diff mbox series

[v5,6/9] arm64: dts: qcom: sa8775p-ride: enable the SPI node

Message ID 20230309103752.173541-7-brgl@bgdev.pl
State New
Headers show
Series arm64: dts: qcom: sa8775p-ride: enable relevant QUPv3 IPs | expand

Commit Message

Bartosz Golaszewski March 9, 2023, 10:37 a.m. UTC 
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Enable the SPI interface exposed on the sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 5fdce8279537..d01ca3a9ee37 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -14,6 +14,7 @@  / {
 	aliases {
 		serial0 = &uart10;
 		i2c18 = &i2c18;
+		spi16 = &spi16;
 	};
 
 	chosen {
@@ -40,12 +41,25 @@  &sleep_clk {
 	clock-frequency = <32764>;
 };
 
+&spi16 {
+	pinctrl-0 = <&qup_spi16_default>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &tlmm {
 	qup_uart10_default: qup-uart10-state {
 		pins = "gpio46", "gpio47";
 		function = "qup1_se3";
 	};
 
+	qup_spi16_default: qup-spi16-state {
+		pins = "gpio86", "gpio87", "gpio88", "gpio89";
+		function = "qup2_se2";
+		drive-strength = <6>;
+		bias-disable;
+	};
+
 	qup_i2c18_default: qup-i2c18-state {
 		pins = "gpio95", "gpio96";
 		function = "qup2_se4";