@@ -6038,6 +6038,25 @@ ieee80211_frequency_to_channel(int freq)
struct ieee80211_channel *
ieee80211_get_channel_khz(struct wiphy *wiphy, u32 freq);
+/**
+ * ieee80211_ap_reg_power_to_reg_power_mode - convert AP specific 6 GHz power
+ * type into combined 6 GHz power type
+ * @ap_type: AP's power mode
+ * Return: Power mode as referenced in &enum nl80211_regulatory_power_modes
+ */
+enum nl80211_regulatory_power_modes
+ieee80211_ap_reg_power_to_reg_power_mode(enum ieee80211_ap_reg_power ap_type);
+
+/**
+ * ieee80211_client_reg_power_to_reg_power_mode - convert Client specific 6 GHz
+ * power type into combined 6 GHz power type
+ * @client_type: Client's power mode
+ * @ap_type: AP's power mode to which this client is associating
+ * Return: Power mode as referenced in &enum nl80211_regulatory_power_modes
+ */
+enum nl80211_regulatory_power_modes
+ieee80211_client_reg_power_to_reg_power_mode(enum ieee80211_client_reg_power client_type,
+ enum ieee80211_ap_reg_power ap_type);
/**
* ieee80211_get_channel - get channel struct from wiphy for specified frequency
*
@@ -4053,6 +4053,44 @@ enum nl80211_band_attr {
#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
+/**
+ * enum nl80211_regulatory_power_modes - 6 GHz regulatory power
+ * modes
+ * @NL80211_REG_PWR_MODE_AP_SP: Low Power Indoor (Access Point)
+ * @NL80211_REG_PWR_MODE_AP_SP: Standard Power (Access Point)
+ * @NL80211_REG_PWR_MODE_AP_VLP: Very Low Power (Access Point)
+ * @NL80211_REG_PWR_MODE_REGULAR_CLIENT_LPI: Low Power Indoor (Regular
+ * or Default Client)
+ * @NL80211_REG_PWR_MODE_REGULAR_CLIENT_SP: Standard Power (Regular
+ * or Default Client)
+ * @NL80211_REG_PWR_MODE_REGULAR_CLIENT_VLP: Very Low Power (Regular
+ * or Default Client)
+ * @NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_LPI: Low Power Indoor
+ * (Subordinate Client)
+ * @NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_SP: Standard Power
+ * (Subordinate Client)
+ * @NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_VLP: Very Low Power
+ * (Subordinate Client)
+ * @__NL80211_REG_PWR_MODE_LAST: Internal use
+ * @NL80211_REG_PWR_MODE_MAX: Max supported number of power
+ * modes
+ */
+enum nl80211_regulatory_power_modes {
+ NL80211_REG_PWR_MODE_AP_LPI,
+ NL80211_REG_PWR_MODE_AP_SP,
+ NL80211_REG_PWR_MODE_AP_VLP,
+ NL80211_REG_PWR_MODE_REGULAR_CLIENT_LPI,
+ NL80211_REG_PWR_MODE_REGULAR_CLIENT_SP,
+ NL80211_REG_PWR_MODE_REGULAR_CLIENT_VLP,
+ NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_LPI,
+ NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_SP,
+ NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_VLP,
+
+ /* keep last */
+ __NL80211_REG_PWR_MODE_LAST,
+ NL80211_REG_PWR_MODE_MAX = __NL80211_REG_PWR_MODE_LAST,
+};
+
/**
* enum nl80211_wmm_rule - regulatory wmm rule
*
@@ -190,6 +190,66 @@ struct ieee80211_channel *ieee80211_get_channel_khz(struct wiphy *wiphy,
}
EXPORT_SYMBOL(ieee80211_get_channel_khz);
+enum nl80211_regulatory_power_modes
+ieee80211_ap_reg_power_to_reg_power_mode(enum ieee80211_ap_reg_power ap_type)
+{
+ switch (ap_type) {
+ case IEEE80211_REG_LPI_AP:
+ return NL80211_REG_PWR_MODE_AP_LPI;
+ case IEEE80211_REG_SP_AP:
+ return NL80211_REG_PWR_MODE_AP_SP;
+ case IEEE80211_REG_VLP_AP:
+ return NL80211_REG_PWR_MODE_AP_VLP;
+ default:
+ return NL80211_REG_PWR_MODE_MAX;
+ }
+}
+EXPORT_SYMBOL(ieee80211_ap_reg_power_to_reg_power_mode);
+
+/* ieee80211_client_reg_power_to_reg_power_mode: Accepts the individual power type of
+ * a 6 GHz client and power type of AP to which the client is associating and returns
+ * the final combined power mode as enumerated in &enum nl80211_regulatory_power_modes.
+ *
+ * Unlike AP, for client there is no direct mapping because final power mode of
+ * operation of client is dependent upon the power type of AP.
+ * For example -
+ * If client is a Regular client and AP is Low Power Indoor then combined power mode
+ * will be Regular Low Power Indoor where as if AP is Standard Power, then it will be
+ * Regular Standard Power Mode.
+ */
+enum nl80211_regulatory_power_modes
+ieee80211_client_reg_power_to_reg_power_mode(enum ieee80211_client_reg_power client_type,
+ enum ieee80211_ap_reg_power ap_type)
+{
+ switch (client_type) {
+ case IEEE80211_REG_DEFAULT_CLIENT:
+ switch (ap_type) {
+ case IEEE80211_REG_LPI_AP:
+ return NL80211_REG_PWR_MODE_REGULAR_CLIENT_LPI;
+ case IEEE80211_REG_SP_AP:
+ return NL80211_REG_PWR_MODE_REGULAR_CLIENT_SP;
+ case IEEE80211_REG_VLP_AP:
+ return NL80211_REG_PWR_MODE_REGULAR_CLIENT_VLP;
+ default:
+ return NL80211_REG_PWR_MODE_MAX;
+ }
+ case IEEE80211_REG_SUBORDINATE_CLIENT:
+ switch (ap_type) {
+ case IEEE80211_REG_LPI_AP:
+ return NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_LPI;
+ case IEEE80211_REG_SP_AP:
+ return NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_SP;
+ case IEEE80211_REG_VLP_AP:
+ return NL80211_REG_PWR_MODE_SUBORDINATE_CLIENT_VLP;
+ default:
+ return NL80211_REG_PWR_MODE_MAX;
+ }
+ default:
+ return NL80211_REG_PWR_MODE_MAX;
+ }
+}
+EXPORT_SYMBOL(ieee80211_client_reg_power_to_reg_power_mode);
+
static void set_mandatory_flags_band(struct ieee80211_supported_band *sband)
{
int i, want;
6 GHz regulatory domain introduces different power modes for 6 GHz AP operation - Low Power Indoor(LPI), Standard Power(SP) and Very Low Power(VLP). 6 GHz STAs could be operated as either Regular or Subordinate clients. We have separate definitions of AP and client. However, during concurrency (multi-interfaces), it would be difficult to keep different enum containers for different interface types in order to track its power mode. Add new combined power type definition for 6 GHz interfaces. Also add support to convert existing AP/Client Power type to this new combined power type enum. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> --- include/net/cfg80211.h | 19 ++++++++++++ include/uapi/linux/nl80211.h | 38 +++++++++++++++++++++++ net/wireless/util.c | 60 ++++++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+)