| Message ID | 20230221150543.283487-3-brgl@bgdev.pl |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: qcom: sa8775p: enable cpufreq | expand |
On 21.02.2023 16:05, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add a node for the cpufreq engine and specify the frequency domains for > all CPUs. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- > arch/arm64/boot/dts/qcom/sa8775p.dtsi | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > index ce5976e36aee..5e2bc67b3178 100644 > --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi > +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi > @@ -37,6 +37,7 @@ CPU0: cpu@0 { > compatible = "qcom,kryo"; > reg = <0x0 0x0>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_0>; > L2_0: l2-cache { > compatible = "cache"; > @@ -52,6 +53,7 @@ CPU1: cpu@100 { > compatible = "qcom,kryo"; > reg = <0x0 0x100>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_1>; > L2_1: l2-cache { > compatible = "cache"; > @@ -64,6 +66,7 @@ CPU2: cpu@200 { > compatible = "qcom,kryo"; > reg = <0x0 0x200>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_2>; > L2_2: l2-cache { > compatible = "cache"; > @@ -76,6 +79,7 @@ CPU3: cpu@300 { > compatible = "qcom,kryo"; > reg = <0x0 0x300>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 0>; > next-level-cache = <&L2_3>; > L2_3: l2-cache { > compatible = "cache"; > @@ -88,6 +92,7 @@ CPU4: cpu@10000 { > compatible = "qcom,kryo"; > reg = <0x0 0x10000>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_4>; > L2_4: l2-cache { > compatible = "cache"; > @@ -104,6 +109,7 @@ CPU5: cpu@10100 { > compatible = "qcom,kryo"; > reg = <0x0 0x10100>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_5>; > L2_5: l2-cache { > compatible = "cache"; > @@ -116,6 +122,7 @@ CPU6: cpu@10200 { > compatible = "qcom,kryo"; > reg = <0x0 0x10200>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_6>; > L2_6: l2-cache { > compatible = "cache"; > @@ -128,6 +135,7 @@ CPU7: cpu@10300 { > compatible = "qcom,kryo"; > reg = <0x0 0x10300>; > enable-method = "psci"; > + qcom,freq-domain = <&cpufreq_hw 1>; > next-level-cache = <&L2_7>; > L2_7: l2-cache { > compatible = "cache"; > @@ -731,6 +739,19 @@ tcsr_mutex: hwlock@1f40000 { > #hwlock-cells = <1>; > }; > > + cpufreq_hw: cpufreq@18591000 { > + compatible = "qcom,sa8775p-cpufreq-epss", > + "qcom,cpufreq-epss"; That's some very aggressive wrapping! :P Nevertheless, Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > + reg = <0x0 0x18591000 0x0 0x1000>, > + <0x0 0x18593000 0x0 0x1000>; > + reg-names = "freq-domain0", "freq-domain1"; > + > + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; > + clock-names = "xo", "alternate"; > + > + #freq-domain-cells = <1>; > + }; > + > tlmm: pinctrl@f000000 { > compatible = "qcom,sa8775p-tlmm"; > reg = <0x0 0xf000000 0x0 0x1000000>;
On Tue, Feb 21, 2023 at 4:05 PM Bartosz Golaszewski <brgl@bgdev.pl> wrote: > > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add a node for the cpufreq engine and specify the frequency domains for > all CPUs. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- Bjorn, Viresh picked up the dt-bindings, so this is the only thing left to go into the qcom tree. Bartosz
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index ce5976e36aee..5e2bc67b3178 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -37,6 +37,7 @@ CPU0: cpu@0 { compatible = "qcom,kryo"; reg = <0x0 0x0>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -52,6 +53,7 @@ CPU1: cpu@100 { compatible = "qcom,kryo"; reg = <0x0 0x100>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; @@ -64,6 +66,7 @@ CPU2: cpu@200 { compatible = "qcom,kryo"; reg = <0x0 0x200>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_2>; L2_2: l2-cache { compatible = "cache"; @@ -76,6 +79,7 @@ CPU3: cpu@300 { compatible = "qcom,kryo"; reg = <0x0 0x300>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 0>; next-level-cache = <&L2_3>; L2_3: l2-cache { compatible = "cache"; @@ -88,6 +92,7 @@ CPU4: cpu@10000 { compatible = "qcom,kryo"; reg = <0x0 0x10000>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_4>; L2_4: l2-cache { compatible = "cache"; @@ -104,6 +109,7 @@ CPU5: cpu@10100 { compatible = "qcom,kryo"; reg = <0x0 0x10100>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_5>; L2_5: l2-cache { compatible = "cache"; @@ -116,6 +122,7 @@ CPU6: cpu@10200 { compatible = "qcom,kryo"; reg = <0x0 0x10200>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_6>; L2_6: l2-cache { compatible = "cache"; @@ -128,6 +135,7 @@ CPU7: cpu@10300 { compatible = "qcom,kryo"; reg = <0x0 0x10300>; enable-method = "psci"; + qcom,freq-domain = <&cpufreq_hw 1>; next-level-cache = <&L2_7>; L2_7: l2-cache { compatible = "cache"; @@ -731,6 +739,19 @@ tcsr_mutex: hwlock@1f40000 { #hwlock-cells = <1>; }; + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sa8775p-cpufreq-epss", + "qcom,cpufreq-epss"; + reg = <0x0 0x18591000 0x0 0x1000>, + <0x0 0x18593000 0x0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + tlmm: pinctrl@f000000 { compatible = "qcom,sa8775p-tlmm"; reg = <0x0 0xf000000 0x0 0x1000000>;