diff mbox series

[v2,2/2] Revert "dt-bindings: pinctrl-zynqmp: Add output-enable configuration"

Message ID 20221017130303.21746-3-sai.krishna.potthuri@amd.com
State Superseded
Headers show
Series [v2,1/2] Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and bias-high-impedance" | expand

Commit Message

Sai Krishna Potthuri Oct. 17, 2022, 1:03 p.m. UTC
This reverts commit 133ad0d9af99bdca90705dadd8d31c20bfc9919f.

On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware)
using these pinctrl properties can cause system hang because there is
missing feature autodetection.
When this feature is implemented, support for these two properties should
bring back.

Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
---
 .../devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml      | 4 ----
 1 file changed, 4 deletions(-)

Comments

Rob Herring Oct. 21, 2022, 1:11 a.m. UTC | #1
On Mon, Oct 17, 2022 at 06:33:03PM +0530, Sai Krishna Potthuri wrote:
> This reverts commit 133ad0d9af99bdca90705dadd8d31c20bfc9919f.
> 
> On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware)
> using these pinctrl properties can cause system hang because there is
> missing feature autodetection.
> When this feature is implemented, support for these two properties should
> bring back.

So I'm going to get to review the revert of the revert at some point? 
Why do the properties need to be removed from the binding? They work on 
'not older' firmware, right? Isn't just removing the driver support or 
removing from .dts files enough?

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
index 1e2b9b627b12..2722dc7bb03d 100644
--- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -274,10 +274,6 @@  patternProperties:
           slew-rate:
             enum: [0, 1]
 
-          output-enable:
-            description:
-              This will internally disable the tri-state for MIO pins.
-
           drive-strength:
             description:
               Selects the drive strength for MIO pins, in mA.