru1000_groups,
+	.ngroups = ARRAY_SIZE(qdru1000_groups),
+	.ngpios = 151,
+};
+
+static int qdru1000_tlmm_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &qdru1000_tlmm);
+}
+
+static const struct of_device_id qdru1000_tlmm_of_match[] = {
+	{ .compatible = "qcom,qdu1000-tlmm", },
+	{ .compatible = "qcom,qru1000-tlmm", },
+	{ },
+};
+
+static struct platform_driver qdru1000_tlmm_driver = {
+	.driver = {
+		.name = "qdru1000-tlmm",
+		.of_match_table = qdru1000_tlmm_of_match,
+	},
+	.probe = qdru1000_tlmm_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init qdru1000_tlmm_init(void)
+{
+	return platform_driver_register(&qdru1000_tlmm_driver);
+}
+arch_initcall(qdru1000_tlmm_init);
+
+static void __exit qdru1000_tlmm_exit(void)
+{
+	platform_driver_unregister(&qdru1000_tlmm_driver);
+}
+module_exit(qdru1000_tlmm_exit);
+
+MODULE_DESCRIPTION("QTI QDRU1000 TLMM driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, qdru1000_tlmm_of_match);
diff --git a/drivers/pinctrl/qcom/pinctrl-qdru1000.h b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
new file mode 100644
index 000000000000..3c1f703ae53b
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-qdru1000.h
@@ -0,0 +1,1896 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#define FUNCTION(fname)			                \
+	[msm_mux_##fname] = {		                \
+		.name = #fname,				\
+		.groups = fname##_groups,               \
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define REG_BASE 0x100000
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9)	\
+	{					        \
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			msm_mux_gpio, /* gpio mode */	\
+			msm_mux_##f1,			\
+			msm_mux_##f2,			\
+			msm_mux_##f3,			\
+			msm_mux_##f4,			\
+			msm_mux_##f5,			\
+			msm_mux_##f6,			\
+			msm_mux_##f7,			\
+			msm_mux_##f8,			\
+			msm_mux_##f9			\
+		},				        \
+		.nfuncs = 10,				\
+		.ctl_reg = REG_BASE + REG_SIZE * id,			\
+		.io_reg = REG_BASE + 0x4 + REG_SIZE * id,		\
+		.intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id,		\
+		.intr_status_reg = REG_BASE + 0xc + REG_SIZE * id,	\
+		.intr_target_reg = REG_BASE + 0x8 + REG_SIZE * id,	\
+		.mux_bit = 2,			\
+		.pull_bit = 0,			\
+		.drv_bit = 6,			\
+		.oe_bit = 9,			\
+		.in_bit = 0,			\
+		.out_bit = 1,			\
+		.intr_enable_bit = 0,		\
+		.intr_status_bit = 0,		\
+		.intr_target_bit = 5,		\
+		.intr_target_kpss_val = 3,	\
+		.intr_raw_status_bit = 4,	\
+		.intr_polarity_bit = 1,		\
+		.intr_detection_bit = 2,	\
+		.intr_detection_width = 2,	\
+	}
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv)	\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = REG_BASE + ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define UFS_RESET(pg_name, offset)				\
+	{					        \
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = (unsigned int)ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = offset,			\
+		.io_reg = offset + 0x4,			\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = 3,				\
+		.drv_bit = 0,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = 0,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+#define QUP_I3C(qup_mode, qup_offset)			\
+	{						\
+		.mode = qup_mode,			\
+		.offset = qup_offset,			\
+	}
+
+static const struct pinctrl_pin_desc qdru1000_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+	PINCTRL_PIN(117, "GPIO_117"),
+	PINCTRL_PIN(118, "GPIO_118"),
+	PINCTRL_PIN(119, "GPIO_119"),
+	PINCTRL_PIN(120, "GPIO_120"),
+	PINCTRL_PIN(121, "GPIO_121"),
+	PINCTRL_PIN(122, "GPIO_122"),
+	PINCTRL_PIN(123, "GPIO_123"),
+	PINCTRL_PIN(124, "GPIO_124"),
+	PINCTRL_PIN(125, "GPIO_125"),
+	PINCTRL_PIN(126, "GPIO_126"),
+	PINCTRL_PIN(127, "GPIO_127"),
+	PINCTRL_PIN(128, "GPIO_128"),
+	PINCTRL_PIN(129, "GPIO_129"),
+	PINCTRL_PIN(130, "GPIO_130"),
+	PINCTRL_PIN(131, "GPIO_131"),
+	PINCTRL_PIN(132, "GPIO_132"),
+	PINCTRL_PIN(133, "GPIO_133"),
+	PINCTRL_PIN(134, "GPIO_134"),
+	PINCTRL_PIN(135, "GPIO_135"),
+	PINCTRL_PIN(136, "GPIO_136"),
+	PINCTRL_PIN(137, "GPIO_137"),
+	PINCTRL_PIN(138, "GPIO_138"),
+	PINCTRL_PIN(139, "GPIO_139"),
+	PINCTRL_PIN(140, "GPIO_140"),
+	PINCTRL_PIN(141, "GPIO_141"),
+	PINCTRL_PIN(142, "GPIO_142"),
+	PINCTRL_PIN(143, "GPIO_143"),
+	PINCTRL_PIN(144, "GPIO_144"),
+	PINCTRL_PIN(145, "GPIO_145"),
+	PINCTRL_PIN(146, "GPIO_146"),
+	PINCTRL_PIN(147, "GPIO_147"),
+	PINCTRL_PIN(148, "GPIO_148"),
+	PINCTRL_PIN(149, "GPIO_149"),
+	PINCTRL_PIN(150, "GPIO_150"),
+	PINCTRL_PIN(151, "SDC1_RCLK"),
+	PINCTRL_PIN(152, "SDC1_CLK"),
+	PINCTRL_PIN(153, "SDC1_CMD"),
+	PINCTRL_PIN(154, "SDC1_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+	static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+DECLARE_MSM_GPIO_PINS(146);
+DECLARE_MSM_GPIO_PINS(147);
+DECLARE_MSM_GPIO_PINS(148);
+DECLARE_MSM_GPIO_PINS(149);
+DECLARE_MSM_GPIO_PINS(150);
+
+static const unsigned int sdc1_rclk_pins[] = { 151 };
+static const unsigned int sdc1_clk_pins[] = { 152 };
+static const unsigned int sdc1_cmd_pins[] = { 153 };
+static const unsigned int sdc1_data_pins[] = { 154 };
+
+enum qdru1000_functions {
+	msm_mux_gpio,
+	msm_mux_CMO_PRI,
+	msm_mux_SI5518_INT,
+	msm_mux_atest_char_start,
+	msm_mux_atest_char_status0,
+	msm_mux_atest_char_status1,
+	msm_mux_atest_char_status2,
+	msm_mux_atest_char_status3,
+	msm_mux_atest_usb0_atereset,
+	msm_mux_atest_usb0_testdataout00,
+	msm_mux_atest_usb0_testdataout01,
+	msm_mux_atest_usb0_testdataout02,
+	msm_mux_atest_usb0_testdataout03,
+	msm_mux_char_exec_pending,
+	msm_mux_char_exec_release,
+	msm_mux_cmu_rng_entropy0,
+	msm_mux_cmu_rng_entropy1,
+	msm_mux_cmu_rng_entropy2,
+	msm_mux_cmu_rng_entropy3,
+	msm_mux_dbg_out_clk,
+	msm_mux_ddr_bist_complete,
+	msm_mux_ddr_bist_fail,
+	msm_mux_ddr_bist_start,
+	msm_mux_ddr_bist_stop,
+	msm_mux_ddr_pxi0_test,
+	msm_mux_ddr_pxi1_test,
+	msm_mux_ddr_pxi2_test,
+	msm_mux_ddr_pxi3_test,
+	msm_mux_ddr_pxi4_test,
+	msm_mux_ddr_pxi5_test,
+	msm_mux_ddr_pxi6_test,
+	msm_mux_ddr_pxi7_test,
+	msm_mux_eth012_int_n,
+	msm_mux_eth345_int_n,
+	msm_mux_eth6_int_n,
+	msm_mux_gcc_gp1_clk,
+	msm_mux_gcc_gp2_clk,
+	msm_mux_gcc_gp3_clk,
+	msm_mux_gps_pps_in,
+	msm_mux_hardsync_pps_in,
+	msm_mux_intr_c_raw0,
+	msm_mux_intr_c_raw1,
+	msm_mux_intr_c_raw2,
+	msm_mux_jitter_bist_ref,
+	msm_mux_pcie0,
+	msm_mux_pcie0_clkreqn,
+	msm_mux_pcie0_wake,
+	msm_mux_phase_flag_status0,
+	msm_mux_phase_flag_status1,
+	msm_mux_phase_flag_status10,
+	msm_mux_phase_flag_status11,
+	msm_mux_phase_flag_status12,
+	msm_mux_phase_flag_status13,
+	msm_mux_phase_flag_status14,
+	msm_mux_phase_flag_status15,
+	msm_mux_phase_flag_status16,
+	msm_mux_phase_flag_status17,
+	msm_mux_phase_flag_status18,
+	msm_mux_phase_flag_status19,
+	msm_mux_phase_flag_status2,
+	msm_mux_phase_flag_status20,
+	msm_mux_phase_flag_status21,
+	msm_mux_phase_flag_status22,
+	msm_mux_phase_flag_status23,
+	msm_mux_phase_flag_status24,
+	msm_mux_phase_flag_status25,
+	msm_mux_phase_flag_status26,
+	msm_mux_phase_flag_status27,
+	msm_mux_phase_flag_status28,
+	msm_mux_phase_flag_status29,
+	msm_mux_phase_flag_status3,
+	msm_mux_phase_flag_status30,
+	msm_mux_phase_flag_status31,
+	msm_mux_phase_flag_status4,
+	msm_mux_phase_flag_status5,
+	msm_mux_phase_flag_status6,
+	msm_mux_phase_flag_status7,
+	msm_mux_phase_flag_status8,
+	msm_mux_phase_flag_status9,
+	msm_mux_pll_bist_sync,
+	msm_mux_pll_clk_aux,
+	msm_mux_prng_rosc_test0,
+	msm_mux_prng_rosc_test1,
+	msm_mux_prng_rosc_test2,
+	msm_mux_prng_rosc_test3,
+	msm_mux_qdss_cti_trig0,
+	msm_mux_qdss_cti_trig1,
+	msm_mux_qdss_cti_trig2,
+	msm_mux_qdss_cti_trig3,
+	msm_mux_qdss_cti_trig4,
+	msm_mux_qdss_gpio_traceclk,
+	msm_mux_qdss_gpio_tracectl,
+	msm_mux_qdss_gpio_tracedata0,
+	msm_mux_qdss_gpio_tracedata1,
+	msm_mux_qdss_gpio_tracedata10,
+	msm_mux_qdss_gpio_tracedata11,
+	msm_mux_qdss_gpio_tracedata12,
+	msm_mux_qdss_gpio_tracedata13,
+	msm_mux_qdss_gpio_tracedata14,
+	msm_mux_qdss_gpio_tracedata15,
+	msm_mux_qdss_gpio_tracedata2,
+	msm_mux_qdss_gpio_tracedata3,
+	msm_mux_qdss_gpio_tracedata4,
+	msm_mux_qdss_gpio_tracedata5,
+	msm_mux_qdss_gpio_tracedata6,
+	msm_mux_qdss_gpio_tracedata7,
+	msm_mux_qdss_gpio_tracedata8,
+	msm_mux_qdss_gpio_tracedata9,
+	msm_mux_qlink0_enable,
+	msm_mux_qlink0_request,
+	msm_mux_qlink0_wmss_reset,
+	msm_mux_qlink1_enable,
+	msm_mux_qlink1_request,
+	msm_mux_qlink1_wmss_reset,
+	msm_mux_qlink2_enable,
+	msm_mux_qlink2_request,
+	msm_mux_qlink2_wmss_reset,
+	msm_mux_qlink3_enable,
+	msm_mux_qlink3_request,
+	msm_mux_qlink3_wmss_reset,
+	msm_mux_qlink4_enable,
+	msm_mux_qlink4_request,
+	msm_mux_qlink4_wmss_reset,
+	msm_mux_qlink5_enable,
+	msm_mux_qlink5_request,
+	msm_mux_qlink5_wmss_reset,
+	msm_mux_qlink6_enable,
+	msm_mux_qlink6_request,
+	msm_mux_qlink6_wmss_reset,
+	msm_mux_qlink7_enable,
+	msm_mux_qlink7_request,
+	msm_mux_qlink7_wmss_reset,
+	msm_mux_qspi_clk,
+	msm_mux_qspi_cs_n,
+	msm_mux_qspi_data_0,
+	msm_mux_qspi_data_1,
+	msm_mux_qspi_data_2,
+	msm_mux_qspi_data_3,
+	msm_mux_qup0_se0_l0,
+	msm_mux_qup0_se0_l1,
+	msm_mux_qup0_se0_l2,
+	msm_mux_qup0_se0_l3,
+	msm_mux_qup0_se1_l0,
+	msm_mux_qup0_se1_l1,
+	msm_mux_qup0_se1_l2,
+	msm_mux_qup0_se1_l3,
+	msm_mux_qup0_se2_l0,
+	msm_mux_qup0_se2_l1,
+	msm_mux_qup0_se2_l2,
+	msm_mux_qup0_se2_l3,
+	msm_mux_qup0_se3_l0,
+	msm_mux_qup0_se3_l1,
+	msm_mux_qup0_se3_l2,
+	msm_mux_qup0_se3_l3,
+	msm_mux_qup0_se4_l0,
+	msm_mux_qup0_se4_l1,
+	msm_mux_qup0_se4_l2,
+	msm_mux_qup0_se4_l3,
+	msm_mux_qup0_se5_l0,
+	msm_mux_qup0_se5_l1,
+	msm_mux_qup0_se5_l2,
+	msm_mux_qup0_se5_l3,
+	msm_mux_qup0_se6_l0,
+	msm_mux_qup0_se6_l1,
+	msm_mux_qup0_se6_l2,
+	msm_mux_qup0_se6_l3,
+	msm_mux_qup0_se7_l0,
+	msm_mux_qup0_se7_l1,
+	msm_mux_qup0_se7_l2,
+	msm_mux_qup0_se7_l3,
+	msm_mux_qup1_se0_l0,
+	msm_mux_qup1_se0_l1,
+	msm_mux_qup1_se0_l2,
+	msm_mux_qup1_se0_l3,
+	msm_mux_qup1_se1_l0,
+	msm_mux_qup1_se1_l1,
+	msm_mux_qup1_se1_l2,
+	msm_mux_qup1_se1_l3,
+	msm_mux_qup1_se2_l0,
+	msm_mux_qup1_se2_l1,
+	msm_mux_qup1_se2_l2,
+	msm_mux_qup1_se2_l3,
+	msm_mux_qup1_se3_l0,
+	msm_mux_qup1_se3_l1,
+	msm_mux_qup1_se3_l2,
+	msm_mux_qup1_se3_l3,
+	msm_mux_qup1_se4_l0,
+	msm_mux_qup1_se4_l1,
+	msm_mux_qup1_se4_l2,
+	msm_mux_qup1_se4_l3,
+	msm_mux_qup1_se5_l0,
+	msm_mux_qup1_se5_l1,
+	msm_mux_qup1_se5_l2,
+	msm_mux_qup1_se5_l3,
+	msm_mux_qup1_se6_l0,
+	msm_mux_qup1_se6_l1,
+	msm_mux_qup1_se6_l2,
+	msm_mux_qup1_se6_l3,
+	msm_mux_qup1_se6_l4,
+	msm_mux_qup1_se6_l5,
+	msm_mux_qup1_se6_l6,
+	msm_mux_qup1_se7_l0,
+	msm_mux_qup1_se7_l1,
+	msm_mux_qup1_se7_l2,
+	msm_mux_qup1_se7_l3,
+	msm_mux_qup1_se7_l4,
+	msm_mux_qup1_se7_l5,
+	msm_mux_qup1_se7_l6,
+	msm_mux_qup2_se0_l0,
+	msm_mux_qup2_se0_l1,
+	msm_mux_qup2_se0_l2,
+	msm_mux_qup2_se0_l3,
+	msm_mux_qup2_se1_l0,
+	msm_mux_qup2_se1_l1,
+	msm_mux_qup2_se1_l2,
+	msm_mux_qup2_se1_l3,
+	msm_mux_qup2_se2_l0,
+	msm_mux_qup2_se2_l1,
+	msm_mux_qup2_se2_l2,
+	msm_mux_qup2_se2_l3,
+	msm_mux_smb_alert,
+	msm_mux_smb_alert_n,
+	msm_mux_smb_clk,
+	msm_mux_smb_dat,
+	msm_mux_tb_trig_sdc1,
+	msm_mux_tgu_ch0_trigout,
+	msm_mux_tgu_ch1_trigout,
+	msm_mux_tgu_ch2_trigout,
+	msm_mux_tgu_ch3_trigout,
+	msm_mux_tgu_ch4_trigout,
+	msm_mux_tgu_ch5_trigout,
+	msm_mux_tgu_ch6_trigout,
+	msm_mux_tgu_ch7_trigout,
+	msm_mux_tmess_prng_rosc0,
+	msm_mux_tmess_prng_rosc1,
+	msm_mux_tmess_prng_rosc2,
+	msm_mux_tmess_prng_rosc3,
+	msm_mux_tod_pps_in,
+	msm_mux_tsense_pwm1_out,
+	msm_mux_tsense_pwm2_out,
+	msm_mux_usb2phy_ac_en,
+	msm_mux_usb_con_det,
+	msm_mux_usb_dfp_en,
+	msm_mux_usb_phy_ps,
+	msm_mux_vfr_0,
+	msm_mux_vfr_1,
+	msm_mux_vsense_trigger_mirnat,
+	msm_mux__,
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+	"gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+	"gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+	"gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+	"gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+	"gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146",
+	"gpio147", "gpio148", "gpio149", "gpio150",
+};
+static const char * const CMO_PRI_groups[] = {
+	"gpio103",
+};
+static const char * const SI5518_INT_groups[] = {
+	"gpio44",
+};
+static const char * const atest_char_start_groups[] = {
+	"gpio95",
+};
+static const char * const atest_char_status0_groups[] = {
+	"gpio92",
+};
+static const char * const atest_char_status1_groups[] = {
+	"gpio91",
