@@ -20322,6 +20322,7 @@ L: linux-tegra@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
+F: drivers/staging/media/tegra-video/tegra20.c
F: drivers/staging/media/tegra-video/vip.*
TEGRA XUSB PADCTL DRIVER
@@ -5,5 +5,6 @@ tegra-video-objs := \
vip.o \
csi.o
+tegra-video-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20.o
tegra-video-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210.o
obj-$(CONFIG_VIDEO_TEGRA) += tegra-video.o
new file mode 100644
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Tegra20-specific VI implementation
+ *
+ * Copyright (C) 2022 SKIDATA GmbH
+ * Author: Luca Ceresoli <luca.ceresoli@bootlin.com>
+ */
+
+/*
+ * This source file contains Tegra20 supported video formats,
+ * VI and VIP SoC specific data, operations and registers accessors.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/host1x.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/v4l2-mediabus.h>
+
+#include "vip.h"
+#include "vi.h"
+
+#define TEGRA_VI_SYNCPT_WAIT_TIMEOUT msecs_to_jiffies(200)
+
+/* This are just good-sense numbers. The actual min/max is not documented. */
+#define TEGRA20_MIN_WIDTH 32U
+#define TEGRA20_MIN_HEIGHT 32U
+#define TEGRA20_MAX_WIDTH 2048U
+#define TEGRA20_MAX_HEIGHT 2048U
+
+/* --------------------------------------------------------------------------
+ * Registers
+ */
+
+#define TEGRA_VI_CONT_SYNCPT_OUT_1 0x0060
+#define VI_CONT_SYNCPT_OUT_1_CONTINUOUS_SYNCPT BIT(8)
+#define VI_CONT_SYNCPT_OUT_1_SYNCPT_IDX_SFT 0
+
+#define TEGRA_VI_VI_INPUT_CONTROL 0x0088
+#define VI_INPUT_FIELD_DETECT BIT(27)
+#define VI_INPUT_BT656 BIT(25)
+#define VI_INPUT_YUV_INPUT_FORMAT_SFT 8 /* bits [9:8] */
+#define VI_INPUT_YUV_INPUT_FORMAT_UYVY (0 << VI_INPUT_YUV_INPUT_FORMAT_SFT)
+#define VI_INPUT_YUV_INPUT_FORMAT_VYUY (1 << VI_INPUT_YUV_INPUT_FORMAT_SFT)
+#define VI_INPUT_YUV_INPUT_FORMAT_YUYV (2 << VI_INPUT_YUV_INPUT_FORMAT_SFT)
+#define VI_INPUT_YUV_INPUT_FORMAT_YVYU (3 << VI_INPUT_YUV_INPUT_FORMAT_SFT)
+#define VI_INPUT_INPUT_FORMAT_SFT 2 /* bits [5:2] */
+#define VI_INPUT_INPUT_FORMAT_YUV422 (0 << VI_INPUT_INPUT_FORMAT_SFT)
+#define VI_INPUT_VIP_INPUT_ENABLE BIT(1)
+
+#define TEGRA_VI_VI_CORE_CONTROL 0x008c
+#define VI_VI_CORE_CONTROL_PLANAR_CONV_IN_SEL_EXT BIT(31)
+#define VI_VI_CORE_CONTROL_CSC_INPUT_SEL_EXT BIT(30)
+#define VI_VI_CORE_CONTROL_INPUT_TO_ALT_MUX_SFT 27
+#define VI_VI_CORE_CONTROL_INPUT_TO_CORE_EXT_SFT 24
+#define VI_VI_CORE_CONTROL_OUTPUT_TO_ISP_EXT_SFT 21
+#define VI_VI_CORE_CONTROL_ISP_HOST_STALL_OFF BIT(20)
+#define VI_VI_CORE_CONTROL_V_DOWNSCALING BIT(19)
+#define VI_VI_CORE_CONTROL_V_AVERAGING BIT(18)
+#define VI_VI_CORE_CONTROL_H_DOWNSCALING BIT(17)
+#define VI_VI_CORE_CONTROL_H_AVERAGING BIT(16)
+#define VI_VI_CORE_CONTROL_CSC_INPUT_SEL BIT(11)
+#define VI_VI_CORE_CONTROL_PLANAR_CONV_INPUT_SEL BIT(10)
+#define VI_VI_CORE_CONTROL_INPUT_TO_CORE_SFT 8
+#define VI_VI_CORE_CONTROL_ISP_DOWNSAMPLE_SFT 5
+#define VI_VI_CORE_CONTROL_OUTPUT_TO_EPP_SFT 2
+#define VI_VI_CORE_CONTROL_OUTPUT_TO_ISP_SFT 0
+
+#define TEGRA_VI_VI_FIRST_OUTPUT_CONTROL 0x0090
+#define VI_OUTPUT_FORMAT_EXT BIT(22)
+#define VI_OUTPUT_V_DIRECTION BIT(20)
+#define VI_OUTPUT_H_DIRECTION BIT(19)
+#define VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT 17
+#define VI_OUTPUT_YUV_OUTPUT_FORMAT_UYVY (0 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT)
+#define VI_OUTPUT_YUV_OUTPUT_FORMAT_VYUY (1 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT)
+#define VI_OUTPUT_YUV_OUTPUT_FORMAT_YUYV (2 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT)
+#define VI_OUTPUT_YUV_OUTPUT_FORMAT_YVYU (3 << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT)
+#define VI_OUTPUT_OUTPUT_BYTE_SWAP BIT(16)
+#define VI_OUTPUT_LAST_PIXEL_DUPLICATION BIT(8)
+#define VI_OUTPUT_OUTPUT_FORMAT_SFT 0
+#define VI_OUTPUT_OUTPUT_FORMAT_YUV422POST (3 << VI_OUTPUT_OUTPUT_FORMAT_SFT)
+#define VI_OUTPUT_OUTPUT_FORMAT_YUV420PLANAR (6 << VI_OUTPUT_OUTPUT_FORMAT_SFT)
+
+#define TEGRA_VI_VIP_H_ACTIVE 0x00a4
+#define VI_VIP_H_ACTIVE_PERIOD_SFT 16 /* active pixels/line, must be even */
+#define VI_VIP_H_ACTIVE_START_SFT 0
+
+#define TEGRA_VI_VIP_V_ACTIVE 0x00a8
+#define VI_VIP_V_ACTIVE_PERIOD_SFT 16 /* active lines */
+#define VI_VIP_V_ACTIVE_START_SFT 0
+
+#define TEGRA_VI_VB0_START_ADDRESS_FIRST 0x00c4
+#define TEGRA_VI_VB0_BASE_ADDRESS_FIRST 0x00c8
+#define TEGRA_VI_VB0_START_ADDRESS_U 0x00cc
+#define TEGRA_VI_VB0_BASE_ADDRESS_U 0x00d0
+#define TEGRA_VI_VB0_START_ADDRESS_V 0x00d4
+#define TEGRA_VI_VB0_BASE_ADDRESS_V 0x00d8
+
+#define TEGRA_VI_FIRST_OUTPUT_FRAME_SIZE 0x00e0
+#define VI_FIRST_OUTPUT_FRAME_HEIGHT_SFT 16
+#define VI_FIRST_OUTPUT_FRAME_WIDTH_SFT 0
+
+#define TEGRA_VI_VB0_COUNT_FIRST 0x00e4
+
+#define TEGRA_VI_VB0_SIZE_FIRST 0x00e8
+#define VI_VB0_SIZE_FIRST_V_SFT 16
+#define VI_VB0_SIZE_FIRST_H_SFT 0
+
+#define TEGRA_VI_VB0_BUFFER_STRIDE_FIRST 0x00ec
+#define VI_VB0_BUFFER_STRIDE_FIRST_CHROMA_SFT 30
+#define VI_VB0_BUFFER_STRIDE_FIRST_LUMA_SFT 0
+
+#define TEGRA_VI_H_LPF_CONTROL 0x0108
+#define VI_H_LPF_CONTROL_CHROMA_SFT 16
+#define VI_H_LPF_CONTROL_LUMA_SFT 0
+
+#define TEGRA_VI_H_DOWNSCALE_CONTROL 0x010c
+#define TEGRA_VI_V_DOWNSCALE_CONTROL 0x0110
+
+#define TEGRA_VI_VIP_INPUT_STATUS 0x0144
+
+#define TEGRA_VI_VI_DATA_INPUT_CONTROL 0x0168
+#define VI_DATA_INPUT_SFT 0 /* [11:0] = mask pin inputs to VI core */
+
+#define TEGRA_VI_PIN_INPUT_ENABLE 0x016c
+#define VI_PIN_INPUT_VSYNC BIT(14)
+#define VI_PIN_INPUT_HSYNC BIT(13)
+#define VI_PIN_INPUT_VD_SFT 0 /* [11:0] = data bin N input enable */
+
+#define TEGRA_VI_PIN_INVERSION 0x0174
+#define VI_PIN_INVERSION_VSYNC_ACTIVE_HIGH BIT(1)
+#define VI_PIN_INVERSION_HSYNC_ACTIVE_HIGH BIT(0)
+
+#define TEGRA_VI_CAMERA_CONTROL 0x01a0
+#define VI_CAMERA_CONTROL_STOP_CAPTURE BIT(2)
+#define VI_CAMERA_CONTROL_TEST_MODE BIT(1)
+#define VI_CAMERA_CONTROL_VIP_ENABLE BIT(0)
+
+#define TEGRA_VI_VI_ENABLE 0x01a4
+#define VI_VI_ENABLE_SW_FLOW_CONTROL_OUT1 BIT(1)
+#define VI_VI_ENABLE_FIRST_OUTPUT_TO_MEM_DISABLE BIT(0)
+
+#define TEGRA_VI_VI_RAISE 0x01ac
+#define VI_VI_RAISE_ON_EDGE BIT(0)
+
+/* --------------------------------------------------------------------------
+ * VI
+ */
+
+static void tegra20_vi_write(struct tegra_vi_channel *chan, unsigned int addr, u32 val)
+{
+ writel(val, chan->vi->iomem + addr);
+}
+
+/*
+ * Get the main input format (YUV/RGB...) and the YUV variant as values to
+ * be written into registers for the current VI input mbus code.
+ */
+static void tegra20_vi_get_input_formats(struct tegra_vi_channel *chan,
+ unsigned int *main_input_format,
+ unsigned int *yuv_input_format)
+{
+ unsigned int input_mbus_code = chan->fmtinfo->code;
+
+ (*main_input_format) = VI_INPUT_INPUT_FORMAT_YUV422;
+
+ switch (input_mbus_code) {
+ case MEDIA_BUS_FMT_UYVY8_2X8:
+ (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_UYVY;
+ break;
+ case MEDIA_BUS_FMT_VYUY8_2X8:
+ (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_VYUY;
+ break;
+ case MEDIA_BUS_FMT_YUYV8_2X8:
+ (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_YUYV;
+ break;
+ case MEDIA_BUS_FMT_YVYU8_2X8:
+ (*yuv_input_format) = VI_INPUT_YUV_INPUT_FORMAT_YVYU;
+ break;
+ }
+}
+
+/*
+ * Get the main output format (YUV/RGB...) and the YUV variant as values to
+ * be written into registers for the current VI output pixel format.
+ */
+static void tegra20_vi_get_output_formats(struct tegra_vi_channel *chan,
+ unsigned int *main_output_format,
+ unsigned int *yuv_output_format)
+{
+ u32 output_fourcc = chan->format.pixelformat;
+
+ /* Default to YUV422 non-planar (U8Y8V8Y8) after downscaling */
+ (*main_output_format) = VI_OUTPUT_OUTPUT_FORMAT_YUV422POST;
+ (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_UYVY;
+
+ switch (output_fourcc) {
+ case V4L2_PIX_FMT_UYVY:
+ (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_UYVY;
+ break;
+ case V4L2_PIX_FMT_VYUY:
+ (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_VYUY;
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_YUYV;
+ break;
+ case V4L2_PIX_FMT_YVYU:
+ (*yuv_output_format) = VI_OUTPUT_YUV_OUTPUT_FORMAT_YVYU;
+ break;
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
+ (*main_output_format) = VI_OUTPUT_OUTPUT_FORMAT_YUV420PLANAR;
+ break;
+ }
+}
+
+/*
+ * Make the VI to be accessible (needed on Tegra20).
+ *
+ * This function writes an unknown bit into an unknown register. The code
+ * comes from a downstream 3.1 kernel that has a working VIP driver for
+ * Tegra20, and removing it makes the VI completely unaccessible. It should
+ * be rewritten and possibly moved elsewhere, but the appropriate location
+ * and implementation is unknown due to a total lack of documentation.
+ */
+static int tegra20_vi_enable(struct tegra_vi *vi, bool on)
+{
+ /* from arch/arm/mach-tegra/iomap.h */
+ const phys_addr_t TEGRA_APB_MISC_BASE = 0x70000000;
+ const unsigned long reg_offset = 0x42c;
+ void __iomem *apb_misc;
+ u32 val;
+
+ apb_misc = ioremap(TEGRA_APB_MISC_BASE, PAGE_SIZE);
+ if (!apb_misc)
+ apb_misc = ERR_PTR(-ENOENT);
+ if (IS_ERR(apb_misc))
+ return dev_err_probe(vi->dev, PTR_ERR(apb_misc), "cannot access APB_MISC");
+
+ val = readl(apb_misc + reg_offset);
+ val &= ~BIT(0);
+ val |= on ? BIT(0) : 0;
+ writel(val, apb_misc + reg_offset);
+ iounmap(apb_misc);
+
+ return 0;
+}
+
+static int tegra20_channel_host1x_syncpt_init(struct tegra_vi_channel *chan)
+{
+ struct tegra_vi *vi = chan->vi;
+ struct host1x_syncpt *out_sp;
+
+ out_sp = host1x_syncpt_request(&vi->client, HOST1X_SYNCPT_CLIENT_MANAGED);
+ if (!out_sp)
+ return dev_err_probe(vi->dev, -ENOMEM, "failed to request syncpoint\n");
+
+ chan->out_sp = out_sp;
+
+ return 0;
+}
+
+static void tegra20_channel_host1x_syncpt_free(struct tegra_vi_channel *chan)
+{
+ host1x_syncpt_put(chan->out_sp);
+}
+
+static void tegra20_fmt_align(struct v4l2_pix_format *pix, unsigned int bpp)
+{
+ pix->width = clamp(pix->width, TEGRA20_MIN_WIDTH, TEGRA20_MAX_WIDTH);
+ pix->height = clamp(pix->height, TEGRA20_MIN_HEIGHT, TEGRA20_MAX_HEIGHT);
+
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ pix->bytesperline = roundup(pix->width, 2) * 2;
+ pix->sizeimage = roundup(pix->width, 2) * 2 * pix->height;
+ break;
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
+ pix->bytesperline = roundup(pix->width, 8);
+ pix->sizeimage = roundup(pix->width, 8) * pix->height * 3 / 2;
+ break;
+ }
+}
+
+/*
+ * Compute buffer offsets once per stream so that
+ * tegra20_channel_vi_buffer_setup() only has to do very simple maths for
+ * each buffer.
+ */
+static void tegra20_channel_queue_setup(struct tegra_vi_channel *chan)
+{
+ unsigned int stride = chan->format.bytesperline;
+ unsigned int height = chan->format.height;
+
+ chan->start_offset = 0;
+
+ switch (chan->format.pixelformat) {
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ if (chan->vflip)
+ chan->start_offset += stride * (height - 1);
+ if (chan->hflip)
+ chan->start_offset += stride - 1;
+ break;
+
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
+ chan->addr_offset_u = stride * height;
+ chan->addr_offset_v = chan->addr_offset_u + stride * height / 4;
+
+ /* For YVU420, we swap the locations of the U and V planes. */
+ if (chan->format.pixelformat == V4L2_PIX_FMT_YVU420) {
+ unsigned long temp;
+
+ temp = chan->addr_offset_u;
+ chan->addr_offset_u = chan->addr_offset_v;
+ chan->addr_offset_v = temp;
+ }
+
+ chan->start_offset_u = chan->addr_offset_u;
+ chan->start_offset_v = chan->addr_offset_v;
+
+ if (chan->vflip) {
+ chan->start_offset += stride * (height - 1);
+ chan->start_offset_u += (stride / 2) * ((height / 2) - 1);
+ chan->start_offset_v += (stride / 2) * ((height / 2) - 1);
+ }
+ if (chan->hflip) {
+ chan->start_offset += stride - 1;
+ chan->start_offset_u += (stride / 2) - 1;
+ chan->start_offset_v += (stride / 2) - 1;
+ }
+ break;
+ }
+}
+
+static void release_buffer(struct tegra_vi_channel *chan,
+ struct tegra_channel_buffer *buf,
+ enum vb2_buffer_state state)
+{
+ struct vb2_v4l2_buffer *vb = &buf->buf;
+
+ vb->sequence = chan->sequence++;
+ vb->field = V4L2_FIELD_NONE;
+ vb->vb2_buf.timestamp = ktime_get_ns();
