@@ -1,11 +1,11 @@
/*
- * linux/drivers/video/stifb.c -
- * Low level Frame buffer driver for HP workstations with
+ * linux/drivers/video/stifb.c -
+ * Low level Frame buffer driver for HP workstations with
* STI (standard text interface) video firmware.
*
* Copyright (C) 2001-2006 Helge Deller <deller@gmx.de>
* Portions Copyright (C) 2001 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- *
+ *
* Based on:
* - linux/drivers/video/artistfb.c -- Artist frame buffer driver
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
@@ -14,7 +14,7 @@
* - HP Xhp cfb-based X11 window driver for XFree86
* (c)Copyright 1992 Hewlett-Packard Co.
*
- *
+ *
* The following graphics display devices (NGLE family) are supported by this driver:
*
* HPA4070A known as "HCRX", a 1280x1024 color device with 8 planes
@@ -30,7 +30,7 @@
* supports 1280x1024 color displays with 8 planes.
* HP710G same as HP710C, 1280x1024 grayscale only
* HP710L same as HP710C, 1024x768 color only
- * HP712 internal graphics support on HP9000s712 SPU, supports 640x480,
+ * HP712 internal graphics support on HP9000s712 SPU, supports 640x480,
* 1024x768 or 1280x1024 color displays on 8 planes (Artist)
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -92,7 +92,7 @@ typedef struct {
__s32 misc_video_end;
} video_setup_t;
-typedef struct {
+typedef struct {
__s16 sizeof_ngle_data;
__s16 x_size_visible; /* visible screen dim in pixels */
__s16 y_size_visible;
@@ -177,10 +177,10 @@ static int __initdata stifb_bpp_pref[MAX_STI_ROMS];
#endif /* DEBUG_STIFB_REGS */
-#define ENABLE 1 /* for enabling/disabling screen */
+#define ENABLE 1 /* for enabling/disabling screen */
#define DISABLE 0
-#define NGLE_LOCK(fb_info) do { } while (0)
+#define NGLE_LOCK(fb_info) do { } while (0)
#define NGLE_UNLOCK(fb_info) do { } while (0)
static void
@@ -198,9 +198,9 @@ SETUP_HW(struct stifb_info *fb)
static void
SETUP_FB(struct stifb_info *fb)
-{
+{
unsigned int reg10_value = 0;
-
+
SETUP_HW(fb);
switch (fb->id)
{
@@ -210,15 +210,15 @@ SETUP_FB(struct stifb_info *fb)
reg10_value = 0x13601000;
break;
case S9000_ID_A1439A:
- if (fb->info.var.bits_per_pixel == 32)
+ if (fb->info.var.bits_per_pixel == 32)
reg10_value = 0xBBA0A000;
- else
+ else
reg10_value = 0x13601000;
break;
case S9000_ID_HCRX:
if (fb->info.var.bits_per_pixel == 32)
reg10_value = 0xBBA0A000;
- else
+ else
reg10_value = 0x13602000;
break;
case S9000_ID_TIMBER:
@@ -243,7 +243,7 @@ START_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
}
static void
-WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color)
+WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color)
{
SETUP_HW(fb);
WRITE_WORD(((0x100+index)<<2), fb, REG_3);
@@ -251,30 +251,30 @@ WRITE_IMAGE_COLOR(struct stifb_info *fb, int index, int color)
}
static void
-FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
-{
+FINISH_IMAGE_COLORMAP_ACCESS(struct stifb_info *fb)
+{
WRITE_WORD(0x400, fb, REG_2);
if (fb->info.var.bits_per_pixel == 32) {
WRITE_WORD(0x83000100, fb, REG_1);
} else {
if (fb->id == S9000_ID_ARTIST || fb->id == CRT_ID_VISUALIZE_EG)
WRITE_WORD(0x80000100, fb, REG_26);
- else
+ else
WRITE_WORD(0x80000100, fb, REG_1);
}
SETUP_FB(fb);
}
static void
-SETUP_RAMDAC(struct stifb_info *fb)
+SETUP_RAMDAC(struct stifb_info *fb)
{
SETUP_HW(fb);
WRITE_WORD(0x04000000, fb, 0x1020);
WRITE_WORD(0xff000000, fb, 0x1028);
}
-static void
-CRX24_SETUP_RAMDAC(struct stifb_info *fb)
+static void
+CRX24_SETUP_RAMDAC(struct stifb_info *fb)
{
SETUP_HW(fb);
WRITE_WORD(0x04000000, fb, 0x1000);
@@ -286,14 +286,14 @@ CRX24_SETUP_RAMDAC(struct stifb_info *fb)
}
#if 0
-static void
+static void
HCRX_SETUP_RAMDAC(struct stifb_info *fb)
{
WRITE_WORD(0xffffffff, fb, REG_32);
}
#endif
-static void
+static void
CRX24_SET_OVLY_MASK(struct stifb_info *fb)
{
SETUP_HW(fb);
@@ -314,7 +314,7 @@ ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
WRITE_WORD(value, fb, 0x1038);
}
-static void
+static void
CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
{
unsigned int value = enable ? 0x10000000 : 0x30000000;
@@ -325,11 +325,11 @@ CRX24_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
}
static void
-ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
+ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
{
u32 DregsMiscVideo = REG_21;
u32 DregsMiscCtl = REG_27;
-
+
SETUP_HW(fb);
if (enable) {
WRITE_WORD(READ_WORD(fb, DregsMiscVideo) | 0x0A000000, fb, DregsMiscVideo);
@@ -344,7 +344,7 @@ ARTIST_ENABLE_DISABLE_DISPLAY(struct stifb_info *fb, int enable)
(READ_BYTE(fb, REG_16b3) - 1)
#define HYPER_CONFIG_PLANES_24 0x00000100
-
+
#define IS_24_DEVICE(fb) \
(fb->deviceSpecificConfig & HYPER_CONFIG_PLANES_24)
@@ -470,15 +470,15 @@ SETUP_ATTR_ACCESS(struct stifb_info *fb, unsigned BufferNumber)
}
static void
-SET_ATTR_SIZE(struct stifb_info *fb, int width, int height)
+SET_ATTR_SIZE(struct stifb_info *fb, int width, int height)
{
- /* REG_6 seems to have special values when run on a
+ /* REG_6 seems to have special values when run on a
RDI precisionbook parisc laptop (INTERNAL_EG_DX1024 or
INTERNAL_EG_X1024). The values are:
0x2f0: internal (LCD) & external display enabled
0x2a0: external display only
0x000: zero on standard artist graphic cards
- */
+ */
WRITE_WORD(0x00000000, fb, REG_6);
WRITE_WORD((width<<16) | height, fb, REG_9);
WRITE_WORD(0x05000000, fb, REG_6);
@@ -486,7 +486,7 @@ SET_ATTR_SIZE(struct stifb_info *fb, int width, int height)
}
static void
-FINISH_ATTR_ACCESS(struct stifb_info *fb)
+FINISH_ATTR_ACCESS(struct stifb_info *fb)
{
SETUP_HW(fb);
WRITE_WORD(0x00000000, fb, REG_12);
@@ -499,7 +499,7 @@ elkSetupPlanes(struct stifb_info *fb)
SETUP_FB(fb);
}
-static void
+static void
ngleSetupAttrPlanes(struct stifb_info *fb, int BufferNumber)
{
SETUP_ATTR_ACCESS(fb, BufferNumber);
@@ -519,7 +519,7 @@ rattlerSetupPlanes(struct stifb_info *fb)
* read mask register for overlay planes, not image planes).