+};
+static const char * const atest_char_status2_groups[] = {
+	"gpio90",
+};
+static const char * const atest_char_status3_groups[] = {
+	"gpio89",
+};
+static const char * const atest_usb0_atereset_groups[] = {
+	"gpio114",
+};
+static const char * const atest_usb0_testdataout00_groups[] = {
+	"gpio115",
+};
+static const char * const atest_usb0_testdataout01_groups[] = {
+	"gpio116",
+};
+static const char * const atest_usb0_testdataout02_groups[] = {
+	"gpio117",
+};
+static const char * const atest_usb0_testdataout03_groups[] = {
+	"gpio118",
+};
+static const char * const char_exec_pending_groups[] = {
+	"gpio99",
+};
+static const char * const char_exec_release_groups[] = {
+	"gpio100",
+};
+static const char * const cmu_rng_entropy0_groups[] = {
+	"gpio92",
+};
+static const char * const cmu_rng_entropy1_groups[] = {
+	"gpio91",
+};
+static const char * const cmu_rng_entropy2_groups[] = {
+	"gpio90",
+};
+static const char * const cmu_rng_entropy3_groups[] = {
+	"gpio89",
+};
+static const char * const dbg_out_clk_groups[] = {
+	"gpio136",
+};
+static const char * const ddr_bist_complete_groups[] = {
+	"gpio2",
+};
+static const char * const ddr_bist_fail_groups[] = {
+	"gpio0",
+};
+static const char * const ddr_bist_start_groups[] = {
+	"gpio1",
+};
+static const char * const ddr_bist_stop_groups[] = {
+	"gpio3",
+};
+static const char * const ddr_pxi0_test_groups[] = {
+	"gpio114", "gpio115",
+};
+static const char * const ddr_pxi1_test_groups[] = {
+	"gpio116", "gpio117",
+};
+static const char * const ddr_pxi2_test_groups[] = {
+	"gpio118", "gpio119",
+};
+static const char * const ddr_pxi3_test_groups[] = {
+	"gpio120", "gpio121",
+};
+static const char * const ddr_pxi4_test_groups[] = {
+	"gpio122", "gpio123",
+};
+static const char * const ddr_pxi5_test_groups[] = {
+	"gpio124", "gpio125",
+};
+static const char * const ddr_pxi6_test_groups[] = {
+	"gpio126", "gpio127",
+};
+static const char * const ddr_pxi7_test_groups[] = {
+	"gpio128", "gpio129",
+};
+static const char * const eth012_int_n_groups[] = {
+	"gpio86",
+};
+static const char * const eth345_int_n_groups[] = {
+	"gpio87",
+};
+static const char * const eth6_int_n_groups[] = {
+	"gpio88",
+};
+static const char * const gcc_gp1_clk_groups[] = {
+	"gpio86", "gpio134",
+};
+static const char * const gcc_gp2_clk_groups[] = {
+	"gpio87", "gpio135",
+};
+static const char * const gcc_gp3_clk_groups[] = {
+	"gpio88", "gpio136",
+};
+static const char * const gps_pps_in_groups[] = {
+	"gpio49",
+};
+static const char * const hardsync_pps_in_groups[] = {
+	"gpio47",
+};
+static const char * const intr_c_raw0_groups[] = {
+	"gpio26", "gpio141",
+};
+static const char * const intr_c_raw1_groups[] = {
+	"gpio27", "gpio142",
+};
+static const char * const intr_c_raw2_groups[] = {
+	"gpio28", "gpio143",
+};
+static const char * const jitter_bist_ref_groups[] = {
+	"gpio130",
+};
+static const char * const pcie0_groups[] = {
+	"gpio98",
+};
+static const char * const pcie0_clkreqn_groups[] = {
+	"gpio99",
+};
+static const char * const pcie0_wake_groups[] = {
+	"gpio100",
+};
+static const char * const phase_flag_status0_groups[] = {
+	"gpio6",
+};
+static const char * const phase_flag_status1_groups[] = {
+	"gpio7",
+};
+static const char * const phase_flag_status10_groups[] = {
+	"gpio22",
+};
+static const char * const phase_flag_status11_groups[] = {
+	"gpio23",
+};
+static const char * const phase_flag_status12_groups[] = {
+	"gpio24",
+};
+static const char * const phase_flag_status13_groups[] = {
+	"gpio25",
+};
+static const char * const phase_flag_status14_groups[] = {
+	"gpio26",
+};
+static const char * const phase_flag_status15_groups[] = {
+	"gpio27",
+};
+static const char * const phase_flag_status16_groups[] = {
+	"gpio28",
+};
+static const char * const phase_flag_status17_groups[] = {
+	"gpio29",
+};
+static const char * const phase_flag_status18_groups[] = {
+	"gpio30",
+};
+static const char * const phase_flag_status19_groups[] = {
+	"gpio31",
+};
+static const char * const phase_flag_status2_groups[] = {
+	"gpio8",
+};
+static const char * const phase_flag_status20_groups[] = {
+	"gpio32",
+};
+static const char * const phase_flag_status21_groups[] = {
+	"gpio33",
+};
+static const char * const phase_flag_status22_groups[] = {
+	"gpio42",
+};
+static const char * const phase_flag_status23_groups[] = {
+	"gpio43",
+};
+static const char * const phase_flag_status24_groups[] = {
+	"gpio89",
+};
+static const char * const phase_flag_status25_groups[] = {
+	"gpio90",
+};
+static const char * const phase_flag_status26_groups[] = {
+	"gpio91",
+};
+static const char * const phase_flag_status27_groups[] = {
+	"gpio92",
+};
+static const char * const phase_flag_status28_groups[] = {
+	"gpio95",
+};
+static const char * const phase_flag_status29_groups[] = {
+	"gpio96",
+};
+static const char * const phase_flag_status3_groups[] = {
+	"gpio9",
+};
+static const char * const phase_flag_status30_groups[] = {
+	"gpio97",
+};
+static const char * const phase_flag_status31_groups[] = {
+	"gpio102",
+};
+static const char * const phase_flag_status4_groups[] = {
+	"gpio16",
+};
+static const char * const phase_flag_status5_groups[] = {
+	"gpio17",
+};
+static const char * const phase_flag_status6_groups[] = {
+	"gpio18",
+};
+static const char * const phase_flag_status7_groups[] = {
+	"gpio19",
+};
+static const char * const phase_flag_status8_groups[] = {
+	"gpio20",
+};
+static const char * const phase_flag_status9_groups[] = {
+	"gpio21",
+};
+static const char * const pll_bist_sync_groups[] = {
+	"gpio20",
+};
+static const char * const pll_clk_aux_groups[] = {
+	"gpio98",
+};
+static const char * const prng_rosc_test0_groups[] = {
+	"gpio18",
+};
+static const char * const prng_rosc_test1_groups[] = {
+	"gpio19",
+};
+static const char * const prng_rosc_test2_groups[] = {
+	"gpio20",
+};
+static const char * const prng_rosc_test3_groups[] = {
+	"gpio21",
+};
+static const char * const qdss_cti_trig0_groups[] = {
+	"gpio40", "gpio48", "gpio86", "gpio93",
+};
+static const char * const qdss_cti_trig1_groups[] = {
+	"gpio37", "gpio49", "gpio87", "gpio94",
+};
+static const char * const qdss_cti_trig2_groups[] = {
+	"gpio130", "gpio131", "gpio132", "gpio135",
+};
+static const char * const qdss_cti_trig3_groups[] = {
+	"gpio36", "gpio41", "gpio133", "gpio134",
+};
+static const char * const qdss_cti_trig4_groups[] = {
+	"gpio38", "gpio39", "gpio144", "gpio145",
+};
+static const char * const qdss_gpio_traceclk_groups[] = {
+	"gpio34", "gpio88",
+};
+static const char * const qdss_gpio_tracectl_groups[] = {
+	"gpio35", "gpio103",
+};
+static const char * const qdss_gpio_tracedata0_groups[] = {
+	"gpio6", "gpio18",
+};
+static const char * const qdss_gpio_tracedata1_groups[] = {
+	"gpio7", "gpio19",
+};
+static const char * const qdss_gpio_tracedata10_groups[] = {
+	"gpio28", "gpio91",
+};
+static const char * const qdss_gpio_tracedata11_groups[] = {
+	"gpio29", "gpio92",
+};
+static const char * const qdss_gpio_tracedata12_groups[] = {
+	"gpio30", "gpio95",
+};
+static const char * const qdss_gpio_tracedata13_groups[] = {
+	"gpio31", "gpio96",
+};
+static const char * const qdss_gpio_tracedata14_groups[] = {
+	"gpio32", "gpio97",
+};
+static const char * const qdss_gpio_tracedata15_groups[] = {
+	"gpio33", "gpio102",
+};
+static const char * const qdss_gpio_tracedata2_groups[] = {
+	"gpio8", "gpio20",
+};
+static const char * const qdss_gpio_tracedata3_groups[] = {
+	"gpio9", "gpio21",
+};
+static const char * const qdss_gpio_tracedata4_groups[] = {
+	"gpio16", "gpio22",
+};
+static const char * const qdss_gpio_tracedata5_groups[] = {
+	"gpio17", "gpio23",
+};
+static const char * const qdss_gpio_tracedata6_groups[] = {
+	"gpio24", "gpio42",
+};
+static const char * const qdss_gpio_tracedata7_groups[] = {
+	"gpio25", "gpio43",
+};
+static const char * const qdss_gpio_tracedata8_groups[] = {
+	"gpio26", "gpio89",
+};
+static const char * const qdss_gpio_tracedata9_groups[] = {
+	"gpio27", "gpio90",
+};
+static const char * const qlink0_enable_groups[] = {
+	"gpio67",
+};
+static const char * const qlink0_request_groups[] = {
+	"gpio66",
+};
+static const char * const qlink0_wmss_reset_groups[] = {
+	"gpio82",
+};
+static const char * const qlink1_enable_groups[] = {
+	"gpio69",
+};
+static const char * const qlink1_request_groups[] = {
+	"gpio68",
+};
+static const char * const qlink1_wmss_reset_groups[] = {
+	"gpio83",
+};
+static const char * const qlink2_enable_groups[] = {
+	"gpio71",
+};
+static const char * const qlink2_request_groups[] = {
+	"gpio70",
+};
+static const char * const qlink2_wmss_reset_groups[] = {
+	"gpio138",
+};
+static const char * const qlink3_enable_groups[] = {
+	"gpio73",
+};
+static const char * const qlink3_request_groups[] = {
+	"gpio72",
+};
+static const char * const qlink3_wmss_reset_groups[] = {
+	"gpio139",
+};
+static const char * const qlink4_enable_groups[] = {
+	"gpio75",
+};
+static const char * const qlink4_request_groups[] = {
+	"gpio74",
+};
+static const char * const qlink4_wmss_reset_groups[] = {
+	"gpio84",
+};
+static const char * const qlink5_enable_groups[] = {
+	"gpio77",
+};
+static const char * const qlink5_request_groups[] = {
+	"gpio76",
+};
+static const char * const qlink5_wmss_reset_groups[] = {
+	"gpio85",
+};
+static const char * const qlink6_enable_groups[] = {
+	"gpio79",
+};
+static const char * const qlink6_request_groups[] = {
+	"gpio78",
+};
+static const char * const qlink6_wmss_reset_groups[] = {
+	"gpio56",
+};
+static const char * const qlink7_enable_groups[] = {
+	"gpio81",
+};
+static const char * const qlink7_request_groups[] = {
+	"gpio80",
+};
+static const char * const qlink7_wmss_reset_groups[] = {
+	"gpio57",
+};
+static const char * const qspi_clk_groups[] = {
+	"gpio126",
+};
+static const char * const qspi_cs_n_groups[] = {
+	"gpio125",
+};
+static const char * const qspi_data_0_groups[] = {
+	"gpio114",
+};
+static const char * const qspi_data_1_groups[] = {
+	"gpio115",
+};
+static const char * const qspi_data_2_groups[] = {
+	"gpio116",
+};
+static const char * const qspi_data_3_groups[] = {
+	"gpio117",
+};
+static const char * const qup0_se0_l0_groups[] = {
+	"gpio6",
+};
+static const char * const qup0_se0_l1_groups[] = {
+	"gpio7",
+};
+static const char * const qup0_se0_l2_groups[] = {
+	"gpio8",
+};
+static const char * const qup0_se0_l3_groups[] = {
+	"gpio9",
+};
+static const char * const qup0_se1_l0_groups[] = {
+	"gpio10",
+};
+static const char * const qup0_se1_l1_groups[] = {
+	"gpio11",
+};
+static const char * const qup0_se1_l2_groups[] = {
+	"gpio12",
+};
+static const char * const qup0_se1_l3_groups[] = {
+	"gpio13",
+};
+static const char * const qup0_se2_l0_groups[] = {
+	"gpio12",
+};
+static const char * const qup0_se2_l1_groups[] = {
+	"gpio13",
+};
+static const char * const qup0_se2_l2_groups[] = {
+	"gpio10",
+};
+static const char * const qup0_se2_l3_groups[] = {
+	"gpio11",
+};
+static const char * const qup0_se3_l0_groups[] = {
+	"gpio14",
+};
+static const char * const qup0_se3_l1_groups[] = {
+	"gpio15",
+};
+static const char * const qup0_se3_l2_groups[] = {
+	"gpio16",
+};
+static const char * const qup0_se3_l3_groups[] = {
+	"gpio17",
+};
+static const char * const qup0_se4_l0_groups[] = {
+	"gpio16",
+};
+static const char * const qup0_se4_l1_groups[] = {
+	"gpio17",
+};
+static const char * const qup0_se4_l2_groups[] = {
+	"gpio14",
+};
+static const char * const qup0_se4_l3_groups[] = {
+	"gpio15",
+};
+static const char * const qup0_se5_l0_groups[] = {
+	"gpio130",
+};
+static const char * const qup0_se5_l1_groups[] = {
+	"gpio131",
+};
+static const char * const qup0_se5_l2_groups[] = {
+	"gpio132",
+};
+static const char * const qup0_se5_l3_groups[] = {
+	"gpio133",
+};
+static const char * const qup0_se6_l0_groups[] = {
+	"gpio132",
+};
+static const char * const qup0_se6_l1_groups[] = {
+	"gpio133",
+};
+static const char * const qup0_se6_l2_groups[] = {
+	"gpio130",
+};
+static const char * const qup0_se6_l3_groups[] = {
+	"gpio131",
+};
+static const char * const qup0_se7_l0_groups[] = {
+	"gpio134",
+};
+static const char * const qup0_se7_l1_groups[] = {
+	"gpio135",
+};
+static const char * const qup0_se7_l2_groups[] = {
+	"gpio134",
+};
+static const char * const qup0_se7_l3_groups[] = {
+	"gpio135",
+};
+static const char * const qup1_se0_l0_groups[] = {
+	"gpio18",
+};
+static const char * const qup1_se0_l1_groups[] = {
+	"gpio19",
+};
+static const char * const qup1_se0_l2_groups[] = {
+	"gpio20",
+};
+static const char * const qup1_se0_l3_groups[] = {
+	"gpio21",
+};
+static const char * const qup1_se1_l0_groups[] = {
+	"gpio22",
+};
+static const char * const qup1_se1_l1_groups[] = {
+	"gpio23",
+};
+static const char * const qup1_se1_l2_groups[] = {
+	"gpio24",
+};
+static const char * const qup1_se1_l3_groups[] = {
+	"gpio25",
+};
+static const char * const qup1_se2_l0_groups[] = {
+	"gpio24",
+};
+static const char * const qup1_se2_l1_groups[] = {
+	"gpio25",
+};
+static const char * const qup1_se2_l2_groups[] = {
+	"gpio22",
+};
+static const char * const qup1_se2_l3_groups[] = {
+	"gpio23",
+};
+static const char * const qup1_se3_l0_groups[] = {
+	"gpio26",
+};
+static const char * const qup1_se3_l1_groups[] = {
+	"gpio27",
+};
+static const char * const qup1_se3_l2_groups[] = {
+	"gpio28",
+};
+static const char * const qup1_se3_l3_groups[] = {
+	"gpio29",
+};
+static const char * const qup1_se4_l0_groups[] = {
+	"gpio28",
+};
+static const char * const qup1_se4_l1_groups[] = {
+	"gpio29",
+};
+static const char * const qup1_se4_l2_groups[] = {
+	"gpio26",
+};
+static const char * const qup1_se4_l3_groups[] = {
+	"gpio27",
+};
+static const char * const qup1_se5_l0_groups[] = {
+	"gpio30",
+};
+static const char * const qup1_se5_l1_groups[] = {
+	"gpio31",
+};
+static const char * const qup1_se5_l2_groups[] = {
+	"gpio32",
+};
+static const char * const qup1_se5_l3_groups[] = {
+	"gpio33",
+};
+static const char * const qup1_se6_l0_groups[] = {
+	"gpio34",
+};
+static const char * const qup1_se6_l1_groups[] = {
+	"gpio35",
+};
+static const char * const qup1_se6_l2_groups[] = {
+	"gpio36",
+};
+static const char * const qup1_se6_l3_groups[] = {
+	"gpio37",
+};
+static const char * const qup1_se6_l4_groups[] = {
+	"gpio38",
+};
+static const char * const qup1_se6_l5_groups[] = {
+	"gpio39",
+};
+static const char * const qup1_se6_l6_groups[] = {
+	"gpio29",
+};
+static const char * const qup1_se7_l0_groups[] = {
+	"gpio40",
+};
+static const char * const qup1_se7_l1_groups[] = {
+	"gpio41",
+};
+static const char * const qup1_se7_l2_groups[] = {
+	"gpio30",
+};
+static const char * const qup1_se7_l3_groups[] = {
+	"gpio31",
+};
+static const char * const qup1_se7_l4_groups[] = {
+	"gpio12",
+};
+static const char * const qup1_se7_l5_groups[] = {
+	"gpio13",
+};
+static const char * const qup1_se7_l6_groups[] = {
+	"gpio14",
+};
+static const char * const qup2_se0_l0_groups[] = {
+	"gpio0",
+};
+static const char * const qup2_se0_l1_groups[] = {
+	"gpio1",
+};
+static const char * const qup2_se0_l2_groups[] = {
+	"gpio2",
+};
+static const char * const qup2_se0_l3_groups[] = {
+	"gpio3",
+};
+static const char * const qup2_se1_l0_groups[] = {
+	"gpio2",
+};
+static const char * const qup2_se1_l1_groups[] = {
+	"gpio3",
+};
+static const char * const qup2_se1_l2_groups[] = {
+	"gpio0",
+};
+static const char * const qup2_se1_l3_groups[] = {
+	"gpio1",
+};
+static const char * const qup2_se2_l0_groups[] = {
+	"gpio4",
+};
+static const char * const qup2_se2_l1_groups[] = {
+	"gpio5",
+};
+static const char * const qup2_se2_l2_groups[] = {
+	"gpio128",
+};
+static const char * const qup2_se2_l3_groups[] = {
+	"gpio129",
+};
+static const char * const smb_alert_groups[] = {
+	"gpio101",
+};
+static const char * const smb_alert_n_groups[] = {
+	"gpio88",
+};
+static const char * const smb_clk_groups[] = {
+	"gpio133",
+};
+static const char * const smb_dat_groups[] = {
+	"gpio132",
+};
+static const char * const tb_trig_sdc1_groups[] = {
+	"gpio114",
+};
+static const char * const tgu_ch0_trigout_groups[] = {
+	"gpio6",
+};
+static const char * const tgu_ch1_trigout_groups[] = {
+	"gpio7",
+};
+static const char * const tgu_ch2_trigout_groups[] = {
+	"gpio8",
+};
+static const char * const tgu_ch3_trigout_groups[] = {
+	"gpio9",
+};
+static const char * const tgu_ch4_trigout_groups[] = {
+	"gpio44",
+};
+static const char * const tgu_ch5_trigout_groups[] = {
+	"gpio45",
+};
+static const char * const tgu_ch6_trigout_groups[] = {
+	"gpio46",
+};
+static const char * const tgu_ch7_trigout_groups[] = {
+	"gpio47",
+};
+static const char * const tmess_prng_rosc0_groups[] = {
+	"gpio33",
+};
+static const char * const tmess_prng_rosc1_groups[] = {
+	"gpio32",
+};
+static const char * const tmess_prng_rosc2_groups[] = {
+	"gpio31",
+};
+static const char * const tmess_prng_rosc3_groups[] = {
+	"gpio30",
+};
+static const char * const tod_pps_in_groups[] = {
+	"gpio48",
+};
+static const char * const tsense_pwm1_out_groups[] = {
+	"gpio2",
+};
+static const char * const tsense_pwm2_out_groups[] = {
+	"gpio3",
+};
+static const char * const usb2phy_ac_en_groups[] = {
+	"gpio90",
+};
+static const char * const usb_con_det_groups[] = {
+	"gpio42",
+};
+static const char * const usb_dfp_en_groups[] = {
+	"gpio43",
+};
+static const char * const usb_phy_ps_groups[] = {
+	"gpio91",
+};
+static const char * const vfr_0_groups[] = {
+	"gpio93",
+};
+static const char * const vfr_1_groups[] = {
+	"gpio94",
+};
+static const char * const vsense_trigger_mirnat_groups[] = {
+	"gpio135",
+};
+
+static const struct msm_function qdru1000_functions[] = {
+	FUNCTION(gpio),
+	FUNCTION(CMO_PRI),
+	FUNCTION(SI5518_INT),
+	FUNCTION(atest_char_start),
+	FUNCTION(atest_char_status0),
+	FUNCTION(atest_char_status1),
+	FUNCTION(atest_char_status2),
+	FUNCTION(atest_char_status3),
+	FUNCTION(atest_usb0_atereset),
+	FUNCTION(atest_usb0_testdataout00),
+	FUNCTION(atest_usb0_testdataout01),
+	FUNCTION(atest_usb0_testdataout02),
+	FUNCTION(atest_usb0_testdataout03),
+	FUNCTION(char_exec_pending),
+	FUNCTION(char_exec_release),
+	FUNCTION(cmu_rng_entropy0),
+	FUNCTION(cmu_rng_entropy1),
+	FUNCTION(cmu_rng_entropy2),
+	FUNCTION(cmu_rng_entropy3),
+	FUNCTION(dbg_out_clk),
+	FUNCTION(ddr_bist_complete),
+	FUNCTION(ddr_bist_fail),
+	FUNCTION(ddr_bist_start),
+	FUNCTION(ddr_bist_stop),
+	FUNCTION(ddr_pxi0_test),
+	FUNCTION(ddr_pxi1_test),
+	FUNCTION(ddr_pxi2_test),
+	FUNCTION(ddr_pxi3_test),
+	FUNCTION(ddr_pxi4_test),
+	FUNCTION(ddr_pxi5_test),
+	FUNCTION(ddr_pxi6_test),
+	FUNCTION(ddr_pxi7_test),
+	FUNCTION(eth012_int_n),
+	FUNCTION(eth345_int_n),
+	FUNCTION(eth6_int_n),
+	FUNCTION(gcc_gp1_clk),
+	FUNCTION(gcc_gp2_clk),
+	FUNCTION(gcc_gp3_clk),
+	FUNCTION(gps_pps_in),
+	FUNCTION(hardsync_pps_in),
+	FUNCTION(intr_c_raw0),
+	FUNCTION(intr_c_raw1),
+	FUNCTION(intr_c_raw2),
+	FUNCTION(jitter_bist_ref),
+	FUNCTION(pcie0),
+	FUNCTION(pcie0_clkreqn),
+	FUNCTION(pcie0_wake),
+	FUNCTION(phase_flag_status0),
+	FUNCTION(phase_flag_status1),
+	FUNCTION(phase_flag_status10),
+	FUNCTION(phase_flag_status11),
+	FUNCTION(phase_flag_status12),
+	FUNCTION(phase_flag_status13),
+	FUNCTION(phase_flag_status14),
+	FUNCTION(phase_flag_status15),
+	FUNCTION(phase_flag_status16),
+	FUNCTION(phase_flag_status17),
+	FUNCTION(phase_flag_status18),
+	FUNCTION(phase_flag_status19),
+	FUNCTION(phase_flag_status2),
+	FUNCTION(phase_flag_status20),
+	FUNCTION(phase_flag_status21),
+	FUNCTION(phase_flag_status22),
+	FUNCTION(phase_flag_status23),
+	FUNCTION(phase_flag_status24),
+	FUNCTION(phase_flag_status25),
+	FUNCTION(phase_flag_status26),
+	FUNCTION(phase_flag_status27),
+	FUNCTION(phase_flag_status28),
+	FUNCTION(phase_flag_status29),
+	FUNCTION(phase_flag_status3),
+	FUNCTION(phase_flag_status30),
+	FUNCTION(phase_flag_status31),
+	FUNCTION(phase_flag_status4),
+	FUNCTION(phase_flag_status5),
+	FUNCTION(phase_flag_status6),
+	FUNCTION(phase_flag_status7),
+	FUNCTION(phase_flag_status8),
+	FUNCTION(phase_flag_status9),
+	FUNCTION(pll_bist_sync),
+	FUNCTION(pll_clk_aux),
+	FUNCTION(prng_rosc_test0),
+	FUNCTION(prng_rosc_test1),
+	FUNCTION(prng_rosc_test2),
+	FUNCTION(prng_rosc_test3),
+	FUNCTION(qdss_cti_trig0),
+	FUNCTION(qdss_cti_trig1),
+	FUNCTION(qdss_cti_trig2),
+	FUNCTION(qdss_cti_trig3),
+	FUNCTION(qdss_cti_trig4),
+	FUNCTION(qdss_gpio_traceclk),
+	FUNCTION(qdss_gpio_tracectl),
+	FUNCTION(qdss_gpio_tracedata0),
+	FUNCTION(qdss_gpio_tracedata1),
+	FUNCTION(qdss_gpio_tracedata10),
+	FUNCTION(qdss_gpio_tracedata11),
+	FUNCTION(qdss_gpio_tracedata12),
+	FUNCTION(qdss_gpio_tracedata13),
+	FUNCTION(qdss_gpio_tracedata14),
+	FUNCTION(qdss_gpio_tracedata15),
+	FUNCTION(qdss_gpio_tracedata2),
+	FUNCTION(qdss_gpio_tracedata3),
+	FUNCTION(qdss_gpio_tracedata4),
+	FUNCTION(qdss_gpio_tracedata5),
+	FUNCTION(qdss_gpio_tracedata6),
+	FUNCTION(qdss_gpio_tracedata7),
+	FUNCTION(qdss_gpio_tracedata8),
+	FUNCTION(qdss_gpio_tracedata9),
+	FUNCTION(qlink0_enable),
+	FUNCTION(qlink0_request),
+	FUNCTION(qlink0_wmss_reset),
+	FUNCTION(qlink1_enable),
+	FUNCTION(qlink1_request),
+	FUNCTION(qlink1_wmss_reset),
+	FUNCTION(qlink2_enable),
+	FUNCTION(qlink2_request),
+	FUNCTION(qlink2_wmss_reset),
+	FUNCTION(qlink3_enable),
+	FUNCTION(qlink3_request),
+	FUNCTION(qlink3_wmss_reset),
+	FUNCTION(qlink4_enable),
+	FUNCTION(qlink4_request),
+	FUNCTION(qlink4_wmss_reset),
+	FUNCTION(qlink5_enable),
+	FUNCTION(qlink5_request),
+	FUNCTION(qlink5_wmss_reset),
+	FUNCTION(qlink6_enable),
+	FUNCTION(qlink6_request),
+	FUNCTION(qlink6_wmss_reset),
+	FUNCTION(qlink7_enable),
+	FUNCTION(qlink7_request),
+	FUNCTION(qlink7_wmss_reset),
+	FUNCTION(qspi_clk),
+	FUNCTION(qspi_cs_n),
+	FUNCTION(qspi_data_0),
+	FUNCTION(qspi_data_1),
+	FUNCTION(qspi_data_2),
+	FUNCTION(qspi_data_3),
+	FUNCTION(qup0_se0_l0),
+	FUNCTION(qup0_se0_l1),
+	FUNCTION(qup0_se0_l2),
+	FUNCTION(qup0_se0_l3),
+	FUNCTION(qup0_se1_l0),
+	FUNCTION(qup0_se1_l1),
+	FUNCTION(qup0_se1_l2),
+	FUNCTION(qup0_se1_l3),
+	FUNCTION(qup0_se2_l0),
+	FUNCTION(qup0_se2_l1),
+	FUNCTION(qup0_se2_l2),
+	FUNCTION(qup0_se2_l3),
+	FUNCTION(qup0_se3_l0),
+	FUNCTION(qup0_se3_l1),
+	FUNCTION(qup0_se3_l2),
+	FUNCTION(qup0_se3_l3),
+	FUNCTION(qup0_se4_l0),
+	FUNCTION(qup0_se4_l1),
+	FUNCTION(qup0_se4_l2),
+	FUNCTION(qup0_se4_l3),
+	FUNCTION(qup0_se5_l0),
+	FUNCTION(qup0_se5_l1),
+	FUNCTION(qup0_se5_l2),
+	FUNCTION(qup0_se5_l3),
+	FUNCTION(qup0_se6_l0),
+	FUNCTION(qup0_se6_l1),
+	FUNCTION(qup0_se6_l2),
+	FUNCTION(qup0_se6_l3),
+	FUNCTION(qup0_se7_l0),
+	FUNCTION(qup0_se7_l1),
+	FUNCTION(qup0_se7_l2),
+	FUNCTION(qup0_se7_l3),
+	FUNCTION(qup1_se0_l0),
+	FUNCTION(qup1_se0_l1),
+	FUNCTION(qup1_se0_l2),
+	FUNCTION(qup1_se0_l3),
+	FUNCTION(qup1_se1_l0),
+	FUNCTION(qup1_se1_l1),
+	FUNCTION(qup1_se1_l2),
+	FUNCTION(qup1_se1_l3),
+	FUNCTION(qup1_se2_l0),
+	FUNCTION(qup1_se2_l1),
+	FUNCTION(qup1_se2_l2),
+	FUNCTION(qup1_se2_l3),
+	FUNCTION(qup1_se3_l0),
+	FUNCTION(qup1_se3_l1),
+	FUNCTION(qup1_se3_l2),
+	FUNCTION(qup1_se3_l3),
+	FUNCTION(qup1_se4_l0),
+	FUNCTION(qup1_se4_l1),
+	FUNCTION(qup1_se4_l2),
+	FUNCTION(qup1_se4_l3),
+	FUNCTION(qup1_se5_l0),
+	FUNCTION(qup1_se5_l1),
+	FUNCTION(qup1_se5_l2),
+	FUNCTION(qup1_se5_l3),
+	FUNCTION(qup1_se6_l0),
+	FUNCTION(qup1_se6_l1),
+	FUNCTION(qup1_se6_l2),
+	FUNCTION(qup1_se6_l3),
+	FUNCTION(qup1_se6_l4),
+	FUNCTION(qup1_se6_l5),
+	FUNCTION(qup1_se6_l6),
+	FUNCTION(qup1_se7_l0),
+	FUNCTION(qup1_se7_l1),
+	FUNCTION(qup1_se7_l2),
+	FUNCTION(qup1_se7_l3),
+	FUNCTION(qup1_se7_l4),
+	FUNCTION(qup1_se7_l5),
+	FUNCTION(qup1_se7_l6),
+	FUNCTION(qup2_se0_l0),
+	FUNCTION(qup2_se0_l1),
+	FUNCTION(qup2_se0_l2),
+	FUNCTION(qup2_se0_l3),
+	FUNCTION(qup2_se1_l0),
+	FUNCTION(qup2_se1_l1),
+	FUNCTION(qup2_se1_l2),
+	FUNCTION(qup2_se1_l3),
+	FUNCTION(qup2_se2_l0),
+	FUNCTION(qup2_se2_l1),
+	FUNCTION(qup2_se2_l2),
+	FUNCTION(qup2_se2_l3),
+	FUNCTION(smb_alert),
+	FUNCTION(smb_alert_n),
+	FUNCTION(smb_clk),
+	FUNCTION(smb_dat),
+	FUNCTION(tb_trig_sdc1),
+	FUNCTION(tgu_ch0_trigout),
+	FUNCTION(tgu_ch1_trigout),
+	FUNCTION(tgu_ch2_trigout),
+	FUNCTION(tgu_ch3_trigout),
+	FUNCTION(tgu_ch4_trigout),
+	FUNCTION(tgu_ch5_trigout),
+	FUNCTION(tgu_ch6_trigout),
+	FUNCTION(tgu_ch7_trigout),
+	FUNCTION(tmess_prng_rosc0),
+	FUNCTION(tmess_prng_rosc1),
+	FUNCTION(tmess_prng_rosc2),
+	FUNCTION(tmess_prng_rosc3),
+	FUNCTION(tod_pps_in),
+	FUNCTION(tsense_pwm1_out),
+	FUNCTION(tsense_pwm2_out),
+	FUNCTION(usb2phy_ac_en),
+	FUNCTION(usb_con_det),
+	FUNCTION(usb_dfp_en),
+	FUNCTION(usb_phy_ps),
+	FUNCTION(vfr_0),
+	FUNCTION(vfr_1),
+	FUNCTION(vsense_trigger_mirnat),
+};
+
+/* Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup qdru1000_groups[] = {
+	[0] = PINGROUP(0, qup2_se0_l0, qup2_se1_l2, ddr_bist_fail, _, _, _, _, _, _),
+	[1] = PINGROUP(1, qup2_se0_l1, qup2_se1_l3, ddr_bist_start, _, _, _, _, _, _),
+	[2] = PINGROUP(2, qup2_se1_l0, qup2_se0_l2, ddr_bist_complete, _,
+		       tsense_pwm1_out, _, _, _, _),
+	[3] = PINGROUP(3, qup2_se1_l1, qup2_se0_l3, ddr_bist_stop, _,
+		       tsense_pwm2_out, _, _, _, _),
+	[4] = PINGROUP(4, qup2_se2_l0, _, _, _, _, _, _, _, _),
+	[5] = PINGROUP(5, qup2_se2_l1, _, _, _, _, _, _, _, _),
+	[6] = PINGROUP(6, qup0_se0_l0, tgu_ch0_trigout, phase_flag_status0, _,
+		       qdss_gpio_tracedata0, _, _, _, _),
+	[7] = PINGROUP(7, qup0_se0_l1, tgu_ch1_trigout, phase_flag_status1, _,
+		       qdss_gpio_tracedata1, _, _, _, _),
+	[8] = PINGROUP(8, qup0_se0_l2, tgu_ch2_trigout, phase_flag_status2, _,
+		       qdss_gpio_tracedata2, _, _, _, _),
+	[9] = PINGROUP(9, qup0_se0_l3, tgu_ch3_trigout, phase_flag_status3, _,
+		       qdss_gpio_tracedata3, _, _, _, _),
+	[10] = PINGROUP(10, qup0_se1_l0, qup0_se2_l2, _, _, _, _, _, _, _),
+	[11] = PINGROUP(11, qup0_se1_l1, qup0_se2_l3, _, _, _, _, _, _, _),
+	[12] = PINGROUP(12, qup0_se2_l0, qup0_se1_l2, qup1_se7_l4, _, _, _, _, _, _),
+	[13] = PINGROUP(13, qup0_se2_l1, qup0_se1_l3, qup1_se7_l5, _, _, _, _, _, _),
+	[14] = PINGROUP(14, qup0_se3_l0, qup0_se4_l2, qup1_se7_l6, _, _, _, _, _, _),
+	[15] = PINGROUP(15, qup0_se3_l1, qup0_se4_l3, _, _, _, _, _, _, _),
+	[16] = PINGROUP(16, qup0_se4_l0, qup0_se3_l2, phase_flag_status4, _,
+			qdss_gpio_tracedata4, _, _, _, _),
+	[17] = PINGROUP(17, qup0_se4_l1, qup0_se3_l3, phase_flag_status5, _,
+			qdss_gpio_tracedata5, _, _, _, _),
+	[18] = PINGROUP(18, qup1_se0_l0, prng_rosc_test0, phase_flag_status6,
+			_, qdss_gpio_tracedata0, _, _, _, _),
+	[19] = PINGROUP(19, qup1_se0_l1, prng_rosc_test1, phase_flag_status7,
+			_, qdss_gpio_tracedata1, _, _, _, _),
+	[20] = PINGROUP(20, qup1_se0_l2, prng_rosc_test2, pll_bist_sync,
+			phase_flag_status8, _, qdss_gpio_tracedata2, _, _, _),
+	[21] = PINGROUP(21, qup1_se0_l3, prng_rosc_test3, phase_flag_status9,
+			_, qdss_gpio_tracedata3, _, _, _, _),
+	[22] = PINGROUP(22, qup1_se1_l0, qup1_se2_l2, phase_flag_status10, _,
+			qdss_gpio_tracedata4, _, _, _, _),
+	[23] = PINGROUP(23, qup1_se1_l1, qup1_se2_l3, phase_flag_status11, _,
+			qdss_gpio_tracedata5, _, _, _, _),
+	[24] = PINGROUP(24, qup1_se2_l0, qup1_se1_l2, phase_flag_status12, _,
+			qdss_gpio_tracedata6, _, _, _, _),
+	[25] = PINGROUP(25, qup1_se2_l1, qup1_se1_l3, phase_flag_status13, _,
+			qdss_gpio_tracedata7, _, _, _, _),
+	[26] = PINGROUP(26, qup1_se3_l0, qup1_se4_l2, intr_c_raw0,
+			phase_flag_status14, _, qdss_gpio_tracedata8, _, _, _),
+	[27] = PINGROUP(27, qup1_se3_l1, qup1_se4_l3, intr_c_raw1,
+			phase_flag_status15, _, qdss_gpio_tracedata9, _, _, _),
+	[28] = PINGROUP(28, qup1_se4_l0, qup1_se3_l2, intr_c_raw2,
+			phase_flag_status16, _, qdss_gpio_tracedata10, _, _, _),
+	[29] = PINGROUP(29, qup1_se4_l1, qup1_se3_l3, qup1_se6_l6,
+			phase_flag_status17, _, qdss_gpio_tracedata11, _, _, _),
+	[30] = PINGROUP(30, qup1_se7_l2, qup1_se5_l0, tmess_prng_rosc3,
+			phase_flag_status18, _, qdss_gpio_tracedata12, _, _, _),
+	[31] = PINGROUP(31, qup1_se7_l3, qup1_se5_l1, tmess_prng_rosc2,
+			phase_flag_status19, _, qdss_gpio_tracedata13, _, _, _),
+	[32] = PINGROUP(32, qup1_se5_l2, tmess_prng_rosc1, phase_flag_status20,
+			_, qdss_gpio_tracedata14, _, _, _, _),
+	[33] = PINGROUP(33, qup1_se5_l3, tmess_prng_rosc0, phase_flag_status21,
+			_, qdss_gpio_tracedata15, _, _, _, _),
+	[34] = PINGROUP(34, qup1_se6_l0, qdss_gpio_traceclk, _, _, _, _, _, _, _),
+	[35] = PINGROUP(35, qup1_se6_l1, qdss_gpio_tracectl, _, _, _, _, _, _, _),
+	[36] = PINGROUP(36, qup1_se6_l2, qdss_cti_trig3, _, _, _, _, _, _, _),
+	[37] = PINGROUP(37, qup1_se6_l3, qdss_cti_trig1, _, _, _, _, _, _, _),
+	[38] = PINGROUP(38, qup1_se6_l4, qdss_cti_trig4, _, _, _, _, _, _, _),
+	[39] = PINGROUP(39, qup1_se6_l5, qdss_cti_trig4, _, _, _, _, _, _, _),
+	[40] = PINGROUP(40, qup1_se7_l0, qdss_cti_trig0, _, _, _, _, _, _, _),
+	[41] = PINGROUP(41, qup1_se7_l1, qdss_cti_trig3, _, _, _, _, _, _, _),
+	[42] = PINGROUP(42, usb_con_det, phase_flag_status22, _,
+			qdss_gpio_tracedata6, _, _, _, _, _),
+	[43] = PINGROUP(43, usb_dfp_en, phase_flag_status23, _,
+			qdss_gpio_tracedata7, _, _, _, _, _),
+	[44] = PINGROUP(44, SI5518_INT, tgu_ch4_trigout, _, _, _, _, _, _, _),
+	[45] = PINGROUP(45, tgu_ch5_trigout, _, _, _, _, _, _, _, _),
+	[46] = PINGROUP(46, tgu_ch6_trigout, _, _, _, _, _, _, _, _),
+	[47] = PINGROUP(47, hardsync_pps_in, tgu_ch7_trigout, _, _, _, _, _, _, _),
+	[48] = PINGROUP(48, tod_pps_in, qdss_cti_trig0, _, _, _, _, _, _, _),
+	[49] = PINGROUP(49, gps_pps_in, qdss_cti_trig1, _, _, _, _, _, _, _),
+	[50] = PINGROUP(50, _, _, _, _, _, _, _, _, _),
+	[51] = PINGROUP(51, _, _, _, _, _, _, _, _, _),
+	[52] = PINGROUP(52, _, _, _, _, _, _, _, _, _),
+	[53] = PINGROUP(53, _, _, _, _, _, _, _, _, _),
+	[54] = PINGROUP(54, _, _, _, _, _, _, _, _, _),
+	[55] = PINGROUP(55, _, _, _, _, _, _, _, _, _),
+	[56] = PINGROUP(56, _, qlink6_wmss_reset, _, _, _, _, _, _, _),
+	[57] = PINGROUP(57, _, qlink7_wmss_reset, _, _, _, _, _, _, _),
+	[58] = PINGROUP(58, _, _, _, _, _, _, _, _, _),
+	[59] = PINGROUP(59, _, _, _, _, _, _, _, _, _),
+	[60] = PINGROUP(60, _, _, _, _, _, _, _, _, _),
+	[61] = PINGROUP(61, _, _, _, _, _, _, _, _, _),
+	[62] = PINGROUP(62, _, _, _, _, _, _, _, _, _),
+	[63] = PINGROUP(63, _, _, _, _, _, _, _, _, _),
+	[64] = PINGROUP(64, _, _, _, _, _, _, _, _, _),
+	[65] = PINGROUP(65, _, _, _, _, _, _, _, _, _),
+	[66] = PINGROUP(66, qlink0_request, _, _, _, _, _, _, _, _),
+	[67] = PINGROUP(67, qlink0_enable, _, _, _, _, _, _, _, _),
+	[68] = PINGROUP(68, qlink1_request, _, _, _, _, _, _, _, _),
+	[69] = PINGROUP(69, qlink1_enable, _, _, _, _, _, _, _, _),
+	[70] = PINGROUP(70, qlink2_request, _, _, _, _, _, _, _, _),
