@@ -330,6 +330,7 @@ config ARCH_R9A09G011
bool "ARM64 Platform support for RZ/V2M"
select PM
select PM_GENERIC_DOMAINS
+ select PWC_RZV2M
help
This enables support for the Renesas RZ/V2M SoC.
@@ -345,6 +346,9 @@ config ARCH_R9A07G043
endif # RISCV
+config PWC_RZV2M
+ bool "Renesas RZ/V2M PWC support" if COMPILE_TEST
+
config RST_RCAR
bool "Reset Controller support for R-Car" if COMPILE_TEST
@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_R9A06G032) += r9a06g032-smp.o
endif
# Family
+obj-$(CONFIG_PWC_RZV2M) += pwc-rzv2m.o
obj-$(CONFIG_RST_RCAR) += rcar-rst.o
obj-$(CONFIG_SYSC_RCAR) += rcar-sysc.o
obj-$(CONFIG_SYSC_RCAR_GEN4) += rcar-gen4-sysc.o
new file mode 100644
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 Renesas Electronics Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#define PWC_PWCRST 0x00
+#define PWC_PWCCKEN 0x04
+#define PWC_PWCCTL 0x50
+#define PWC_GPIO 0x80
+
+#define PWC_PWCRST_RSTSOFTAX 0x1
+#define PWC_PWCCKEN_ENGCKMAIN 0x1
+#define PWC_PWCCTL_PWOFF 0x1
+
+struct rzv2m_pwc_priv {
+ void __iomem *base;
+ struct device *dev;
+ struct gpio_chip gp;
+ DECLARE_BITMAP(ch_en_bits, 2);
+};
+
+static void rzv2m_pwc_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct rzv2m_pwc_priv *priv = gpiochip_get_data(chip);
+ u32 reg;
+
+ /* BIT 16 enables write to BIT 0, and BIT 17 enables write to BIT 1 */
+ reg = BIT(offset + 16);
+ if (value)
+ reg |= BIT(offset);
+
+ writel(reg, priv->base + PWC_GPIO);
+
+ assign_bit(offset, priv->ch_en_bits, value);
+}
+
+static int rzv2m_pwc_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct rzv2m_pwc_priv *priv = gpiochip_get_data(chip);
+
+ return test_bit(offset, priv->ch_en_bits);
+}
+
+static int rzv2m_pwc_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int nr, int value)
+{
+ if (nr > 1)
+ return -EINVAL;
+
+ rzv2m_pwc_gpio_set(gc, nr, value);
+
+ return 0;
+}
+
+static const struct gpio_chip rzv2m_pwc_gc = {
+ .label = "gpio_rzv2m_pwc",
+ .owner = THIS_MODULE,
+ .get = rzv2m_pwc_gpio_get,
+ .set = rzv2m_pwc_gpio_set,
+ .direction_output = rzv2m_pwc_gpio_direction_output,
+ .can_sleep = false,
+ .ngpio = 2,
+ .base = -1,
+};
+
+static int rzv2m_pwc_poweroff(struct sys_off_data *data)
+{
+ struct rzv2m_pwc_priv *priv = data->cb_data;
+
+ writel(PWC_PWCRST_RSTSOFTAX, priv->base + PWC_PWCRST);
+ writel(PWC_PWCCKEN_ENGCKMAIN, priv->base + PWC_PWCCKEN);
+ writel(PWC_PWCCTL_PWOFF, priv->base + PWC_PWCCTL);
+
+ mdelay(150);
+
+ dev_err(priv->dev, "Failed to power off the system");
+
+ return NOTIFY_DONE;
+}
+
+static int rzv2m_pwc_probe(struct platform_device *pdev)
+{
+ struct rzv2m_pwc_priv *priv;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ /*
+ * The register used by this driver cannot be read, therefore set the
+ * outputs to their default values and initialize priv->ch_en_bits
+ * accordingly. BIT 16 enables write to BIT 0, BIT 17 enables write to
+ * BIT 1, and the default value of both BIT 0 and BIT 1 is 0.
+ */
+ writel(BIT(17) | BIT(16), priv->base + PWC_GPIO);
+ bitmap_zero(priv->ch_en_bits, 2);
+
+ priv->gp = rzv2m_pwc_gc;
+ priv->gp.parent = pdev->dev.parent;
+ priv->gp.fwnode = dev_fwnode(&pdev->dev);
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &priv->gp, priv);
+ if (ret)
+ return ret;
+
+ if (device_property_read_bool(&pdev->dev, "renesas,rzv2m-pwc-power"))
+ ret = devm_register_power_off_handler(&pdev->dev,
+ rzv2m_pwc_poweroff, priv);
+
+ return ret;
+}
+
+static const struct of_device_id rzv2m_pwc_of_match[] = {
+ { .compatible = "renesas,rzv2m-pwc" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzv2m_pwc_of_match);
+
+static struct platform_driver rzv2m_pwc_driver = {
+ .probe = rzv2m_pwc_probe,
+ .driver = {
+ .name = "rzv2m_pwc",
+ .of_match_table = of_match_ptr(rzv2m_pwc_of_match),
+ },
+};
+module_platform_driver(rzv2m_pwc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Fabrizio Castro <castro.fabrizio.jz@renesas.com>");
+MODULE_DESCRIPTION("Renesas RZ/V2M PWC driver");
The Renesas RZ/V2M External Power Sequence Controller (PWC) IP is capable of: * external power supply on/off sequence generation * on/off signal generation for the LPDDR4 core power supply (LPVDD) * key input signals processing * general-purpose output pins Add the corresponding device driver. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> --- v1: In the first version, I had 1 driver for GPIO handling, and 1 driver for poweroff handling, both based on syscon to share the mapped memory region. v2: One more driver added to act as MFD core driver. Dropped syscon, and dropped the OF compatible string for the GPIO and poweroff drivers. v3: This new patch merges all the PWC code in 1 new driver. It also takes into account the comments received from Bartosz and Geert. Since this is a new driver, I have dropped all the Reviewed-by tags received on the separated drivers. v4: No change. drivers/soc/renesas/Kconfig | 4 + drivers/soc/renesas/Makefile | 1 + drivers/soc/renesas/pwc-rzv2m.c | 141 ++++++++++++++++++++++++++++++++ 3 files changed, 146 insertions(+) create mode 100644 drivers/soc/renesas/pwc-rzv2m.c