diff mbox series

[v2] ASoC: SOF: ipc4-topology: use different channel mask for each sdw amp feedback

Message ID 20230125141317.30302-1-peter.ujfalusi@linux.intel.com
State Superseded
Headers show
Series [v2] ASoC: SOF: ipc4-topology: use different channel mask for each sdw amp feedback | expand

Commit Message

Peter Ujfalusi Jan. 25, 2023, 2:13 p.m. UTC 
From: Bard Liao <yung-chuan.liao@linux.intel.com>

Currently, we use the same channel mask for aggregated speakers.
It works fine for playback because we duplicate the audio data for all
aggregated speakers. But we need to get audio data from each aggregated
speaker and combine them to the captured audio. So we need to set
non-overlapping channel mask for aggregated ALH DAIs.

Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
Hi,

Changes since v1:
- Correct the patch subject line

Regards,
Peter

 sound/soc/sof/ipc4-topology.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

Comments

Mark Brown Jan. 26, 2023, 5:09 p.m. UTC | #1 
On Wed, 25 Jan 2023 16:13:17 +0200, Peter Ujfalusi wrote:
> Currently, we use the same channel mask for aggregated speakers.
> It works fine for playback because we duplicate the audio data for all
> aggregated speakers. But we need to get audio data from each aggregated
> speaker and combine them to the captured audio. So we need to set
> non-overlapping channel mask for aggregated ALH DAIs.
> 
> 
> [...]

Applied to

   broonie/sound.git for-next

Thanks!

[1/1] ASoC: SOF: ipc4-topology: use different channel mask for each sdw amp feedback
      commit: 0390a102cc18cb7456d6c1f15ac51f1af90fcf9c

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/sound/soc/sof/ipc4-topology.c b/sound/soc/sof/ipc4-topology.c
index 59f4d42f9011..34586cbb461f 100644
--- a/sound/soc/sof/ipc4-topology.c
+++ b/sound/soc/sof/ipc4-topology.c
@@ -1203,8 +1203,11 @@  sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
 			struct sof_ipc4_copier_data *alh_data;
 			struct sof_ipc4_copier *alh_copier;
 			struct snd_sof_widget *w;
+			u32 ch_count = 0;
 			u32 ch_mask = 0;
 			u32 ch_map;
+			u32 step;
+			u32 mask;
 			int i;
 
 			blob = (struct sof_ipc4_alh_configuration_blob *)ipc4_copier->copier_config;
@@ -1214,11 +1217,15 @@  sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
 			/* Get channel_mask from ch_map */
 			ch_map = copier_data->base_config.audio_fmt.ch_map;
 			for (i = 0; ch_map; i++) {
-				if ((ch_map & 0xf) != 0xf)
+				if ((ch_map & 0xf) != 0xf) {
 					ch_mask |= BIT(i);
+					ch_count++;
+				}
 				ch_map >>= 4;
 			}
 
+			step = ch_count / blob->alh_cfg.count;
+			mask =  GENMASK(step - 1, 0);
 			/*
 			 * Set each gtw_cfg.node_id to blob->alh_cfg.mapping[]
 			 * for all widgets with the same stream name
@@ -1233,7 +1240,22 @@  sof_ipc4_prepare_copier_module(struct snd_sof_widget *swidget,
 				alh_copier = (struct sof_ipc4_copier *)dai->private;
 				alh_data = &alh_copier->data;
 				blob->alh_cfg.mapping[i].alh_id = alh_data->gtw_cfg.node_id;
-				blob->alh_cfg.mapping[i].channel_mask = ch_mask;
+				/*
+				 * Set the same channel mask for playback as the audio data is
+				 * duplicated for all speakers. For capture, split the channels
+				 * among the aggregated DAIs. For example, with 4 channels on 2
+				 * aggregated DAIs, the channel_mask should be 0x3 and 0xc for the
+				 * two DAI's.
+				 * The channel masks used depend on the cpu_dais used in the
+				 * dailink at the machine driver level, which actually comes from
+				 * the tables in soc_acpi files depending on the _ADR and devID
+				 * registers for each codec.
+				 */
+				if (w->id == snd_soc_dapm_dai_in)
+					blob->alh_cfg.mapping[i].channel_mask = ch_mask;
+				else
+					blob->alh_cfg.mapping[i].channel_mask = mask << (step * i);
+
 				i++;
 			}
 			if (blob->alh_cfg.count > 1) {