diff mbox

gpio: samsung: adapt to changes in gpio specifier translator function declaration

Message ID 1328101352-22274-1-git-send-email-thomas.abraham@linaro.org
State New
Headers show

Commit Message

thomas.abraham@linaro.org Feb. 1, 2012, 1:02 p.m. UTC
Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle
parsing data) modifies the parameter list of of_xlate function pointer declaration
in gpio_chip. Adapt the gpio specifier translate function for this change.

Reported-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
 drivers/gpio/gpio-samsung.c |   23 +++++++++++++----------
 1 files changed, 13 insertions(+), 10 deletions(-)

Comments

Karol Lewandowski Feb. 1, 2012, 6:26 p.m. UTC | #1
On 01.02.2012 14:02, Thomas Abraham wrote:
> Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle
> parsing data) modifies the parameter list of of_xlate function pointer declaration
> in gpio_chip. Adapt the gpio specifier translate function for this change.
>
> Reported-by: Tushar Behera<tushar.behera@linaro.org>
> Signed-off-by: Thomas Abraham<thomas.abraham@linaro.org>

Tested-by: Karol Lewandowski <k.lewandowsk@samsung.com>

Fixes following Oops in i2c-s3c24xx.

Thanks


<1>Unable to handle kernel NULL pointer dereference at virtual address 
00000000
<1>pgd = c0004000
<1>[00000000] *pgd=00000000
<0>Internal error: Oops: 5 [#1] PREEMPT SMP
<d>Modules linked in:
CPU: 0    Tainted: G        W     (3.3.0-rc1+ #20)
PC is at exynos4_gpio_xlate+0x18/0xe8
LR is at of_get_named_gpio_flags+0xd0/0x190
pc : [<c025dd60>]    lr : [<c03423a0>]    psr: 60000013
sp : e9047d88  ip : e9047da8  fp : e9047da4
r10: 00000000  r9 : 00000000  r8 : c05ecf4c
r7 : c0864ca8  r6 : 00000000  r5 : e9047db0  r4 : c025dd48
r3 : 00000004  r2 : 00000000  r1 : e9047db0  r0 : c05ecf4c
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c53c7d  Table: 4000404a  DAC: 00000015
<0>Process swapper/0 (pid: 1, stack limit = 0xe90462f0)
<0>Stack: (0xe9047d88 to 0xe9048000)
...
[<c025dd60>] (exynos4_gpio_xlate+0x18/0xe8) from [<c03423a0>] 
(of_get_named_gpio_flags+0xd0/0x190)
[<c03423a0>] (of_get_named_gpio_flags+0xd0/0x190) from [<c02e77cc>] 
(s3c24xx_i2c_init+0x264/0x430)
[<c02e77cc>] (s3c24xx_i2c_init+0x264/0x430) from [<c02e7c24>] 
(s3c24xx_i2c_probe+0x1c8/0x4ac)
[<c02e7c24>] (s3c24xx_i2c_probe+0x1c8/0x4ac) from [<c02a4320>] 
(platform_drv_probe+0x28/0x2c)
Grant Likely Feb. 2, 2012, 12:05 a.m. UTC | #2
On Wed, Feb 01, 2012 at 06:32:32PM +0530, Thomas Abraham wrote:
> Commit 15c9a0acc3f7 (of: create of_phandle_args to simplify return of phandle
> parsing data) modifies the parameter list of of_xlate function pointer declaration
> in gpio_chip. Adapt the gpio specifier translate function for this change.
> 
> Reported-by: Tushar Behera <tushar.behera@linaro.org>
> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>

Applied, thanks.

g.
diff mbox

Patch

diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index a766177..0a79a11 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -2387,27 +2387,30 @@  static struct samsung_gpio_chip exynos4_gpios_3[] = {
 };
 
 #if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
-static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
-			      const void *gpio_spec, u32 *flags)
+static int exynos4_gpio_xlate(struct gpio_chip *gc,
+			const struct of_phandle_args *gpiospec, u32 *flags)
 {
-	const __be32 *gpio = gpio_spec;
-	const u32 n = be32_to_cpup(gpio);
-	unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+	unsigned int pin;
 
 	if (WARN_ON(gc->of_gpio_n_cells < 4))
 		return -EINVAL;
 
-	if (n > gc->ngpio)
+	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
 		return -EINVAL;
 
-	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+	if (gpiospec->args[0] > gc->ngpio)
+		return -EINVAL;
+
+	pin = gc->base + gpiospec->args[0];
+
+	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
 		pr_warn("gpio_xlate: failed to set pin function\n");
-	if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+	if (s3c_gpio_setpull(pin, gpiospec->args[2]))
 		pr_warn("gpio_xlate: failed to set pin pull up/down\n");
-	if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+	if (s5p_gpio_set_drvstr(pin, gpiospec->args[3]))
 		pr_warn("gpio_xlate: failed to set pin drive strength\n");
 
-	return n;
+	return gpiospec->args[0];
 }
 
 static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {