diff mbox

[17/21] FADT: enhance compliance tests for GPE blocks

Message ID 1454981583-31872-18-git-send-email-al.stone@linaro.org
State Superseded
Headers show

Commit Message

Al Stone Feb. 9, 2016, 1:32 a.m. UTC 
Other parts of the FADT tests check for proper operation of some of the
address fields, like the PM or GPE blocks.  The original GPE test was
rewritten here to check the fields in more detail.

Signed-off-by: Al Stone <al.stone@linaro.org>

---
 src/acpi/fadt/fadt.c | 97 ++++++++++++++++++++++++++++++++--------------------
 1 file changed, 60 insertions(+), 37 deletions(-)

-- 
2.5.0
diff mbox

Patch

diff --git a/src/acpi/fadt/fadt.c b/src/acpi/fadt/fadt.c
index 3b5547f..b349954 100644
--- a/src/acpi/fadt/fadt.c
+++ b/src/acpi/fadt/fadt.c
@@ -1227,50 +1227,72 @@  static void acpi_table_check_fadt_pm_tmr_len(fwts_framework *fw)
 	}
 }
 
-static void acpi_table_check_fadt_gpe(
-	fwts_framework *fw,
-	const fwts_acpi_table_fadt *fadt,
-	bool *passed)
+static void acpi_table_check_fadt_gpe0_blk_len(fwts_framework *fw)
 {
-	if (fwts_acpi_is_reduced_hardware(fadt)) {
-		if (fadt->gpe0_blk_len != 0) {
-			fwts_warning(fw, "FADT GPE0_BLK_LEN is not zero "
-				"but should be in reduced hardware mode.");
-		}
-		if (fadt->gpe1_blk_len != 0) {
-			fwts_warning(fw, "FADT GPE1_BLK_LEN is not zero but "
-				"should be in reduced hardware mode.");
-		}
-		return;
-	}
-
 	if (fadt->gpe0_blk_len & 1) {
-		*passed = false;
 		fwts_failed(fw, LOG_LEVEL_MEDIUM,
-			"FADTBadGPEBLKLEN",
-			"FADT GPE0_BLK_LEN is %" PRIu8
-			", should a multiple of 2.",
-			fadt->gpe0_blk_len);
+			    "FADTBadGPE0BLKLEN",
+			    "FADT GPE0_BLK_LEN is %" PRIu8
+			    ", should a multiple of 2.",
+			    fadt->gpe0_blk_len);
 		fwts_advice(fw,
-			"The FADT GPE_BLK_LEN should be a multiple of 2. "
-			"Because it isn't, the ACPI driver will not map in "
-			"the GPE0 region. This could mean that General "
-			"Purpose Events will not function correctly (for "
-			"example lid or ac-power events).");
+			    "The FADT GPE0_BLK_LEN should be a multiple of 2. "
+			    "Because it isn't, the ACPI driver will not map in "
+			    "the GPE0 region. This could mean that General "
+			    "Purpose Events will not function correctly (for "
+			    "example lid or AC-power events).");
+	} else {
+		if (fadt->gpe0_blk_len)
+			fwts_passed(fw, "FADT GPE0_BLK_LEN non-zero and a "
+				    "non-negative multiple of 2: %" PRIu8 ".",
+				    fadt->gpe0_blk_len);
+		else
+			fwts_failed(fw, LOG_LEVEL_MEDIUM,
+				    "FADTZeroGPE0BlkLen",
+				    "FADT GPE0_BLK_LEN is zero, but must be "
+				    "set to a non-negative multiple of 2.");
+
+	}
+}
+
+static void acpi_table_check_fadt_gpe1_blk_len(fwts_framework *fw)
+{
+	if (fadt->gpe1_blk_len == 0) {
+		if (fadt->gpe1_blk == 0)
+			fwts_passed(fw, "FADT GPE1_BLK_LEN is zero and "
+				    "GPE1_BLK is not supported.");
+		else
+			fwts_failed(fw, LOG_LEVEL_MEDIUM,
+				    "FADTGPE1BlkLenInconsistent",
+				    "FADT GPE1_BLK_LEN must be zero because "
+				    "GPE1_BLK is not supported, but is %d.",
+				    fadt->gpe1_blk_len);
+		return;
 	}
+
 	if (fadt->gpe1_blk_len & 1) {
-		*passed = false;
 		fwts_failed(fw, LOG_LEVEL_MEDIUM,
-			"FADTBadGPE1BLKLEN",
-			"FADT GPE1_BLK_LEN is %" PRIu8
-			", should a multiple of 2.",
-			fadt->gpe1_blk_len);
+			    "FADTBadGPE1BLKLEN",
+			    "FADT GPE1_BLK_LEN is %" PRIu8
+			    ", should a multiple of 2.",
+			    fadt->gpe1_blk_len);
 		fwts_advice(fw,
-			"The FADT GPE1_BLK_LEN should be a multiple of 2. "
-			"Because it isn't, the ACPI driver will not map in "
-			"the GPE1 region. This could mean that General "
-			"Purpose Events will not function correctly (for "
-			"example lid or ac-power events).");
+			    "The FADT GPE1_BLK_LEN should be a multiple of 2. "
+			    "Because it isn't, the ACPI driver will not map in "
+			    "the GPE1 region. This could mean that General "
+			    "Purpose Events will not function correctly (for "
+			    "example lid or AC-power events).");
+	} else {
+		if (fadt->gpe1_blk_len)
+			fwts_passed(fw, "FADT GPE1_BLK_LEN non-zero and a "
+				    "non-negative multiple of 2: %" PRIu8 ".",
+				    fadt->gpe1_blk_len);
+		else
+			fwts_failed(fw, LOG_LEVEL_MEDIUM,
+				    "FADTZeroGPE1BlkLen",
+				    "FADT GPE1_BLK_LEN is zero, but must be "
+				    "set to a non-negative multiple of 2.");
+
 	}
 }
 
@@ -1308,7 +1330,8 @@  static int fadt_test1(fwts_framework *fw)
 		acpi_table_check_fadt_pm1_cnt_len(fw);
 		acpi_table_check_fadt_pm2_cnt_len(fw);
 		acpi_table_check_fadt_pm_tmr_len(fw);
-		acpi_table_check_fadt_gpe(fw, fadt, &passed);
+		acpi_table_check_fadt_gpe0_blk_len(fw);
+		acpi_table_check_fadt_gpe1_blk_len(fw);
 		fwts_log_info(fw, "FADT GPE1_BASE is %" PRIu8, fadt->gpe1_base);
 
 		fwts_log_info(fw, "FADT FLUSH_SIZE is %" PRIu16,