@@ -90,4 +90,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
new file mode 100644
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3588s.dtsi"
+
+/ {
+ model = "Khadas Edge2";
+ compatible = "khadas,edge2", "rockchip,rk3588s";
+
+ aliases {
+ mmc0 = &sdhci;
+ serial2 = &uart2;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&sdhci {
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ max-frequency = <200000000>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "okay";
+};
Edge2 is an ultraslim, credit-card sized ARM PC designed by Khadas. In this patch, we will add basic device tree support for this board, Only eMMC, UART are enabled, so it's capable of booting into a basic linux system from eMMC via serial console. Signed-off-by: Yixun Lan <dlan@gentoo.org> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3588s-khadas-edge2.dts | 37 +++++++++++++++++++ 2 files changed, 38 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts