| Message ID | 1456245445-31824-9-git-send-email-rogerq@ti.com |
|---|---|
| State | New |
| Headers | show |
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 0cb1003..f50348b 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -111,12 +111,9 @@ gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; - gpmc,wait-on-read = "true"; - gpmc,wait-on-write = "true"; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; - gpmc,wait-monitoring-ns = <0>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; partition@0 {
The NAND Ready/Busy# line is connected to GPMC_WAIT0 pin and can't be used for wait state insertion for NAND I/O read/write. So disable read/write wait monitoring as per Reference Manual's suggestion [1]. [1] dm816x TRM: SPRUGX8C: 9.2.4.12.2 NAND Device-Ready Pin Signed-off-by: Roger Quadros <rogerq@ti.com> --- arch/arm/boot/dts/dm8168-evm.dts | 3 --- 1 file changed, 3 deletions(-) -- 2.5.0