+ vb2_buffer_done(&vb->vb2_buf, state);
+}
+
+static void tegra20_channel_vi_buffer_setup(struct tegra_vi_channel *chan,
+ struct tegra_channel_buffer *buf)
+{
+ dma_addr_t base = buf->addr;
+
+ switch (chan->fmtinfo->fourcc) {
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YVU420:
+ tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_U, base + chan->addr_offset_u);
+ tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_U, base + chan->start_offset_u);
+ tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_V, base + chan->addr_offset_v);
+ tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_V, base + chan->start_offset_v);
+ fallthrough;
+
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ tegra20_vi_write(chan, TEGRA_VI_VB0_BASE_ADDRESS_FIRST, base);
+ tegra20_vi_write(chan, TEGRA_VI_VB0_START_ADDRESS_FIRST, base + chan->start_offset);
+ break;
+ }
+}
+
+static int tegra20_channel_capture_frame(struct tegra_vi_channel *chan,
+ struct tegra_channel_buffer *buf)
+{
+ u32 value;
+ int err;
+
+ chan->next_out_sp_idx++;
+
+ tegra20_channel_vi_buffer_setup(chan, buf);
+
+ tegra20_vi_write(chan, TEGRA_VI_CAMERA_CONTROL, VI_CAMERA_CONTROL_VIP_ENABLE);
+
+ /* Wait for syncpt counter to reach frame start event threshold */
+ err = host1x_syncpt_wait(chan->out_sp, chan->next_out_sp_idx,
+ TEGRA_VI_SYNCPT_WAIT_TIMEOUT, &value);
+ if (err) {
+ host1x_syncpt_incr(chan->out_sp);
+ dev_err_ratelimited(&chan->video.dev, "frame start syncpt timeout: %d\n", err);
+ release_buffer(chan, buf, VB2_BUF_STATE_ERROR);
+ return err;
+ }
+
+ tegra20_vi_write(chan, TEGRA_VI_CAMERA_CONTROL,
+ VI_CAMERA_CONTROL_STOP_CAPTURE | VI_CAMERA_CONTROL_VIP_ENABLE);
+
+ release_buffer(chan, buf, VB2_BUF_STATE_DONE);
+
+ return 0;
+}
+
+static int tegra20_chan_capture_kthread_start(void *data)
+{
+ struct tegra_vi_channel *chan = data;
+ struct tegra_channel_buffer *buf;
+ unsigned int retries = 0;
+ int err = 0;
+
+ while (1) {
+ /*
+ * Source is not streaming if error is non-zero.
+ * So, do not dequeue buffers on error and let the thread sleep
+ * till kthread stop signal is received.
+ */
+ wait_event_interruptible(chan->start_wait,
+ kthread_should_stop() ||
+ (!list_empty(&chan->capture) && !err));
+
+ if (kthread_should_stop())
+ break;
+
+ /* dequeue the buffer and start capture */
+ spin_lock(&chan->start_lock);
+ if (list_empty(&chan->capture)) {
+ spin_unlock(&chan->start_lock);
+ continue;
+ }
+
+ buf = list_first_entry(&chan->capture, struct tegra_channel_buffer, queue);
+ list_del_init(&buf->queue);
+ spin_unlock(&chan->start_lock);
+
+ err = tegra20_channel_capture_frame(chan, buf);
+ if (!err) {
+ retries = 0;
+ continue;
+ }
+
+ if (retries++ > chan->syncpt_timeout_retry)
+ vb2_queue_error(&chan->queue);
+ else
+ err = 0;
+ }
+
+ return 0;
+}
+
+static void tegra20_camera_capture_setup(struct tegra_vi_channel *chan)
+{
+ u32 output_fourcc = chan->format.pixelformat;
+ int width = chan->format.width;
+ int height = chan->format.height;
+ int stride_l = chan->format.bytesperline;
+ int stride_c = (output_fourcc == V4L2_PIX_FMT_YUV420 ||
+ output_fourcc == V4L2_PIX_FMT_YVU420) ? 1 : 0;
+ int main_output_format;
+ int yuv_output_format;
+
+ tegra20_vi_get_output_formats(chan, &main_output_format, &yuv_output_format);
+
+ /*
+ * Set up low pass filter. Use 0x240 for chromaticity and 0x240
+ * for luminance, which is the default and means not to touch
+ * anything.
