@@ -537,7 +537,9 @@ dtb-$(CONFIG_ARCH_REALVIEW) += \
arm-realview-eb.dtb \
arm-realview-eb-11mp.dtb \
arm-realview-eb-11mp-revb.dtb \
- arm-realview-eb-a9mp.dtb
+ arm-realview-eb-a9mp.dtb \
+ arm-realview-pba8.dtb \
+ arm-realview-pbx-a9.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3036-evb.dtb \
rk3036-kylin.dtb \
new file mode 100644
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+ model = "ARM RealView Platform Baseboard for Cortex-A8";
+ compatible = "arm,realview-pba8";
+ arm,hbi = <0x178>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a8";
+ reg = <0>;
+ };
+ };
+
+ pmu: pmu@0 {
+ compatible = "arm,cortex-a8-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>;
+ };
+
+ /* Primary GIC PL390 interrupt controller in the test chip */
+ intc: interrupt-controller@1e000000 {
+ compatible = "arm,pl390";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1e001000 0x1000>,
+ <0x1e000000 0x100>;
+ };
+};
+
+ðernet {
+ interrupt-parent = <&intc>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+ interrupt-parent = <&intc>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&soc {
+ compatible = "arm,realview-pba8-soc", "simple-bus";
+};
+
+&syscon {
+ compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
+};
+
+&serial0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+ interrupt-parent = <&intc>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+ interrupt-parent = <&intc>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
new file mode 100644
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+ /*
+ * This is the RealView Platform Baseboard Explore for Cortex-A9
+ * (HBI0182 + HBI0183) as described in ARM DUI 0440B
+ */
+ model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
+ arm,hbi = <0x182>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "arm,realview-smp";
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ };
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x1f002000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ /*
+ * Override default cache size, sets and
+ * associativity as these may be erroneously set
+ * up by boot loader(s).
+ */
+ cache-size = <1048576>; // 1MB
+ cache-sets = <4096>;
+ cache-line-size = <32>;
+ arm,parity-disable;
+ arm,tag-latency = <1>;
+ arm,data-latency = <1 1>;
+ arm,dirty-latency = <1>;
+ };
+
+ scu: scu@1f000000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x1f000000 0x100>;
+ };
+
+ twd_timer: timer@1f000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0x1f000600 0x20>;
+ interrupt-parent = <&intc>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ twd_wdog: watchdog@1f000620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0x1f000620 0x20>;
+ interrupt-parent = <&intc>;
+ interrupts = <1 14 0xf04>;
+ };
+
+ pmu: pmu@0 {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&intc>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&CPU0>, <&CPU1>;
+ };
+
+ /* Primary GIC PL390 interrupt controller in the test chip */
+ intc: interrupt-controller@1f000000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x1f001000 0x1000>,
+ <0x1f000100 0x100>;
+ };
+};
+
+ðernet {
+ interrupt-parent = <&intc>;
+ interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+ interrupt-parent = <&intc>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+ interrupt-parent = <&intc>;
+ interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+ interrupt-parent = <&intc>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+ interrupt-parent = <&intc>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+ interrupt-parent = <&intc>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+ interrupt-parent = <&intc>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
new file mode 100644
@@ -0,0 +1,542 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "arm,realview-pbx";
+
+ chosen { };
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ i2c0 = &i2c;
+ };
+
+ memory {
+ /* 128 MiB memory @ 0x0 */
+ reg = <0x00000000 0x08000000>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ veth: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "veth";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ refclk32khz: refclk32khz {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ wdogclk: wdogclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ flash0@40000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x40000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ flash1@44000000 {
+ /* 2 * 32MiB NOR Flash memory */
+ compatible = "arm,versatile-flash", "cfi-flash";
+ reg = <0x44000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ /* SMSC 9118 ethernet with PHY and EEPROM */
+ ethernet: ethernet@4e000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <0x4e000000 0x10000>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vdd33a-supply = <&veth>;
+ vddvario-supply = <&veth>;
+ };
+
+ usb: usb@4f000000 {
+ compatible = "nxp,usb-isp1761";
+ reg = <0x4f000000 0x20000>;
+ port1-otg;
+ };
+
+ soc: soc@0 {
+ compatible = "arm,realview-pbx-soc", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ regmap = <&syscon>;
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0C>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk1: osc1@10 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x10>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk2: osc2@14 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x14>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk3: osc3@18 {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x18>;
+ clocks = <&xtal24mhz>;
+ };
+ oscclk4: osc4@1c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x1c>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
+ sp810_syscon0: sysctl@10001000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x10001000 0x1000>;
+ clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclk0",
+ "timerclk1",
+ "timerclk2",
+ "timerclk3";
+ assigned-clocks = <&sp810_syscon0 0>,
+ <&sp810_syscon0 1>,
+ <&sp810_syscon0 2>,
+ <&sp810_syscon0 3>;
+ assigned-clock-parents = <&timclk>,
+ <&timclk>,
+ <&timclk>,
+ <&timclk>;
+ };
+
+ i2c: i2c@10002000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "arm,versatile-i2c";
+ reg = <0x10002000 0x1000>;
+
+ rtc@68 {
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+ };
+
+ serial0: serial@10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial1: serial@1000a000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000a000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ serial2: serial@1000b000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000b000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ ssp: ssp@1000d000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1000d000 0x1000>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ wdog0: watchdog@1000f000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x1000f000 0x1000>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ wdog1: watchdog@10010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x10010000 0x1000>;
+ clocks = <&wdogclk>, <&pclk>;
+ clock-names = "wdogclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ timer01: timer@10011000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10011000 0x1000>;
+ clocks = <&sp810_syscon0 0>,
+ <&sp810_syscon0 1>,
+ <&pclk>;
+ clock-names = "timerclk0",
+ "timerclk1",
+ "apb_pclk";
+ };
+
+ timer23: timer@10012000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10012000 0x1000>;
+ clocks = <&sp810_syscon0 2>,
+ <&sp810_syscon0 3>,
+ <&pclk>;
+ clock-names = "timerclk2",
+ "timerclk3",
+ "apb_pclk";
+ };
+
+ gpio0: gpio@10013000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10013000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio@10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ /* DVI serial bus control is at 10016000 */
+
+ rtc: rtc@10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ timer45: timer@10018000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10018000 0x1000>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timerclk4", "timerclk5", "apb_pclk";
+ };
+
+ timer67: timer@10019000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10019000 0x1000>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timerclk6", "timerclk7", "apb_pclk";
+ };
+
+ sp810_syscon1: sysctl@1001a000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x1001a000 0x1000>;
+ clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclk4",
+ "timerclk5",
+ "timerclk6",
+ "timerclk7";
+ assigned-clocks = <&sp810_syscon1 0>,
+ <&sp810_syscon1 1>,
+ <&sp810_syscon1 2>,
+ <&sp810_syscon1 3>;
+ assigned-clock-parents = <&timclk>,
+ <&timclk>,
+ <&timclk>,
+ <&timclk>;
+ };
+ };
+
+
+ /* These peripherals are inside the FPGA */
+ fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ aaci: aaci@10004000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x10004000 0x1000>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ mmc: mmcsd@10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ kmi0: kmi@10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi1: kmi@10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ serial3: serial@1000c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1000c000 0x1000>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+
+ /* These peripherals are inside the NEC ISSP */
+ issp {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ clcd: clcd@10020000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x10020000 0x1000>;
+ interrupt-names = "combined";
+ clocks = <&oscclk4>, <&pclk>;
+ clock-names = "clcdclk", "apb_pclk";
+
+ port {
+ clcd_pads: endpoint {
+ remote-endpoint = <&clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ clcd_panel: endpoint {
+ remote-endpoint = <&clcd_pads>;
+ };
+ };
+
+ /* Standard 640x480 VGA timings */
+ panel-timing {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ hback-porch = <48>;
+ hfront-porch = <16>;
+ hsync-len = <96>;
+ vactive = <480>;
+ vback-porch = <33>;
+ vfront-porch = <10>;
+ vsync-len = <2>;
+ };
+ };
+ };
+ };
+};
+
This adds a devicetree for the ARM RealView PBA8 platform, also known as HBI-0178, "RealView Platform Baseboard for Cortex-A8" and PBX-A9 "RealView Platform Baseboard Explore for Cortex-A9" Tested in QEMU with -M realview-pb-a8, as well as with -M realview-pbx-a9 -smp cpus=2 Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Realized that the PBA8 and the PBX-A9 is very similar so merged these machines into one patch sharing a common PBX .dtsi file and enabled PBX-A9 as well. - Fixed the assignment of the SD/MMC card detect to route to gpio instance 2. - Drop QEMU sob story from commit message. --- arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/arm-realview-pba8.dts | 178 ++++++++++ arch/arm/boot/dts/arm-realview-pbx-a9.dts | 229 +++++++++++++ arch/arm/boot/dts/arm-realview-pbx.dtsi | 542 ++++++++++++++++++++++++++++++ 4 files changed, 952 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/arm-realview-pba8.dts create mode 100644 arch/arm/boot/dts/arm-realview-pbx-a9.dts create mode 100644 arch/arm/boot/dts/arm-realview-pbx.dtsi -- 2.4.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel