@@ -4598,6 +4598,32 @@ static void rtl8xxxu_set_aifs(struct rtl8xxxu_priv *priv, u8 slot_time)
}
}
+static void rtl8xxxu_update_ra_report(struct rtl8xxxu_ra_report *rarpt,
+ u8 rate, u8 sgi, u8 bw)
+{
+ u8 mcs, nss;
+
+ rarpt->txrate.flags = 0;
+
+ if (rate <= DESC_RATE_54M) {
+ rarpt->txrate.legacy = rtl8xxxu_legacy_ratetable[rate].bitrate;
+ } else {
+ rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
+ rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+ rarpt->txrate.mcs = mcs;
+ rarpt->txrate.nss = nss;
+
+ if (sgi)
+ rarpt->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+ rarpt->txrate.bw = bw;
+ }
+
+ rarpt->bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+ rarpt->desc_rate = rate;
+}
+
static void
rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf, u64 changed)
@@ -4620,9 +4646,7 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
u32 ramask;
int sgi = 0;
u8 highest_rate;
- u8 mcs = 0, nss = 0;
- u32 bit_rate;
-
+ u8 bw;
rcu_read_lock();
sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4647,37 +4671,19 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
sgi = 1;
highest_rate = fls(ramask) - 1;
- if (highest_rate < DESC_RATE_MCS0) {
- rarpt->txrate.legacy =
- rtl8xxxu_legacy_ratetable[highest_rate].bitrate;
- } else {
- rtl8xxxu_desc_to_mcsrate(highest_rate,
- &mcs, &nss);
- rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
-
- rarpt->txrate.mcs = mcs;
- rarpt->txrate.nss = nss;
-
- if (sgi) {
- rarpt->txrate.flags |=
- RATE_INFO_FLAGS_SHORT_GI;
- }
-
- if (rtl8xxxu_ht40_2g &&
- (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
- rarpt->txrate.bw = RATE_INFO_BW_40;
- else
- rarpt->txrate.bw = RATE_INFO_BW_20;
- }
+ if (rtl8xxxu_ht40_2g &&
+ (sta->deflink.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
+ bw = RATE_INFO_BW_40;
+ else
+ bw = RATE_INFO_BW_20;
rcu_read_unlock();
- bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
- rarpt->bit_rate = bit_rate;
- rarpt->desc_rate = highest_rate;
+
+ rtl8xxxu_update_ra_report(rarpt, highest_rate, sgi, bw);
priv->vif = vif;
priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
- priv->fops->update_rate_mask(priv, ramask, 0, sgi, rarpt->txrate.bw == RATE_INFO_BW_40);
+ priv->fops->update_rate_mask(priv, ramask, 0, sgi, bw == RATE_INFO_BW_40);
rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
@@ -5538,9 +5544,7 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
u8 bt_info = 0;
struct rtl8xxxu_btcoex *btcoex;
struct rtl8xxxu_ra_report *rarpt;
- u8 rate, sgi, bw;
- u32 bit_rate;
- u8 mcs = 0, nss = 0;
+ u8 bw;
priv = container_of(work, struct rtl8xxxu_priv, c2hcmd_work);
btcoex = &priv->bt_coex;
@@ -5566,37 +5570,18 @@ static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
rtl8723bu_handle_bt_info(priv);
break;
case C2H_8723B_RA_REPORT:
- rarpt->txrate.flags = 0;
- rate = c2h->ra_report.rate;
- sgi = c2h->ra_report.sgi;
-
- if (rate < DESC_RATE_MCS0) {
- rarpt->txrate.legacy =
- rtl8xxxu_legacy_ratetable[rate].bitrate;
- } else {
- rtl8xxxu_desc_to_mcsrate(rate, &mcs, &nss);
- rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+ bw = rarpt->txrate.bw;
- rarpt->txrate.mcs = mcs;
- rarpt->txrate.nss = nss;
-
- if (sgi) {
- rarpt->txrate.flags |=
- RATE_INFO_FLAGS_SHORT_GI;
- }
-
- if (skb->len > RTL8XXXU_C2H_HDR_LEN +
- offsetof(typeof(c2h->ra_report), bw)) {
- if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
- bw = RATE_INFO_BW_40;
- else
- bw = RATE_INFO_BW_20;
- rarpt->txrate.bw = bw;
- }
+ if (skb->len > RTL8XXXU_C2H_HDR_LEN +
+ offsetof(typeof(c2h->ra_report), bw)) {
+ if (c2h->ra_report.bw == RTL8XXXU_CHANNEL_WIDTH_40)
+ bw = RATE_INFO_BW_40;
+ else
+ bw = RATE_INFO_BW_20;
}
- bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
- rarpt->bit_rate = bit_rate;
- rarpt->desc_rate = rate;
+
+ rtl8xxxu_update_ra_report(rarpt, c2h->ra_report.rate,
+ c2h->ra_report.sgi, bw);
break;
default:
break;
The ra_report struct is used for reporting the TX rate via sta_statistics. The code which fills it out is duplicated in two places, and the RTL8188EU will need it in a third place. Move this code into a new function rtl8xxxu_update_ra_report. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- v2: - Compare against DESC_RATE_54M instead of DESC_RATE_MCS0. --- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 107 ++++++++---------- 1 file changed, 46 insertions(+), 61 deletions(-)