| Message ID | 20221214171145.2913557-3-bmasney@redhat.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dts: qcom: sc8280xp: add i2c, spi, and rng nodes | expand |
On 14.12.2022 18:11, Brian Masney wrote: > In preparation for adding the missing SPI and I2C nodes to > sc8280xp.dtsi, it was decided to rename all of the existing qupX_ > uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead > and rename qup2_i2c5 to i2c21. Under the old name, this was the 5th > index under qup2, which starts at index 16. Note that some nodes are > moved in the file by this patch to preserve the expected sort order in > the file. > > Signed-off-by: Brian Masney <bmasney@redhat.com> > Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/ > --- > This is a new patch that's introduced in v2. > > arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 90 ++++++------- > .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 120 +++++++++--------- > arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- > 3 files changed, 106 insertions(+), 106 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts > index db273face248..0de1bdb68e2c 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts > @@ -228,6 +228,43 @@ vreg_l9d: ldo9 { > }; > }; > > +&i2c21 { > + clock-frequency = <400000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c21_default>; > + > + status = "okay"; > + > + touchpad@15 { > + compatible = "hid-over-i2c"; > + reg = <0x15>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tpad_default>; > + > + wakeup-source; > + }; > + > + keyboard@68 { > + compatible = "hid-over-i2c"; > + reg = <0x68>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&kybd_default>; > + > + wakeup-source; > + }; > +}; > + > &pcie2a { > perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; > wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; > @@ -326,43 +363,6 @@ &qup2 { > status = "okay"; > }; > > -&qup2_i2c5 { > - clock-frequency = <400000>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&qup2_i2c5_default>; > - > - status = "okay"; > - > - touchpad@15 { > - compatible = "hid-over-i2c"; > - reg = <0x15>; > - > - hid-descr-addr = <0x1>; > - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&tpad_default>; > - > - wakeup-source; > - }; > - > - keyboard@68 { > - compatible = "hid-over-i2c"; > - reg = <0x68>; > - > - hid-descr-addr = <0x1>; > - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&kybd_default>; > - > - wakeup-source; > - }; > -}; > - > &remoteproc_adsp { > firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; > > @@ -494,6 +494,14 @@ hastings_reg_en: hastings-reg-en-state { > &tlmm { > gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; > > + i2c21_default: i2c21-default-state { > + pins = "gpio81", "gpio82"; > + function = "qup21"; > + > + bias-disable; > + drive-strength = <16>; This is rather nitty, but other DTs usually do pins function drive-strength bias- in/output- I see this patch just moves things around, but if you were to send a v(n+1), please consider shuffling these properties around. Regardless of that: Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > + }; > + > kybd_default: kybd-default-state { > disable-pins { > pins = "gpio102"; > @@ -598,14 +606,6 @@ qup0_i2c4_default: qup0-i2c4-default-state { > drive-strength = <16>; > }; > > - qup2_i2c5_default: qup2-i2c5-default-state { > - pins = "gpio81", "gpio82"; > - function = "qup21"; > - > - bias-disable; > - drive-strength = <16>; > - }; > - > tpad_default: tpad-default-state { > int-n-pins { > pins = "gpio182"; > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > index 568c6be1ceaa..d7af2040cbcb 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts > @@ -282,6 +282,59 @@ vreg_l9d: ldo9 { > }; > }; > > +&i2c21 { > + clock-frequency = <400000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c21_default>; > + > + status = "okay"; > + > + touchpad@15 { > + compatible = "hid-over-i2c"; > + reg = <0x15>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tpad_default>; > + > + wakeup-source; > + > + status = "disabled"; > + }; > + > + touchpad@2c { > + compatible = "hid-over-i2c"; > + reg = <0x2c>; > + > + hid-descr-addr = <0x20>; > + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&tpad_default>; > + > + wakeup-source; > + }; > + > + keyboard@68 { > + compatible = "hid-over-i2c"; > + reg = <0x68>; > + > + hid-descr-addr = <0x1>; > + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; > + vdd-supply = <&vreg_misc_3p3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&kybd_default>; > + > + wakeup-source; > + }; > +}; > + > &pcie2a { > perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; > wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; > @@ -531,59 +584,6 @@ &qup2 { > status = "okay"; > }; > > -&qup2_i2c5 { > - clock-frequency = <400000>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&qup2_i2c5_default>; > - > - status = "okay"; > - > - touchpad@15 { > - compatible = "hid-over-i2c"; > - reg = <0x15>; > - > - hid-descr-addr = <0x1>; > - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&tpad_default>; > - > - wakeup-source; > - > - status = "disabled"; > - }; > - > - touchpad@2c { > - compatible = "hid-over-i2c"; > - reg = <0x2c>; > - > - hid-descr-addr = <0x20>; > - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&tpad_default>; > - > - wakeup-source; > - }; > - > - keyboard@68 { > - compatible = "hid-over-i2c"; > - reg = <0x68>; > - > - hid-descr-addr = <0x1>; > - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; > - vdd-supply = <&vreg_misc_3p3>; > - > - pinctrl-names = "default"; > - pinctrl-0 = <&kybd_default>; > - > - wakeup-source; > - }; > -}; > - > &remoteproc_adsp { > firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; > > @@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state { > bias-disable; > }; > > + i2c21_default: i2c21-default-state { > + pins = "gpio81", "gpio82"; > + function = "qup21"; > + bias-disable; > + drive-strength = <16>; > + }; > + > kybd_default: kybd-default-state { > disable-pins { > pins = "gpio102"; > @@ -801,13 +808,6 @@ qup0_i2c4_default: qup0-i2c4-default-state { > drive-strength = <16>; > }; > > - qup2_i2c5_default: qup2-i2c5-default-state { > - pins = "gpio81", "gpio82"; > - function = "qup21"; > - bias-disable; > - drive-strength = <16>; > - }; > - > tpad_default: tpad-default-state { > int-n-pins { > pins = "gpio182"; > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > index 951cb1b6fcc4..929365cff555 100644 > --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi > @@ -827,7 +827,7 @@ uart17: serial@884000 { > status = "disabled"; > }; > > - qup2_i2c5: i2c@894000 { > + i2c21: i2c@894000 { > compatible = "qcom,geni-i2c"; > reg = <0 0x00894000 0 0x4000>; > clock-names = "se";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index db273face248..0de1bdb68e2c 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -228,6 +228,43 @@ vreg_l9d: ldo9 { }; }; +&i2c21 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c21_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; + }; +}; + &pcie2a { perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; @@ -326,43 +363,6 @@ &qup2 { status = "okay"; }; -&qup2_i2c5 { - clock-frequency = <400000>; - - pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>; - - status = "okay"; - - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; - - wakeup-source; - }; - - keyboard@68 { - compatible = "hid-over-i2c"; - reg = <0x68>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&kybd_default>; - - wakeup-source; - }; -}; - &remoteproc_adsp { firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; @@ -494,6 +494,14 @@ hastings_reg_en: hastings-reg-en-state { &tlmm { gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + + bias-disable; + drive-strength = <16>; + }; + kybd_default: kybd-default-state { disable-pins { pins = "gpio102"; @@ -598,14 +606,6 @@ qup0_i2c4_default: qup0-i2c4-default-state { drive-strength = <16>; }; - qup2_i2c5_default: qup2-i2c5-default-state { - pins = "gpio81", "gpio82"; - function = "qup21"; - - bias-disable; - drive-strength = <16>; - }; - tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 568c6be1ceaa..d7af2040cbcb 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -282,6 +282,59 @@ vreg_l9d: ldo9 { }; }; +&i2c21 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c21_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + + status = "disabled"; + }; + + touchpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + + hid-descr-addr = <0x20>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&tpad_default>; + + wakeup-source; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + + pinctrl-names = "default"; + pinctrl-0 = <&kybd_default>; + + wakeup-source; + }; +}; + &pcie2a { perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; @@ -531,59 +584,6 @@ &qup2 { status = "okay"; }; -&qup2_i2c5 { - clock-frequency = <400000>; - - pinctrl-names = "default"; - pinctrl-0 = <&qup2_i2c5_default>; - - status = "okay"; - - touchpad@15 { - compatible = "hid-over-i2c"; - reg = <0x15>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; - - wakeup-source; - - status = "disabled"; - }; - - touchpad@2c { - compatible = "hid-over-i2c"; - reg = <0x2c>; - - hid-descr-addr = <0x20>; - interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&tpad_default>; - - wakeup-source; - }; - - keyboard@68 { - compatible = "hid-over-i2c"; - reg = <0x68>; - - hid-descr-addr = <0x1>; - interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&vreg_misc_3p3>; - - pinctrl-names = "default"; - pinctrl-0 = <&kybd_default>; - - wakeup-source; - }; -}; - &remoteproc_adsp { firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; @@ -698,6 +698,13 @@ hall_int_n_default: hall-int-n-state { bias-disable; }; + i2c21_default: i2c21-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + bias-disable; + drive-strength = <16>; + }; + kybd_default: kybd-default-state { disable-pins { pins = "gpio102"; @@ -801,13 +808,6 @@ qup0_i2c4_default: qup0-i2c4-default-state { drive-strength = <16>; }; - qup2_i2c5_default: qup2-i2c5-default-state { - pins = "gpio81", "gpio82"; - function = "qup21"; - bias-disable; - drive-strength = <16>; - }; - tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 951cb1b6fcc4..929365cff555 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -827,7 +827,7 @@ uart17: serial@884000 { status = "disabled"; }; - qup2_i2c5: i2c@894000 { + i2c21: i2c@894000 { compatible = "qcom,geni-i2c"; reg = <0 0x00894000 0 0x4000>; clock-names = "se";
In preparation for adding the missing SPI and I2C nodes to sc8280xp.dtsi, it was decided to rename all of the existing qupX_ uart, spi, and i2c nodes to drop the qupX_ prefix. Let's go ahead and rename qup2_i2c5 to i2c21. Under the old name, this was the 5th index under qup2, which starts at index 16. Note that some nodes are moved in the file by this patch to preserve the expected sort order in the file. Signed-off-by: Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/lkml/20221212182314.1902632-1-bmasney@redhat.com/ --- This is a new patch that's introduced in v2. arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 90 ++++++------- .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 120 +++++++++--------- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 +- 3 files changed, 106 insertions(+), 106 deletions(-)