+	[71] = PINGROUP(71, qlink2_enable, _, _, _, _, _, _, _, _),
+	[72] = PINGROUP(72, qlink3_request, _, _, _, _, _, _, _, _),
+	[73] = PINGROUP(73, qlink3_enable, _, _, _, _, _, _, _, _),
+	[74] = PINGROUP(74, qlink4_request, _, _, _, _, _, _, _, _),
+	[75] = PINGROUP(75, qlink4_enable, _, _, _, _, _, _, _, _),
+	[76] = PINGROUP(76, qlink5_request, _, _, _, _, _, _, _, _),
+	[77] = PINGROUP(77, qlink5_enable, _, _, _, _, _, _, _, _),
+	[78] = PINGROUP(78, qlink6_request, _, _, _, _, _, _, _, _),
+	[79] = PINGROUP(79, qlink6_enable, _, _, _, _, _, _, _, _),
+	[80] = PINGROUP(80, qlink7_request, _, _, _, _, _, _, _, _),
+	[81] = PINGROUP(81, qlink7_enable, _, _, _, _, _, _, _, _),
+	[82] = PINGROUP(82, qlink0_wmss_reset, _, _, _, _, _, _, _, _),
+	[83] = PINGROUP(83, qlink1_wmss_reset, _, _, _, _, _, _, _, _),
+	[84] = PINGROUP(84, qlink4_wmss_reset, _, _, _, _, _, _, _, _),
+	[85] = PINGROUP(85, qlink5_wmss_reset, _, _, _, _, _, _, _, _),
+	[86] = PINGROUP(86, eth012_int_n, gcc_gp1_clk, _, qdss_cti_trig0, _, _, _, _, _),
+	[87] = PINGROUP(87, eth345_int_n, gcc_gp2_clk, _, qdss_cti_trig1, _, _, _, _, _),
+	[88] = PINGROUP(88, eth6_int_n, smb_alert_n, gcc_gp3_clk, _,
+			qdss_gpio_traceclk, _, _, _, _),
+	[89] = PINGROUP(89, phase_flag_status24, cmu_rng_entropy3, _,
+			qdss_gpio_tracedata8, atest_char_status3, _, _, _, _),
+	[90] = PINGROUP(90, usb2phy_ac_en, phase_flag_status25,
+			cmu_rng_entropy2, _, qdss_gpio_tracedata9,
+			atest_char_status2, _, _, _),
+	[91] = PINGROUP(91, usb_phy_ps, phase_flag_status26, cmu_rng_entropy1,
+			_, qdss_gpio_tracedata10, atest_char_status1, _, _, _),
+	[92] = PINGROUP(92, phase_flag_status27, cmu_rng_entropy0, _,
+			qdss_gpio_tracedata11, atest_char_status0, _, _, _, _),
+	[93] = PINGROUP(93, vfr_0, qdss_cti_trig0, _, _, _, _, _, _, _),
+	[94] = PINGROUP(94, vfr_1, qdss_cti_trig1, _, _, _, _, _, _, _),
+	[95] = PINGROUP(95, phase_flag_status28, _, qdss_gpio_tracedata12,
+			atest_char_start, _, _, _, _, _),
+	[96] = PINGROUP(96, phase_flag_status29, _, qdss_gpio_tracedata13, _, _, _, _, _, _),
+	[97] = PINGROUP(97, phase_flag_status30, _, qdss_gpio_tracedata14, _, _, _, _, _, _),
+	[98] = PINGROUP(98, pll_clk_aux, _, _, _, _, _, _, _, _),
+	[99] = PINGROUP(99, pcie0_clkreqn, char_exec_pending, _, _, _, _, _, _, _),
+	[100] = PINGROUP(100, char_exec_release, _, _, _, _, _, _, _, _),
+	[101] = PINGROUP(101, smb_alert, _, _, _, _, _, _, _, _),
+	[102] = PINGROUP(102, phase_flag_status31, _, qdss_gpio_tracedata15, _, _, _, _, _, _),
+	[103] = PINGROUP(103, CMO_PRI, qdss_gpio_tracectl, _, _, _, _, _, _, _),
+	[104] = PINGROUP(104, _, _, _, _, _, _, _, _, _),
+	[105] = PINGROUP(105, _, _, _, _, _, _, _, _, _),
+	[106] = PINGROUP(106, _, _, _, _, _, _, _, _, _),
+	[107] = PINGROUP(107, _, _, _, _, _, _, _, _, _),
+	[108] = PINGROUP(108, _, _, _, _, _, _, _, _, _),
+	[109] = PINGROUP(109, _, _, _, _, _, _, _, _, _),
+	[110] = PINGROUP(110, _, _, _, _, _, _, _, _, _),
+	[111] = PINGROUP(111, _, _, _, _, _, _, _, _, _),
+	[112] = PINGROUP(112, _, _, _, _, _, _, _, _, _),
+	[113] = PINGROUP(113, _, _, _, _, _, _, _, _, _),
+	[114] = PINGROUP(114, qspi_data_0, tb_trig_sdc1, _,
+			 atest_usb0_atereset, ddr_pxi0_test, _, _, _, _),
+	[115] = PINGROUP(115, qspi_data_1, _, atest_usb0_testdataout00,
+			 ddr_pxi0_test, _, _, _, _, _),
+	[116] = PINGROUP(116, qspi_data_2, _, atest_usb0_testdataout01,
+			 ddr_pxi1_test, _, _, _, _, _),
+	[117] = PINGROUP(117, qspi_data_3, _, atest_usb0_testdataout02,
+			 ddr_pxi1_test, _, _, _, _, _),
+	[118] = PINGROUP(118, _, atest_usb0_testdataout03, ddr_pxi2_test, _, _, _, _, _, _),
+	[119] = PINGROUP(119, _, _, ddr_pxi2_test, _, _, _, _, _, _),
+	[120] = PINGROUP(120, _, _, ddr_pxi3_test, _, _, _, _, _, _),
+	[121] = PINGROUP(121, _, ddr_pxi3_test, _, _, _, _, _, _, _),
+	[122] = PINGROUP(122, _, ddr_pxi4_test, _, _, _, _, _, _, _),
+	[123] = PINGROUP(123, _, ddr_pxi4_test, _, _, _, _, _, _, _),
+	[124] = PINGROUP(124, _, ddr_pxi5_test, _, _, _, _, _, _, _),
+	[125] = PINGROUP(125, qspi_cs_n, _, ddr_pxi5_test, _, _, _, _, _, _),
+	[126] = PINGROUP(126, qspi_clk, _, ddr_pxi6_test, _, _, _, _, _, _),
+	[127] = PINGROUP(127, _, ddr_pxi6_test, _, _, _, _, _, _, _),
+	[128] = PINGROUP(128, qup2_se2_l2, _, ddr_pxi7_test, _, _, _, _, _, _),
+	[129] = PINGROUP(129, qup2_se2_l3, ddr_pxi7_test, _, _, _, _, _, _, _),
+	[130] = PINGROUP(130, qup0_se5_l0, qup0_se6_l2, jitter_bist_ref,
+			 qdss_cti_trig2, _, _, _, _, _),
+	[131] = PINGROUP(131, qup0_se5_l1, qup0_se6_l3, qdss_cti_trig2, _, _, _, _, _, _),
+	[132] = PINGROUP(132, qup0_se6_l0, qup0_se5_l2, smb_dat,
+			 qdss_cti_trig2, _, _, _, _, _),
+	[133] = PINGROUP(133, qup0_se6_l1, qup0_se5_l3, smb_clk,
+			 qdss_cti_trig3, _, _, _, _, _),
+	[134] = PINGROUP(134, qup0_se7_l0, qup0_se7_l2, gcc_gp1_clk, _,
+			 qdss_cti_trig3, _, _, _, _),
+	[135] = PINGROUP(135, qup0_se7_l1, qup0_se7_l3, gcc_gp2_clk, _,
+			 qdss_cti_trig2, vsense_trigger_mirnat, _, _, _),
+	[136] = PINGROUP(136, gcc_gp3_clk, dbg_out_clk, _, _, _, _, _, _, _),
+	[137] = PINGROUP(137, _, _, _, _, _, _, _, _, _),
+	[138] = PINGROUP(138, qlink2_wmss_reset, _, _, _, _, _, _, _, _),
+	[139] = PINGROUP(139, qlink3_wmss_reset, _, _, _, _, _, _, _, _),
+	[140] = PINGROUP(140, _, _, _, _, _, _, _, _, _),
+	[141] = PINGROUP(141, intr_c_raw0, _, _, _, _, _, _, _, _),
+	[142] = PINGROUP(142, intr_c_raw1, _, _, _, _, _, _, _, _),
+	[143] = PINGROUP(143, intr_c_raw2, _, _, _, _, _, _, _, _),
+	[144] = PINGROUP(144, qdss_cti_trig4, _, _, _, _, _, _, _, _),
+	[145] = PINGROUP(145, qdss_cti_trig4, _, _, _, _, _, _, _, _),
+	[146] = PINGROUP(146, _, _, _, _, _, _, _, _, _),
+	[147] = PINGROUP(147, _, _, _, _, _, _, _, _, _),
+	[148] = PINGROUP(148, _, _, _, _, _, _, _, _, _),
+	[149] = PINGROUP(149, _, _, _, _, _, _, _, _, _),
+	[150] = PINGROUP(150, _, _, _, _, _, _, _, _, _),
+	[151] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x9e000, 0, 0),
+	[152] = SDC_QDSD_PINGROUP(sdc1_clk, 0x9d000, 13, 6),
+	[153] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x9d000, 11, 3),
+	[154] = SDC_QDSD_PINGROUP(sdc1_data, 0x9d000, 9, 0),
+};