*/
CRX24_SETUP_RAMDAC(fb);
-
+
/* change fb->id temporarily to fool SETUP_FB() */
saved_id = fb->id;
fb->id = CRX24_OVERLAY_PLANES;
@@ -565,7 +565,7 @@ setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
lutBltCtl.all = 0x80000000;
lutBltCtl.fields.length = length;
- switch (fb->id)
+ switch (fb->id)
{
case S9000_ID_A1439A: /* CRX24 */
if (fb->var.bits_per_pixel == 8) {
@@ -576,12 +576,12 @@ setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
lutBltCtl.fields.lutOffset = 0 * 256;
}
break;
-
+
case S9000_ID_ARTIST:
lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
lutBltCtl.fields.lutOffset = 0 * 256;
break;
-
+
default:
lutBltCtl.fields.lutType = NGLE_CMAP_INDEXED0_TYPE;
lutBltCtl.fields.lutOffset = 0;
@@ -596,7 +596,7 @@ setNgleLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
#endif
static NgleLutBltCtl
-setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
+setHyperLutBltCtl(struct stifb_info *fb, int offsetWithinLut, int length)
{
NgleLutBltCtl lutBltCtl;
@@ -633,7 +633,7 @@ static void hyperUndoITE(struct stifb_info *fb)
/* Hardware setup for full-depth write to "magic" location */
GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
- NGLE_QUICK_SET_DST_BM_ACCESS(fb,
+ NGLE_QUICK_SET_DST_BM_ACCESS(fb,
BA(IndexedDcd, Otc04, Ots08, AddrLong,
BAJustPoint(0), BINovly, BAIndexBase(0)));
NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
@@ -653,13 +653,13 @@ static void hyperUndoITE(struct stifb_info *fb)
NGLE_UNLOCK(fb);
}
-static void
+static void
ngleDepth8_ClearImagePlanes(struct stifb_info *fb)
{
/* FIXME! */
}
-static void
+static void
ngleDepth24_ClearImagePlanes(struct stifb_info *fb)
{
/* FIXME! */
@@ -675,7 +675,7 @@ ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg)
NGLE_LOCK(fb);
GET_FIFO_SLOTS(fb, nFreeFifoSlots, 4);
- NGLE_QUICK_SET_DST_BM_ACCESS(fb,
+ NGLE_QUICK_SET_DST_BM_ACCESS(fb,
BA(IndexedDcd, Otc32, OtsIndirect,
AddrLong, BAJustPoint(0),
BINattr, BAIndexBase(0)));
@@ -713,22 +713,22 @@ ngleResetAttrPlanes(struct stifb_info *fb, unsigned int ctlPlaneReg)
/**** Finally, set the Control Plane Register back to zero: ****/
GET_FIFO_SLOTS(fb, nFreeFifoSlots, 1);
NGLE_QUICK_SET_CTL_PLN_REG(fb, 0);
-
+
NGLE_UNLOCK(fb);
}
-
+
static void
ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data)
{
int nFreeFifoSlots = 0;
u32 packed_dst;
u32 packed_len;
-
+
NGLE_LOCK(fb);
/* Hardware setup */
GET_FIFO_SLOTS(fb, nFreeFifoSlots, 8);
- NGLE_QUICK_SET_DST_BM_ACCESS(fb,
+ NGLE_QUICK_SET_DST_BM_ACCESS(fb,
BA(IndexedDcd, Otc04, Ots08, AddrLong,
BAJustPoint(0), BINovly, BAIndexBase(0)));
@@ -736,23 +736,23 @@ ngleClearOverlayPlanes(struct stifb_info *fb, int mask, int data)
NGLE_REALLY_SET_IMAGE_FG_COLOR(fb, data);
NGLE_REALLY_SET_IMAGE_PLANEMASK(fb, mask);
-
+
packed_dst = 0;
packed_len = (fb->info.var.xres << 16) | fb->info.var.yres;
NGLE_SET_DSTXY(fb, packed_dst);
-
- /* Write zeroes to overlay planes */
+
+ /* Write zeroes to overlay planes */
NGLE_QUICK_SET_IMAGE_BITMAP_OP(fb,
IBOvals(RopSrc, MaskAddrOffset(0),
BitmapExtent08, StaticReg(0),
DataDynamic, MaskOtc, BGx(0), FGx(0)));
-
+
SET_LENXY_START_RECFILL(fb, packed_len);
NGLE_UNLOCK(fb);
}
-static void
+static void
hyperResetPlanes(struct stifb_info *fb, int enable)
{
unsigned int controlPlaneReg;
@@ -783,7 +783,7 @@ hyperResetPlanes(struct stifb_info *fb, int enable)
ngleClearOverlayPlanes(fb, 0xff, 255);
/**************************************************
- ** Also need to counteract ITE settings
+ ** Also need to counteract ITE settings
**************************************************/
hyperUndoITE(fb);
break;
@@ -803,13 +803,13 @@ hyperResetPlanes(struct stifb_info *fb, int enable)
ngleResetAttrPlanes(fb, controlPlaneReg);
break;
}
-
+
NGLE_UNLOCK(fb);
}
/* Return pointer to in-memory structure holding ELK device-dependent ROM values. */
-static void
+static void
ngleGetDeviceRomData(struct stifb_info *fb)
{
#if 0
@@ -821,7 +821,7 @@ XXX: FIXME: !!!
char *pCard8;
int i;
char *mapOrigin = NULL;
-
+
int romTableIdx;
pPackedDevRomData = fb->ngle_rom;
@@ -888,7 +888,7 @@ SETUP_HCRX(struct stifb_info *fb)
/* Initialize Hyperbowl registers */
GET_FIFO_SLOTS(fb, nFreeFifoSlots, 7);
-
+
if (IS_24_DEVICE(fb)) {
hyperbowl = (fb->info.var.bits_per_pixel == 32) ?
HYPERBOWL_MODE01_8_24_LUT0_TRANSPARENT_LUT1_OPAQUE :
@@ -897,9 +897,9 @@ SETUP_HCRX(struct stifb_info *fb)
/* First write to Hyperbowl must happen twice (bug) */
WRITE_WORD(hyperbowl, fb, REG_40);
WRITE_WORD(hyperbowl, fb, REG_40);
-
+
WRITE_WORD(HYPERBOWL_MODE2_8_24, fb, REG_39);
-
+
WRITE_WORD(0x014c0148, fb, REG_42); /* Set lut 0 to be the direct color */
WRITE_WORD(0x404c4048, fb, REG_43);
WRITE_WORD(0x034c0348, fb, REG_44);
@@ -968,7 +968,7 @@ stifb_setcolreg(u_int regno, u_int red, u_int green,
0, /* Offset w/i LUT */
256); /* Load entire LUT */
NGLE_BINC_SET_SRCADDR(fb,
- NGLE_LONG_FB_ADDRESS(0, 0x100, 0));
+ NGLE_LONG_FB_ADDRESS(0, 0x100, 0));
/* 0x100 is same as used in WRITE_IMAGE_COLOR() */
START_COLORMAPLOAD(fb, lutBltCtl.all);
SETUP_FB(fb);
@@ -1006,7 +1006,7 @@ stifb_blank(int blank_mode, struct fb_info *info)
ENABLE_DISABLE_DISPLAY(fb, enable);
break;
}
-
+
SETUP_FB(fb);
return 0;
}
@@ -1092,15 +1092,15 @@ stifb_init_display(struct stifb_info *fb)
/* HCRX specific initialization */
SETUP_HCRX(fb);
-
+
/*
if (id == S9000_ID_HCRX)
hyperInitSprite(fb);
else
ngleInitSprite(fb);
*/
-
- /* Initialize the image planes. */
+
+ /* Initialize the image planes. */
switch (id) {
case S9000_ID_HCRX:
hyperResetPlanes(fb, ENABLE);
@@ -1170,7 +1170,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
fb = kzalloc(sizeof(*fb), GFP_ATOMIC);
if (!fb)
return -ENOMEM;
-
+
info = &fb->info;
/* set struct to a known state */
@@ -1211,7 +1211,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
dev_name, fb->id);
goto out_err0;
}
-
+
/* default to 8 bpp on most graphic chips */
bpp = 8;
xres = sti_onscreen_x(fb->sti);
@@ -1232,7 +1232,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
fb->id = S9000_ID_A1659A;
break;
case S9000_ID_TIMBER: /* HP9000/710 Any (may be a grayscale device) */
- if (strstr(dev_name, "GRAYSCALE") ||
+ if (strstr(dev_name, "GRAYSCALE") ||
strstr(dev_name, "Grayscale") ||
strstr(dev_name, "grayscale"))
var->grayscale = 1;
@@ -1271,16 +1271,16 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
case CRT_ID_VISUALIZE_EG:
case S9000_ID_ARTIST: /* Artist */
break;
- default:
+ default:
#ifdef FALLBACK_TO_1BPP
- printk(KERN_WARNING
+ printk(KERN_WARNING
"stifb: Unsupported graphics card (id=0x%08x) "
"- now trying 1bpp mode instead\n",
fb->id);
bpp = 1; /* default to 1 bpp */
break;
#else
- printk(KERN_WARNING
+ printk(KERN_WARNING
"stifb: Unsupported graphics card (id=0x%08x) "
"- skipping.\n",
fb->id);
@@ -1296,11 +1296,11 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
fix->line_length = (fb->sti->glob_cfg->total_x * bpp) / 8;
if (!fix->line_length)
fix->line_length = 2048; /* default */
-
+
/* limit fbsize to max visible screen size */
if (fix->smem_len > yres*fix->line_length)
fix->smem_len = ALIGN(yres*fix->line_length, 4*1024*1024);
-
+
fix->accel = FB_ACCEL_NONE;
switch (bpp) {
@@ -1326,7 +1326,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
default:
break;
}
-
+
var->xres = var->xres_virtual = xres;
var->yres = var->yres_virtual = yres;
var->bits_per_pixel = bpp;
@@ -1352,7 +1352,7 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
fix->smem_start, fix->smem_start+fix->smem_len);
goto out_err2;
}
-
+
if (!request_mem_region(fix->mmio_start, fix->mmio_len, "stifb mmio")) {
printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n",
fix->mmio_start, fix->mmio_start+fix->mmio_len);
@@ -1366,11 +1366,11 @@ static int __init stifb_init_fb(struct sti_struct *sti, int bpp_pref)
fb_info(&fb->info, "%s %dx%d-%d frame buffer device, %s, id: %04x, mmio: 0x%04lx\n",
fix->id,
- var->xres,
+ var->xres,
var->yres,
var->bits_per_pixel,
dev_name,
- fb->id,
+ fb->id,
fix->mmio_start);
return 0;
@@ -1399,7 +1399,7 @@ static int __init stifb_init(void)
struct sti_struct *sti;
struct sti_struct *def_sti;
int i;
-
+
#ifndef MODULE
char *option = NULL;
@@ -1411,7 +1411,7 @@ static int __init stifb_init(void)
printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n");
return -ENXIO;
}
-
+
def_sti = sti_get_rom(0);
if (def_sti) {
for (i = 1; i <= MAX_STI_ROMS; i++) {
@@ -1445,7 +1445,7 @@ stifb_cleanup(void)
{
struct sti_struct *sti;
int i;
-
+
for (i = 1; i <= MAX_STI_ROMS; i++) {
sti = sti_get_rom(i);
if (!sti)
@@ -1468,10 +1468,10 @@ int __init
stifb_setup(char *options)
{
int i;
-
+
if (!options || !*options)
return 1;
-
+
if (strncmp(options, "off", 3) == 0) {
stifb_disabled = 1;
options += 3;
Fix coding style. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/video/fbdev/stifb.c | 156 ++++++++++++++++++------------------ 1 file changed, 78 insertions(+), 78 deletions(-)