+ */
+ tegra20_vi_write(chan, TEGRA_VI_H_LPF_CONTROL,
+ 0x0240 << VI_H_LPF_CONTROL_LUMA_SFT |
+ 0x0240 << VI_H_LPF_CONTROL_CHROMA_SFT);
+
+ /* Set up raise-on-edge, so we get an interrupt on end of frame. */
+ tegra20_vi_write(chan, TEGRA_VI_VI_RAISE, VI_VI_RAISE_ON_EDGE);
+
+ tegra20_vi_write(chan, TEGRA_VI_VI_FIRST_OUTPUT_CONTROL,
+ (chan->vflip ? VI_OUTPUT_V_DIRECTION : 0) |
+ (chan->hflip ? VI_OUTPUT_H_DIRECTION : 0) |
+ yuv_output_format << VI_OUTPUT_YUV_OUTPUT_FORMAT_SFT |
+ main_output_format << VI_OUTPUT_OUTPUT_FORMAT_SFT);
+
+ /* Set up frame size */
+ tegra20_vi_write(chan, TEGRA_VI_FIRST_OUTPUT_FRAME_SIZE,
+ height << VI_FIRST_OUTPUT_FRAME_HEIGHT_SFT |
+ width << VI_FIRST_OUTPUT_FRAME_WIDTH_SFT);
+
+ /* First output memory enabled */
+ tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE, 0);
+
+ /* Set the number of frames in the buffer */
+ tegra20_vi_write(chan, TEGRA_VI_VB0_COUNT_FIRST, 1);
+
+ /* Set up buffer frame size */
+ tegra20_vi_write(chan, TEGRA_VI_VB0_SIZE_FIRST,
+ height << VI_VB0_SIZE_FIRST_V_SFT |
+ width << VI_VB0_SIZE_FIRST_H_SFT);
+
+ tegra20_vi_write(chan, TEGRA_VI_VB0_BUFFER_STRIDE_FIRST,
+ stride_l << VI_VB0_BUFFER_STRIDE_FIRST_LUMA_SFT |
+ stride_c << VI_VB0_BUFFER_STRIDE_FIRST_CHROMA_SFT);
+
+ tegra20_vi_write(chan, TEGRA_VI_VI_ENABLE, 0);
+}
+
+static int tegra20_vi_start_streaming(struct vb2_queue *vq, u32 count)
+{
+ struct tegra_vi_channel *chan = vb2_get_drv_priv(vq);
+ struct media_pipeline *pipe = &chan->video.pipe;
+ int err;
+
+ chan->next_out_sp_idx = host1x_syncpt_read(chan->out_sp);
+
+ err = video_device_pipeline_start(&chan->video, pipe);
+ if (err)
+ goto error_pipeline_start;
+
+ tegra20_camera_capture_setup(chan);
+
+ err = tegra_channel_set_stream(chan, true);
+ if (err)
+ goto error_set_stream;
+
+ chan->sequence = 0;
+
+ chan->kthread_start_capture = kthread_run(tegra20_chan_capture_kthread_start,
+ chan, "%s:0", chan->video.name);
+ if (IS_ERR(chan->kthread_start_capture)) {
+ err = PTR_ERR(chan->kthread_start_capture);
+ chan->kthread_start_capture = NULL;
+ dev_err_probe(&chan->video.dev, err, "failed to run capture kthread\n");
+ goto error_kthread_start;
+ }
+
+ return 0;
+
+error_kthread_start:
+ tegra_channel_set_stream(chan, false);
+error_set_stream:
+ video_device_pipeline_stop(&chan->video);
+error_pipeline_start:
+ tegra_channel_release_buffers(chan, VB2_BUF_STATE_QUEUED);
+
+ return err;
+}
+
+static void tegra20_vi_stop_streaming(struct vb2_queue *vq)
+{
+ struct tegra_vi_channel *chan = vb2_get_drv_priv(vq);
+
+ if (chan->kthread_start_capture) {
+ kthread_stop(chan->kthread_start_capture);
+ chan->kthread_start_capture = NULL;
+ }
+
+ tegra_channel_release_buffers(chan, VB2_BUF_STATE_ERROR);
+ tegra_channel_set_stream(chan, false);
+ video_device_pipeline_stop(&chan->video);
+}
+
+static const struct tegra_vi_ops tegra20_vi_ops = {
+ .vi_enable = tegra20_vi_enable,
+ .channel_host1x_syncpt_init = tegra20_channel_host1x_syncpt_init,
+ .channel_host1x_syncpt_free = tegra20_channel_host1x_syncpt_free,
+ .vi_fmt_align = tegra20_fmt_align,
+ .channel_queue_setup = tegra20_channel_queue_setup,
+ .vi_start_streaming = tegra20_vi_start_streaming,
+ .vi_stop_streaming = tegra20_vi_stop_streaming,
+};
+
+#define TEGRA20_VIDEO_FMT(MBUS_CODE, BPP, FOURCC) \
+{ \
+ .code = MEDIA_BUS_FMT_##MBUS_CODE, \
+ .bpp = BPP, \
+ .fourcc = V4L2_PIX_FMT_##FOURCC, \
+}
+
+static const struct tegra_video_format tegra20_video_formats[] = {
+ TEGRA20_VIDEO_FMT(UYVY8_2X8, 2, UYVY),
+ TEGRA20_VIDEO_FMT(VYUY8_2X8, 2, VYUY),
+ TEGRA20_VIDEO_FMT(YUYV8_2X8, 2, YUYV),
+ TEGRA20_VIDEO_FMT(YVYU8_2X8, 2, YVYU),
+ TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YUV420),
+ TEGRA20_VIDEO_FMT(UYVY8_2X8, 1, YVU420),
+};
+
+const struct tegra_vi_soc tegra20_vi_soc = {
+ .video_formats = tegra20_video_formats,
+ .nformats = ARRAY_SIZE(tegra20_video_formats),
+ .default_video_format = &tegra20_video_formats[0],
+ .ops = &tegra20_vi_ops,
+ .vi_max_channels = 1, /* parallel input (VIP) */
+ .vi_max_clk_hz = 150000000,
+ .has_h_v_flip = true,
+};
+
+/* --------------------------------------------------------------------------
+ * VIP
+ */
+
+/*
+ * VIP-specific configuration for stream start.
+ *
+ * Whatever is common among VIP and CSI is done by the VI component (see
+ * tegra20_vi_start_streaming()). Here we do what is VIP-specific.
+ */
+static int tegra20_vip_start_streaming(struct tegra_vip_channel *vip_chan)
+{
+ struct tegra_vi_channel *vi_chan = v4l2_get_subdev_hostdata(&vip_chan->subdev);
+ int width = vi_chan->format.width;
+ int height = vi_chan->format.height;
+
+ unsigned int main_input_format;
+ unsigned int yuv_input_format;
+
+ tegra20_vi_get_input_formats(vi_chan, &main_input_format, &yuv_input_format);
+
+ tegra20_vi_write(vi_chan, TEGRA_VI_VI_CORE_CONTROL, 0);
+
+ tegra20_vi_write(vi_chan, TEGRA_VI_VI_INPUT_CONTROL,
+ VI_INPUT_VIP_INPUT_ENABLE | main_input_format | yuv_input_format);
+
+ tegra20_vi_write(vi_chan, TEGRA_VI_V_DOWNSCALE_CONTROL, 0);
+ tegra20_vi_write(vi_chan, TEGRA_VI_H_DOWNSCALE_CONTROL, 0);
+
+ tegra20_vi_write(vi_chan, TEGRA_VI_VIP_V_ACTIVE, height << VI_VIP_V_ACTIVE_PERIOD_SFT);
+ tegra20_vi_write(vi_chan, TEGRA_VI_VIP_H_ACTIVE,
+ roundup(width, 2) << VI_VIP_H_ACTIVE_PERIOD_SFT);
+
+ /*
+ * For VIP, D9..D2 is mapped to the video decoder's P7..P0.
+ * Disable/mask out the other Dn wires. When not in BT656
+ * mode we also need the V/H sync.
