| Message ID | 1457920282-14823-1-git-send-email-jun.nie@linaro.org |
|---|---|
| State | New |
| Headers | show |
2016-03-14 9:51 GMT+08:00 Jun Nie <jun.nie@linaro.org>: > make sbsa uart platform driver more generic so that platform > driver code can be reused by ZTE uart platform driver. > > Signed-off-by: Jun Nie <jun.nie@linaro.org> > --- > drivers/tty/serial/amba-pl011.c | 57 +++++++++++++++++++++++++++-------------- > 1 file changed, 38 insertions(+), 19 deletions(-) > > diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c > index 7c198e0..2d1917e 100644 > --- a/drivers/tty/serial/amba-pl011.c > +++ b/drivers/tty/serial/amba-pl011.c > @@ -73,6 +73,9 @@ > #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) > #define UART_DUMMY_DR_RX (1 << 16) > > +static const struct uart_ops amba_pl011_pops; > +static const struct uart_ops sbsa_uart_pops; > + > static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { > [REG_DR] = UART01x_DR, > [REG_FR] = UART01x_FR, > @@ -92,6 +95,7 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { > /* There is by now at least one vendor with differing details, so handle it */ > struct vendor_data { > const u16 *reg_offset; > + const struct uart_ops *uart_pops; > unsigned int ifls; > bool access_32b; > bool oversampling; > @@ -119,13 +123,20 @@ static struct vendor_data vendor_arm = { > .get_fifosize = get_fifosize_arm, > }; > > +static unsigned int get_fifosize_sbsa(struct amba_device *dev) > +{ > + return 32; > +} > + > static struct vendor_data vendor_sbsa = { > .reg_offset = pl011_std_offsets, > + .uart_pops = &sbsa_uart_pops, > .oversampling = false, > .dma_threshold = false, > .cts_event_workaround = false, > .always_enabled = true, > .fixed_options = true, > + .get_fifosize = get_fifosize_sbsa, > }; > > static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { > @@ -189,6 +200,7 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { > > static struct vendor_data vendor_zte __maybe_unused = { > .reg_offset = pl011_zte_offsets, > + .uart_pops = &amba_pl011_pops, > .access_32b = true, > .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, > .get_fifosize = get_fifosize_arm, > @@ -2086,7 +2098,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) > return ret; > } > > -static struct uart_ops amba_pl011_pops = { > +static const struct uart_ops amba_pl011_pops = { > .tx_empty = pl011_tx_empty, > .set_mctrl = pl011_set_mctrl, > .get_mctrl = pl011_get_mctrl, > @@ -2521,10 +2533,12 @@ static int pl011_resume(struct device *dev) > #endif > > static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); > +static const struct of_device_id pl011_uart_plat_of_match[]; > > -static int sbsa_uart_probe(struct platform_device *pdev) > +static int pl011_uart_plat_probe(struct platform_device *pdev) > { > struct uart_amba_port *uap; > + struct vendor_data *vendor; > struct resource *r; > int portnr, ret; > int baudrate; > @@ -2535,11 +2549,15 @@ static int sbsa_uart_probe(struct platform_device *pdev) > */ > if (pdev->dev.of_node) { > struct device_node *np = pdev->dev.of_node; > + const struct of_device_id *of_id = > + of_match_device(pl011_uart_plat_of_match, &pdev->dev); > > ret = of_property_read_u32(np, "current-speed", &baudrate); > if (ret) > return ret; > + vendor = (struct vendor_data *)of_id->data; > } else { > + vendor = &vendor_sbsa; > baudrate = 115200; > } > > @@ -2552,15 +2570,15 @@ static int sbsa_uart_probe(struct platform_device *pdev) > if (!uap) > return -ENOMEM; > > - uap->reg_offset = vendor_sbsa.reg_offset; > - uap->vendor = &vendor_sbsa; > - uap->fifosize = 32; > - uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; > + uap->vendor = vendor; > + uap->reg_offset = vendor->reg_offset; > + uap->fifosize = vendor->get_fifosize(NULL); > + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; > uap->port.irq = platform_get_irq(pdev, 0); > - uap->port.ops = &sbsa_uart_pops; > + uap->port.ops = vendor->uart_pops; > uap->fixed_baud = baudrate; > > - snprintf(uap->type, sizeof(uap->type), "SBSA"); > + snprintf(uap->type, sizeof(uap->type), "PL011 plat"); > > r = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > @@ -2573,7 +2591,7 @@ static int sbsa_uart_probe(struct platform_device *pdev) > return