diff mbox series

[RFT,v2,07/14] clk: qcom: smd-rpm: Make __DEFINE_CLK_SMD_RPM_PREFIX accept flags

Message ID 20230303-topic-rpmcc_sleep-v2-7-ae80a325fe94@linaro.org
State New
Headers show
Series SMD RPMCC sleep preparations | expand

Commit Message

Konrad Dybcio March 8, 2023, 9:35 p.m. UTC 
In preparation for supporting keepalive clocks which can never be shut off
(as the platform would fall apart otherwise), make the
__DEFINE_CLK_SMD_RPM_PREFIX macro accept clock flags for the active-only
clock.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/clk/qcom/clk-smd-rpm.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Comments

Dmitry Baryshkov March 9, 2023, 12:50 a.m. UTC | #1 
On 08/03/2023 23:35, Konrad Dybcio wrote:
> In preparation for supporting keepalive clocks which can never be shut off
> (as the platform would fall apart otherwise), make the
> __DEFINE_CLK_SMD_RPM_PREFIX macro accept clock flags for the active-only
> clock.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/clk/qcom/clk-smd-rpm.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 9dc779360ada..ddb4268ba2a5 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -26,7 +26,7 @@ 
 #define QCOM_RPM_SCALING_ENABLE_ID			0x2
 
 #define __DEFINE_CLK_SMD_RPM_PREFIX(_prefix, _name, _active,		      \
-				    type, r_id, key)			      \
+				    type, r_id, key, ao_flags)		      \
 	static struct clk_smd_rpm clk_smd_rpm_##_prefix##_active;	      \
 	static struct clk_smd_rpm clk_smd_rpm_##_prefix##_name = {	      \
 		.rpm_res_type = (type),					      \
@@ -58,13 +58,14 @@ 
 					.fw_name = "xo",		      \
 					.name = "xo_board",		      \
 			},						      \
+			.flags = (ao_flags),				      \
 			.num_parents = 1,				      \
 		},							      \
 	}
 
 #define __DEFINE_CLK_SMD_RPM(_name, _active, type, r_id, key)		      \
 	__DEFINE_CLK_SMD_RPM_PREFIX(/* empty */, _name, _active,	      \
-				    type, r_id, key)
+				    type, r_id, key, 0)
 
 #define __DEFINE_CLK_SMD_RPM_BRANCH_PREFIX(_prefix, _name, _active,\
 					   type, r_id, r, key, ao_flags)      \
@@ -117,7 +118,7 @@ 
 #define DEFINE_CLK_SMD_RPM_BUS(_name, r_id)				      \
 		__DEFINE_CLK_SMD_RPM_PREFIX(bus_##r_id##_,		      \
 		_name##_clk, _name##_a_clk, QCOM_SMD_RPM_BUS_CLK, r_id,	      \
-		QCOM_RPM_SMD_KEY_RATE)
+		QCOM_RPM_SMD_KEY_RATE, 0)
 
 #define DEFINE_CLK_SMD_RPM_CLK_SRC(_name, type, r_id)			      \
 		__DEFINE_CLK_SMD_RPM(					      \