diff mbox series

[v4,2/2] dt-bindings: display: simple-framebuffer: Document the panel node

Message ID 20230126182435.70544-3-rayyan@ansari.sh
State Accepted
Commit 859af8cb5ec39cfa28629002d8e99eb68d242178
Headers show
Series SimpleDRM: allow configuring physical width and height | expand

Commit Message

Rayyan Ansari Jan. 26, 2023, 6:24 p.m. UTC 
Document the new panel node and what it is used for.

Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
---
 .../devicetree/bindings/display/simple-framebuffer.yaml  | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index dd64f70b5014..4e10a100b6c8 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -26,6 +26,11 @@  description: |+
   over control to a driver for the real hardware. The bindings for the
   hw nodes must specify which node is considered the primary node.
 
+  If a panel node is given, then the driver uses this to configure the
+  physical width and height of the display. If no panel node is given,
+  then the driver uses the width and height properties of the simplefb
+  node to estimate it.
+
   It is advised to add display# aliases to help the OS determine how
   to number things. If display# aliases are used, then if the simplefb
   node contains a display property then the /aliases/display# path
@@ -110,6 +115,10 @@  properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Primary display hardware node
 
+  panel:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Display panel node
+
   allwinner,pipeline:
     description: Pipeline used by the framebuffer on Allwinner SoCs
     enum: