@@ -29,7 +29,7 @@
#include "vi.h"
#include "video.h"
-#define MAX_CID_CONTROLS 1
+#define MAX_CID_CONTROLS 3
/**
* struct tegra_vi_graph_entity - Entity in the video graph
@@ -893,6 +893,12 @@ static int vi_s_ctrl(struct v4l2_ctrl *ctrl)
case V4L2_CID_TEGRA_SYNCPT_TIMEOUT_RETRY:
chan->syncpt_timeout_retry = ctrl->val;
break;
+ case V4L2_CID_HFLIP:
+ chan->hflip = ctrl->val;
+ break;
+ case V4L2_CID_VFLIP:
+ chan->vflip = ctrl->val;
+ break;
default:
return -EINVAL;
}
@@ -964,6 +970,12 @@ static int tegra_channel_setup_ctrl_handler(struct tegra_vi_channel *chan)
v4l2_ctrl_handler_free(&chan->ctrl_handler);
return ret;
}
+
+ if (chan->vi->soc->has_h_v_flip) {
+ v4l2_ctrl_new_std(&chan->ctrl_handler, &vi_ctrl_ops, V4L2_CID_HFLIP, 0, 1, 1, 0);
+ v4l2_ctrl_new_std(&chan->ctrl_handler, &vi_ctrl_ops, V4L2_CID_VFLIP, 0, 1, 1, 0);
+ }
+
#endif
/* setup the controls */
@@ -74,6 +74,7 @@ struct tegra_vi_ops {
* @hw_revision: VI hw_revision
* @vi_max_channels: supported max streaming channels
* @vi_max_clk_hz: VI clock max frequency
+ * @has_h_v_flip: the chip can do H adn V flip, and the driver implements it
*/
struct tegra_vi_soc {
const struct tegra_video_format *video_formats;
@@ -83,6 +84,7 @@ struct tegra_vi_soc {
u32 hw_revision;
unsigned int vi_max_channels;
unsigned int vi_max_clk_hz;
+ bool has_h_v_flip:1;
};
/**
@@ -170,6 +172,9 @@ struct tegra_vi {
* @syncpt_timeout_retry: syncpt timeout retry count for the capture
* @pg_mode: test pattern generator mode (disabled/direct/patch)
* @notifier: V4L2 asynchronous subdevs notifier
+ *
+ * @hflip: Horizontal flip is enabled
+ * @vflip: Vertical flip is enabled
*/
struct tegra_vi_channel {
struct list_head list;
@@ -218,6 +223,9 @@ struct tegra_vi_channel {
enum tegra_vi_pg_mode pg_mode;
struct v4l2_async_notifier notifier;
+
+ bool hflip:1;
+ bool vflip:1;
};
/**
Tegra20 can do horizontal and vertical image flip, but Tegra210 cannot (either the hardware, or this driver). In preparation to adding Tegra20 support, add a flag in struct tegra_vi_soc so the generic vi.c code knows whether the flip controls should be added or not. Also provide a generic implementation that simply sets two flags in the channel struct. The Tegra20 implementation will enable flipping at stream start based on those flags. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> --- No changes in v3 No changes in v2 --- drivers/staging/media/tegra-video/vi.c | 14 +++++++++++++- drivers/staging/media/tegra-video/vi.h | 8 ++++++++ 2 files changed, 21 insertions(+), 1 deletion(-)