pl011_register_port(uap); > } > > -static int sbsa_uart_remove(struct platform_device *pdev) > +static int pl011_uart_plat_remove(struct platform_device *pdev) > { > struct uart_amba_port *uap = platform_get_drvdata(pdev); > > @@ -2582,11 +2600,12 @@ static int sbsa_uart_remove(struct platform_device *pdev) > return 0; > } > > -static const struct of_device_id sbsa_uart_of_match[] = { > - { .compatible = "arm,sbsa-uart", }, > +static const struct of_device_id pl011_uart_plat_of_match[] = { > + { .compatible = "arm,sbsa-uart", .data = &vendor_sbsa }, > + { .compatible = "zte,zx296702-uart", .data = &vendor_zte }, > {}, > }; > -MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); > +MODULE_DEVICE_TABLE(of, pl011_uart_plat_of_match); > > static const struct acpi_device_id sbsa_uart_acpi_match[] = { > { "ARMH0011", 0 }, > @@ -2594,12 +2613,12 @@ static const struct acpi_device_id sbsa_uart_acpi_match[] = { > }; > MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); > > -static struct platform_driver arm_sbsa_uart_platform_driver = { > - .probe = sbsa_uart_probe, > - .remove = sbsa_uart_remove, > +static struct platform_driver pl011_uart_platform_driver = { > + .probe = pl011_uart_plat_probe, > + .remove = pl011_uart_plat_remove, > .driver = { > - .name = "sbsa-uart", > - .of_match_table = of_match_ptr(sbsa_uart_of_match), > + .name = "uart-pl011-plat", > + .of_match_table = of_match_ptr(pl011_uart_plat_of_match), > .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match), > }, > }; > @@ -2634,14 +2653,14 @@ static int __init pl011_init(void) > { > printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); > > - if (platform_driver_register(&arm_sbsa_uart_platform_driver)) > + if (platform_driver_register(&pl011_uart_platform_driver)) > pr_warn("could not register SBSA UART platform driver\n"); > return amba_driver_register(&pl011_driver); > } > > static void __exit pl011_exit(void) > { > - platform_driver_unregister(&arm_sbsa_uart_platform_driver); > + platform_driver_unregister(&pl011_uart_platform_driver); > amba_driver_unregister(&pl011_driver); > } > > -- > 1.9.1 > Timur & Russell, Could you help have a quick review on these change and share your comments? It is not big change :) Thanks! Jun -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2016-03-22 3:47 GMT+08:00 Timur Tabi <timur@codeaurora.org>: > Jun Nie wrote: > >> - snprintf(uap->type, sizeof(uap->type), "SBSA"); >> + snprintf(uap->type, sizeof(uap->type), "PL011 plat"); > > > I'm not crazy about this. I think you need to add a "const char *name" > field to 'struct vendor_data'. Will address this suggestion in next version patch. How about "PL011 SBSA" "PL011 ZTE" "PL011 ARM rev1" "PL011 ST rev1"? Jun > > -- > Qualcomm Innovation Center, Inc. > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora > Forum, a Linux Foundation collaborative project. -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 7c198e0..2d1917e 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -73,6 +73,9 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) +static const struct uart_ops amba_pl011_pops; +static const struct uart_ops sbsa_uart_pops; + static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { [REG_DR] = UART01x_DR, [REG_FR] = UART01x_FR, @@ -92,6 +95,7 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { const u16 *reg_offset; + const struct uart_ops *uart_pops; unsigned int ifls; bool access_32b; bool oversampling; @@ -119,13 +123,20 @@ static struct vendor_data vendor_arm = { .get_fifosize = get_fifosize_arm, }; +static unsigned int get_fifosize_sbsa(struct amba_device *dev) +{ + return 32; +} + static struct vendor_data vendor_sbsa = { .reg_offset = pl011_std_offsets, + .uart_pops = &sbsa_uart_pops, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, .always_enabled = true, .fixed_options = true, + .get_fifosize = get_fifosize_sbsa, }; static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { @@ -189,6 +200,7 @@ static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { static struct vendor_data vendor_zte __maybe_unused = { .reg_offset = pl011_zte_offsets, + .uart_pops = &amba_pl011_pops, .access_32b = true, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, .get_fifosize = get_fifosize_arm, @@ -2086,7 +2098,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } -static struct uart_ops amba_pl011_pops = { +static const struct uart_ops amba_pl011_pops = { .tx_empty = pl011_tx_empty, .set_mctrl = pl011_set_mctrl, .get_mctrl = pl011_get_mctrl, @@ -2521,10 +2533,12 @@ static int pl011_resume(struct device *dev) #endif static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); +static const struct of_device_id pl011_uart_plat_of_match[]; -static int sbsa_uart_probe(struct platform_device *pdev) +static int pl011_uart_plat_probe(struct platform_device *pdev) { struct uart_amba_port *uap; + struct vendor_data *vendor; struct resource *r; int portnr, ret; int baudrate; @@ -2535,11 +2549,15 @@ static int sbsa_uart_probe(struct platform_device *pdev) */ if (pdev->dev.of_node) { struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(pl011_uart_plat_of_match, &pdev->dev); ret = of_property_read_u32(np, "current-speed", &baudrate); if (ret) return ret; + vendor = (struct vendor_data *)of_id->data; } else { + vendor = &vendor_sbsa; baudrate = 115200; } @@ -2552,15 +2570,15 @@ static int sbsa_uart_probe(struct platform_device *pdev) if (!uap) return -ENOMEM; - uap->reg_offset = vendor_sbsa.reg_offset; - uap->vendor = &vendor_sbsa; - uap->fifosize = 32; - uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM; + uap->vendor = vendor; + uap->reg_offset = vendor->reg_offset; + uap->fifosize = vendor->get_fifosize(NULL); + uap->port.iotype = vendor->access_32b ? UPIO_MEM32 : UPIO_MEM; uap->port.irq = platform_get_irq(pdev, 0); - uap->port.ops = &sbsa_uart_pops; + uap->port.ops = vendor->uart_pops; uap->fixed_baud = baudrate; - snprintf(uap->type, sizeof(uap->type), "SBSA"); + snprintf(uap->type, sizeof(uap->type), "PL011 plat"); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -2573,7 +2591,7 @@ static int sbsa_uart_probe(struct platform_device *pdev) return pl011_register_port(uap); } -static int sbsa_uart_remove(struct platform_device *pdev) +static int pl011_uart_plat_remove(struct platform_device *pdev) { struct uart_amba_port *uap = platform_get_drvdata(pdev); @@ -2582,11 +2600,12 @@ static int sbsa_uart_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id sbsa_uart_of_match[] = { - { .compatible = "arm,sbsa-uart", }, +static const struct of_device_id pl011_uart_plat_of_match[] = { + { .compatible = "arm,sbsa-uart", .data = &vendor_sbsa }, + { .compatible = "zte,zx296702-uart", .data = &vendor_zte }, {}, }; -MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); +MODULE_DEVICE_TABLE(of, pl011_uart_plat_of_match); static const struct acpi_device_id sbsa_uart_acpi_match[] = { { "ARMH0011", 0 }, @@ -2594,12 +2613,12 @@ static const struct acpi_device_id sbsa_uart_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); -static struct platform_driver arm_sbsa_uart_platform_driver = { - .probe = sbsa_uart_probe, - .remove = sbsa_uart_remove, +static struct platform_driver pl011_uart_platform_driver = { + .probe = pl011_uart_plat_probe, + .remove = pl011_uart_plat_remove, .driver = { - .name = "sbsa-uart", - .of_match_table = of_match_ptr(sbsa_uart_of_match), + .name = "uart-pl011-plat", + .of_match_table = of_match_ptr(pl011_uart_plat_of_match), .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match), }, }; @@ -2634,14 +2653,14 @@ static int __init pl011_init(void) { printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); - if (platform_driver_register(&arm_sbsa_uart_platform_driver)) + if (platform_driver_register(&pl011_uart_platform_driver)) pr_warn("could not register SBSA UART platform driver\n"); return amba_driver_register(&pl011_driver); } static void __exit pl011_exit(void) { - platform_driver_unregister(&arm_sbsa_uart_platform_driver); + platform_driver_unregister(&pl011_uart_platform_driver); amba_driver_unregister(&pl011_driver); }
make sbsa uart platform driver more generic so that platform driver code can be reused by ZTE uart platform driver. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- drivers/tty/serial/amba-pl011.c | 57 +++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 19 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-serial" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html