@@ -1026,8 +1026,13 @@ static blk_status_t sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
/* flush requests don't perform I/O, zero the S/G table */
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
- cmd->cmnd[0] = SYNCHRONIZE_CACHE;
- cmd->cmd_len = 10;
+ if (cmd->device->use_16_for_sync) {
+ cmd->cmnd[0] = SYNCHRONIZE_CACHE_16;
+ cmd->cmd_len = 16;
+ } else {
+ cmd->cmnd[0] = SYNCHRONIZE_CACHE;
+ cmd->cmd_len = 10;
+ }
cmd->transfersize = 0;
cmd->allowed = sdkp->max_retries;
@@ -1587,9 +1592,12 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
sshdr = &my_sshdr;
for (retries = 3; retries > 0; --retries) {
- unsigned char cmd[10] = { 0 };
+ unsigned char cmd[16] = { 0 };
- cmd[0] = SYNCHRONIZE_CACHE;
+ if (sdp->use_16_for_sync)
+ cmd[0] = SYNCHRONIZE_CACHE_16;
+ else
+ cmd[0] = SYNCHRONIZE_CACHE;
/*
* Leave the rest of the command zero to indicate
* flush everything.
@@ -921,9 +921,10 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, u8 buf[SD_BUF_SIZE])
return 0;
}
- /* READ16/WRITE16 is mandatory for ZBC disks */
+ /* READ16/WRITE16/SYNC16 is mandatory for ZBC devices */
sdkp->device->use_16_for_rw = 1;
sdkp->device->use_10_for_rw = 0;
+ sdkp->device->use_16_for_sync = 1;
if (!blk_queue_is_zoned(q)) {
/*
@@ -184,6 +184,7 @@ struct scsi_device {
unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */
unsigned no_write_same:1; /* no WRITE SAME command */
unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
+ unsigned use_16_for_sync:1; /* Use sync (16) over sync (10) */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
unsigned skip_vpd_pages:1; /* do not read VPD pages */
ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE (16) for host-managed zoned block devices, but does not mandate SYNCHRONIZE CACHE (10). Call SYNCHRONIZE CACHE (16) in place of SYNCHRONIZE CACHE (10) to ensure that the command is always supported. For this purpose, add use_16_for_sync flag to struct scsi_device in same manner as use_16_for_rw flag. To be precise, ZBC does not mandate READ(16), WRITE (16) and SYNCHRONIZE CACHE (16) commands for host-aware zoned block devices. However, modern devices should support the 16 byte commands. Hence, enforce the 16 byte commands on both types of ZBC devices, host-aware and host-managed. Of note is that this patch depends on the libata-scsi fix [1], and should be merged to upstream after it. [1] https://lore.kernel.org/linux-ide/20221107040229.1548793-1-shinichiro.kawasaki@wdc.com/ Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> --- Changes from v1: * Dropped the first patch to relax check on host-aware devices * Enforce SYNC 16 command on both host-aware and host-managed devices drivers/scsi/sd.c | 16 ++++++++++++---- drivers/scsi/sd_zbc.c | 3 ++- include/scsi/scsi_device.h | 1 + 3 files changed, 15 insertions(+), 5 deletions(-)