@@ -4,17 +4,70 @@
$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-hsspi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Broadcom BCM6328 High Speed SPI controller
+title: Broadcom Broadband SoC High Speed SPI controller
maintainers:
+ - William Zhang <william.zhang@broadcom.com>
+ - Kursad Oney <kursad.oney@broadcom.com>
- Jonas Gorski <jonas.gorski@gmail.com>
+description: |
+ Broadcom Broadband SoC supports High Speed SPI master controller since the
+ early MIPS based chips such as BCM6328 and BCM63268. This initial rev 1.0
+ controller was carried over to recent ARM based chips, such as BCM63138,
+ BCM4908 and BCM6858. The old MIPS based chip should continue to use the
+ brcm,bcm6328-hsspi compatible string. The recent ARM based chip is required to
+ use the brcm,bcmbca-hsspi-v1.0 as part of its compatible string list as
+ defined below to match the specific chip along with ip revision info.
+
+ This rev 1.0 controller has a limitation that can not keep the chip select line
+ active between the SPI transfers within the same SPI message. This can
+ terminate the transaction to some SPI devices prematurely. The issue can be
+ worked around by either the controller's prepend mode or using the dummy chip
+ select workaround. Driver automatically picks the suitable mode based on
+ transfer type so it is transparent to the user.
+
+ The newer SoCs such as BCM6756, BCM4912 and BCM6855 include an updated SPI
+ controller rev 1.1 that add the capability to allow the driver to control chip
+ select explicitly. This solves the issue in the old controller.
+
properties:
compatible:
- const: brcm,bcm6328-hsspi
+ oneOf:
+ - const: brcm,bcm6328-hsspi
+ - items:
+ - enum:
+ - brcm,bcm47622-hsspi
+ - brcm,bcm4908-hsspi
+ - brcm,bcm63138-hsspi
+ - brcm,bcm63146-hsspi
+ - brcm,bcm63148-hsspi
+ - brcm,bcm63158-hsspi
+ - brcm,bcm63178-hsspi
+ - brcm,bcm6846-hsspi
+ - brcm,bcm6856-hsspi
+ - brcm,bcm6858-hsspi
+ - brcm,bcm6878-hsspi
+ - const: brcm,bcmbca-hsspi-v1.0
+ - items:
+ - enum:
+ - brcm,bcm4912-hsspi
+ - brcm,bcm6756-hsspi
+ - brcm,bcm6813-hsspi
+ - brcm,bcm6855-hsspi
+ - const: brcm,bcmbca-hsspi-v1.1
reg:
- maxItems: 1
+ items:
+ - description: main registers
+ - description: miscellaneous control registers
+ minItems: 1
+
+ reg-names:
+ items:
+ - const: hsspi
+ - const: spim-ctrl
+ minItems: 1
clocks:
items:
@@ -38,18 +91,44 @@ required:
allOf:
- $ref: spi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,bcm6328-hsspi
+ - brcm,bcmbca-hsspi-v1.0
+ then:
+ properties:
+ reg:
+ maxItems: 1
+ reg-names:
+ maxItems: 1
+ else:
+ properties:
+ reg:
+ minItems: 2
+ maxItems: 2
+ reg-names:
+ minItems: 2
+ maxItems: 2
+ required:
+ - reg-names
unevaluatedProperties: false
examples:
- |
- spi@10001000 {
- compatible = "brcm,bcm6328-hsspi";
- reg = <0x10001000 0x600>;
- interrupts = <29>;
- clocks = <&clkctl 9>, <&hsspi_pll>;
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ spi@ff801000 {
+ compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+ reg = <0xff801000 0x1000>,
+ <0xff802610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi>, <&hsspi_pll>;
clock-names = "hsspi", "pll";
- num-cs = <2>;
+ num-cs = <8>;
#address-cells = <1>;
#size-cells = <0>;
};