@@ -207,6 +207,23 @@ static int calibrate_8974(struct tsens_priv *priv)
return 0;
}
+static int __init init_8909(struct tsens_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->num_sensors; ++i)
+ priv->sensor[i].slope = 3000;
+
+ priv->sensor[1].p1_calib_offset = -10;
+ priv->sensor[1].p2_calib_offset = -6;
+ priv->sensor[3].p1_calib_offset = -9;
+ priv->sensor[3].p2_calib_offset = -9;
+ priv->sensor[4].p1_calib_offset = -8;
+ priv->sensor[4].p2_calib_offset = -10;
+
+ return init_common(priv);
+}
+
static int __init init_8939(struct tsens_priv *priv) {
priv->sensor[0].slope = 2911;
priv->sensor[1].slope = 2789;
@@ -243,7 +260,7 @@ static int __init init_9607(struct tsens_priv *priv)
return init_common(priv);
}
-/* v0.1: 8916, 8939, 8974, 9607 */
+/* v0.1: 8909, 8916, 8939, 8974, 9607 */
static struct tsens_features tsens_v0_1_feat = {
.ver_major = VER_0_1,
@@ -298,6 +315,19 @@ static const struct tsens_ops ops_v0_1 = {
.get_temp = get_temp_common,
};
+static const struct tsens_ops ops_8909 = {
+ .init = init_8909,
+ .calibrate = tsens_calibrate_common,
+ .get_temp = get_temp_common,
+};
+
+struct tsens_plat_data data_8909 = {
+ .num_sensors = 5,
+ .ops = &ops_8909,
+ .feat = &tsens_v0_1_feat,
+ .fields = tsens_v0_1_regfields,
+};
+
static const struct tsens_ops ops_8916 = {
.init = init_common,
.calibrate = calibrate_8916,
@@ -1109,6 +1109,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,mdm9607-tsens",
.data = &data_9607,
+ }, {
+ .compatible = "qcom,msm8909-tsens",
+ .data = &data_8909,
}, {
.compatible = "qcom,msm8916-tsens",
.data = &data_8916,
@@ -639,7 +639,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
extern struct tsens_plat_data data_8960;
/* TSENS v0.1 targets */
-extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
+extern struct tsens_plat_data data_8909, data_8916, data_8939, data_8974, data_9607;
/* TSENS v1 targets */
extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
The MSM8909 SoC has 5 thermal sensors in a TSENS v0.1 block. Like MDM9607 it uses a non-standard default slope value of 3000 [1] and needs per-sensor "correction factors" to workaround issues with the factory calibration [2]. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/blob/LA.UM.7.7.c26-09100-8x09.0/arch/arm/boot/dts/qcom/msm8909.dtsi#L476 [2]: https://git.codelinaro.org/clo/la/kernel/msm-3.18/-/commit/6df022c6d0c2c1b4a5a6c2124dba4d57910c0911 Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> --- Change in v2: - Rewrite on top of per-sensor nvmem cell changes that landed in 6.3 --- drivers/thermal/qcom/tsens-v0_1.c | 32 ++++++++++++++++++++++++++++++- drivers/thermal/qcom/tsens.c | 3 +++ drivers/thermal/qcom/tsens.h | 2 +- 3 files changed, 35 insertions(+), 2 deletions(-)