@@ -306,15 +306,10 @@ static int mchp_spdiftx_trigger(struct snd_pcm_substream *substream, int cmd,
{
struct mchp_spdiftx_dev *dev = snd_soc_dai_get_drvdata(dai);
struct mchp_spdiftx_mixer_control *ctrl = &dev->control;
- u32 mr;
- int running;
int ret;
/* do not start/stop while channel status or user data is updated */
spin_lock(&ctrl->lock);
- regmap_read(dev->regmap, SPDIFTX_MR, &mr);
- running = !!(mr & SPDIFTX_MR_TXEN_ENABLE);
-
switch (cmd) {
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_START:
@@ -323,10 +318,8 @@ static int mchp_spdiftx_trigger(struct snd_pcm_substream *substream, int cmd,
dev->suspend_irq = 0;
fallthrough;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if (!running) {
- mr &= ~SPDIFTX_MR_TXEN_MASK;
- mr |= SPDIFTX_MR_TXEN_ENABLE;
- }
+ ret = regmap_update_bits(dev->regmap, SPDIFTX_MR, SPDIFTX_MR_TXEN_MASK,
+ SPDIFTX_MR_TXEN_ENABLE);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
regmap_read(dev->regmap, SPDIFTX_IMR, &dev->suspend_irq);
@@ -336,17 +329,12 @@ static int mchp_spdiftx_trigger(struct snd_pcm_substream *substream, int cmd,
SPDIFTX_IR_TXUDR | SPDIFTX_IR_TXOVR);
fallthrough;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (running) {
- mr &= ~SPDIFTX_MR_TXEN_MASK;
- mr |= SPDIFTX_MR_TXEN_DISABLE;
- }
+ ret = regmap_update_bits(dev->regmap, SPDIFTX_MR, SPDIFTX_MR_TXEN_MASK,
+ SPDIFTX_MR_TXEN_DISABLE);
break;
default:
- spin_unlock(&ctrl->lock);
- return -EINVAL;
+ ret = -EINVAL;
}
-
- ret = regmap_write(dev->regmap, SPDIFTX_MR, mr);
spin_unlock(&ctrl->lock);
if (ret)
dev_err(dev->dev, "unable to disable TX: %d\n", ret);
Use regmap_update_bits() instead of regmap_read(), running variable, regmap_write(). There is no need for extra variables and checks around it as regmap_update_bits() already does this. With this code becomes simpler. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- sound/soc/atmel/mchp-spdiftx.c | 22 +++++----------------- 1 file changed, 5 insertions(+), 17 deletions(-)