diff mbox series

[3/3] arm64: dts: rockchip: Add devicetree for Odroid Go Advance Black Edition

Message ID 20221006174519.46161-3-maccraft123mc@gmail.com
State New
Headers show
Series None | expand

Commit Message

Maya Matuszczyk Oct. 6, 2022, 5:45 p.m. UTC 
This device is a revision of Odroid Go Advance, with added wifi card on
sdio interface and two trigger buttons.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3326-odroid-go2-v11.dts    | 104 ++++++++++++++++++
 2 files changed, 105 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index ef79a672804a..9fdbe7e83fc8 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -8,6 +8,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
new file mode 100644
index 000000000000..da48d070d9af
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts
@@ -0,0 +1,104 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Advance Black Edition";
+	compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
+
+	aliases {
+		mmc1 = &sdio;
+	};
+
+	gpio-keys {
+		button-sw20 {
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "TOP-LEFT 2";
+			linux,code = <BTN_TL2>;
+		};
+		button-sw21 {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "TOP-RIGHT 2";
+			linux,code = <BTN_TR2>;
+		};
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwrseq_pins>;
+		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&rk817 {
+	regulators {
+		vcc_wifi: LDO_REG9 {
+			regulator-name = "vcc_wifi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+
+			regulator-state-mem {
+				regulator-on-in-suspend;
+				regulator-suspend-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&vcc_wifi>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	esp8089: wifi@1 {
+		compatible = "esp,esp8089";
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wifi {
+		wifi_pwrseq_pins: wifi-pwrseq-pins {
+			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>;
+		};
+	};
+};