+ */
+ tegra20_vi_write(vi_chan, TEGRA_VI_PIN_INPUT_ENABLE,
+ GENMASK(9, 2) << VI_PIN_INPUT_VD_SFT |
+ VI_PIN_INPUT_HSYNC | VI_PIN_INPUT_VSYNC);
+ tegra20_vi_write(vi_chan, TEGRA_VI_VI_DATA_INPUT_CONTROL,
+ GENMASK(9, 2) << VI_DATA_INPUT_SFT);
+ tegra20_vi_write(vi_chan, TEGRA_VI_PIN_INVERSION, 0);
+
+ tegra20_vi_write(vi_chan, TEGRA_VI_CONT_SYNCPT_OUT_1,
+ VI_CONT_SYNCPT_OUT_1_CONTINUOUS_SYNCPT |
+ host1x_syncpt_id(vi_chan->out_sp) << VI_CONT_SYNCPT_OUT_1_SYNCPT_IDX_SFT);
+
+ tegra20_vi_write(vi_chan, TEGRA_VI_CAMERA_CONTROL, VI_CAMERA_CONTROL_STOP_CAPTURE);
+
+ return 0;
+}
+
+static const struct tegra_vip_ops tegra20_vip_ops = {
+ .vip_start_streaming = tegra20_vip_start_streaming,
+};
+
+const struct tegra_vip_soc tegra20_vip_soc = {
+ .ops = &tegra20_vip_ops,
+};
@@ -1862,6 +1862,9 @@ static int tegra_vi_remove(struct platform_device *pdev)
}
static const struct of_device_id tegra_vi_of_id_table[] = {
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC)
+ { .compatible = "nvidia,tegra20-vi", .data = &tegra20_vi_soc },
+#endif
#if defined(CONFIG_ARCH_TEGRA_210_SOC)
{ .compatible = "nvidia,tegra210-vi", .data = &tegra210_vi_soc },
#endif
@@ -293,6 +293,9 @@ struct tegra_video_format {
u32 fourcc;
};
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC)
+extern const struct tegra_vi_soc tegra20_vi_soc;
+#endif
#if defined(CONFIG_ARCH_TEGRA_210_SOC)
extern const struct tegra_vi_soc tegra210_vi_soc;
#endif
@@ -123,6 +123,10 @@ static int host1x_video_remove(struct host1x_device *dev)
}
static const struct of_device_id host1x_video_subdevs[] = {
+#if defined(CONFIG_ARCH_TEGRA_2x_SOC)
+ { .compatible = "nvidia,tegra20-vip", },
+ { .compatible = "nvidia,tegra20-vi", },
+#endif
#if defined(CONFIG_ARCH_TEGRA_210_SOC)
{ .compatible = "nvidia,tegra210-csi", },
{ .compatible = "nvidia,tegra210-vi", },
@@ -141,6 +145,7 @@ static struct host1x_driver host1x_video_driver = {
static struct platform_driver * const drivers[] = {
&tegra_csi_driver,
+ &tegra_vip_driver,
&tegra_vi_driver,
};
@@ -24,5 +24,6 @@ int tegra_v4l2_nodes_setup_tpg(struct tegra_video_device *vid);
void tegra_v4l2_nodes_cleanup_tpg(struct tegra_video_device *vid);
extern struct platform_driver tegra_vi_driver;
+extern struct platform_driver tegra_vip_driver;
extern struct platform_driver tegra_csi_driver;
#endif
The staging tegra-video driver currently implements MIPI CSI-2 video capture for Tegra210. Add support for parallel video capture (VIP) on Tegra20. With the generalizations added to the VI driver in previous commits, this is only a matter of adding the tegra20.c implementation and registering it. Unfortunately there was no documentation available for the VI or VIP peripherals of Tegra20 (or any other Tegra chips). This implementation has been based entirely on the code from a vendor kernel based on Linux 3.1 and massively adapted to fit into the tegra-video driver. Parts of this code is definitely non-optimal to say the least (especially tegra20_vi_enable() and the single-frame capture logic), but it was impossible to improve it. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> --- Changed in v2: - fix tegra20_vi_enable() to clear bit when on==false - clamp width/height from set/try_fmt to avoid returning sizeimage=0 (fixes v4l2-compliance) --- MAINTAINERS | 1 + drivers/staging/media/tegra-video/Makefile | 1 + drivers/staging/media/tegra-video/tegra20.c | 661 ++++++++++++++++++++ drivers/staging/media/tegra-video/vi.c | 3 + drivers/staging/media/tegra-video/vi.h | 3 + drivers/staging/media/tegra-video/video.c | 5 + drivers/staging/media/tegra-video/video.h | 1 + 7 files changed, 675 insertions(+) create mode 100644 drivers/staging/media/tegra-video/tegra20.c