@@ -16,7 +16,7 @@ description: |
operation modes at 10/100 Mb/s data transfer rates.
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
properties:
compatible:
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A10 EMAC Ethernet Controller
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
maintainers:
- Chen-Yu Tsai <wens@csie.org>
@@ -11,7 +11,7 @@ maintainers:
- Maxime Ripard <mripard@kernel.org>
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
# Select every compatible, including the deprecated ones. This way, we
# will be able to report a warning when we have that compatible, since
@@ -66,7 +66,7 @@ required:
- tx-fifo-depth
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
- if:
properties:
compatible:
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Meson DWMAC Ethernet controller
@@ -15,7 +15,7 @@ description: |+
MAC.
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
properties:
compatible:
@@ -10,7 +10,7 @@ maintainers:
- Florian Fainelli <f.fainelli@gmail.com>
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
- if:
properties:
compatible:
@@ -66,7 +66,7 @@ required:
- phy-mode
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
unevaluatedProperties: false
@@ -121,7 +121,7 @@ required:
- compatible
dependencies:
- brcm,requires-autobaud-mode: [ 'shutdown-gpios' ]
+ brcm,requires-autobaud-mode: [ shutdown-gpios ]
if:
not:
@@ -35,15 +35,15 @@ properties:
maxItems: 1
tx-fifo-depth:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: CAN Tx fifo depth (Zynq, Axi CAN).
rx-fifo-depth:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
tx-mailbox-count:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: CAN Tx mailbox buffer count (CAN FD)
required:
@@ -103,7 +103,7 @@ required:
- "#size-cells"
allOf:
- - $ref: "dsa.yaml#"
+ - $ref: dsa.yaml#
- if:
properties:
compatible:
@@ -66,7 +66,7 @@ properties:
With the legacy mapping the reg corresponding to the internal
mdio is the switch reg with an offset of -1.
-$ref: "dsa.yaml#"
+$ref: dsa.yaml#
patternProperties:
"^(ethernet-)?ports$":
@@ -62,7 +62,7 @@ properties:
mdio:
type: object
- $ref: "mdio.yaml#"
+ $ref: mdio.yaml#
description: optional node for embedded MDIO controller
required:
@@ -83,7 +83,7 @@ properties:
0: Disable 2.4 Vpp operating mode.
1: Request 2.4 Vpp operating mode from link partner.
Absence of this property will leave configuration to default values.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
broken-turn-around:
@@ -14,7 +14,7 @@ description:
located under the 'dpmacs' node for the fsl-mc bus DTS node.
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
properties:
compatible:
@@ -2,8 +2,8 @@
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP46x PTP Timer (TSYNC)
@@ -2,13 +2,13 @@
# Copyright 2018 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP4xx ethernet
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
@@ -28,7 +28,7 @@ properties:
description: Ethernet MMIO address range
queue-rx:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the RX queue node
@@ -36,7 +36,7 @@ properties:
description: phandle to the RX queue on the NPE
queue-txready:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the TX READY queue node
@@ -48,7 +48,7 @@ properties:
phy-handle: true
intel,npe-handle:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the NPE this ethernet instance is using
@@ -2,8 +2,8 @@
# Copyright 2021 Linaro Ltd.
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS)
@@ -24,7 +24,7 @@ properties:
description: The HSS instance
intel,npe-handle:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
items:
- description: phandle to the NPE this HSS instance is using
@@ -33,7 +33,7 @@ properties:
and the instance to use in the second cell
intel,queue-chl-rxtrig:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the RX trigger queue on the NPE
@@ -41,7 +41,7 @@ properties:
description: phandle to the RX trigger queue on the NPE
intel,queue-chl-txready:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the TX ready queue on the NPE
@@ -49,7 +49,7 @@ properties:
description: phandle to the TX ready queue on the NPE
intel,queue-pkt-rx:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the RX queue on the NPE
@@ -57,7 +57,7 @@ properties:
description: phandle to the packet RX queue on the NPE
intel,queue-pkt-tx:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 4
items:
items:
@@ -66,7 +66,7 @@ properties:
description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
intel,queue-pkt-rxfree:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 4
items:
items:
@@ -76,7 +76,7 @@ properties:
RXFREE3 queues on the NPE
intel,queue-pkt-txdone:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the TXDONE queue on the NPE
@@ -20,7 +20,7 @@ description: |+
definition.
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
properties:
compatible:
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/marvell-bluetooth.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Marvell Bluetooth chips
@@ -12,7 +12,7 @@ maintainers:
- Russell King <linux@armlinux.org.uk>
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
properties:
compatible:
@@ -91,7 +91,7 @@ properties:
const: 0
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
- if:
properties:
compatible:
@@ -15,7 +15,7 @@ description:
modes with flow-control as well as CRC offloading and VLAN tags.
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
properties:
compatible:
@@ -73,7 +73,7 @@ properties:
"^port@[0-9a-f]+$":
type: object
- $ref: "/schemas/net/ethernet-controller.yaml#"
+ $ref: /schemas/net/ethernet-controller.yaml#
unevaluatedProperties: false
properties:
@@ -99,7 +99,7 @@ properties:
microchip,bandwidth:
description: Specifies bandwidth in Mbit/s allocated to the port.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
maximum: 25000
microchip,sd-sgpio:
@@ -107,7 +107,7 @@ properties:
Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
This is optional, and only needed if the default used index is
is not correct.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 383
@@ -10,7 +10,7 @@ maintainers:
- Alexandre Belloni <alexandre.belloni@bootlin.com>
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
properties:
compatible:
@@ -28,7 +28,7 @@ properties:
maxItems: 1
reset-n-io:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
maxItems: 1
description: |
Output GPIO pin used to reset the chip (active low)
@@ -31,7 +31,7 @@ required:
- compatible
dependencies:
- interrupts: [ 'reg' ]
+ interrupts: [ reg ]
additionalProperties: false
@@ -13,7 +13,7 @@ description: Regulator based PoDL PSE controller. The device must be referenced
by the PHY node to control power injection to the Ethernet cable.
allOf:
- - $ref: "pse-controller.yaml#"
+ - $ref: pse-controller.yaml#
properties:
compatible:
@@ -51,7 +51,7 @@ required:
- "#size-cells"
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
- if:
properties:
@@ -14,7 +14,7 @@ description:
used to communicate with the gmac phy connected.
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
properties:
compatible:
@@ -61,7 +61,7 @@ required:
- mdio
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
- if:
properties:
compatible:
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Rockchip 10/100/1000 Ethernet driver(GMAC)
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/sff,sfp.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/sff,sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
Transceiver
@@ -555,7 +555,7 @@ dependencies:
snps,reset-delays-us: ["snps,reset-gpio"]
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
- if:
properties:
compatible:
@@ -2,8 +2,8 @@
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/stm32-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
@@ -26,7 +26,7 @@ select:
- compatible
allOf:
- - $ref: "snps,dwmac.yaml#"
+ - $ref: snps,dwmac.yaml#
properties:
compatible:
@@ -73,7 +73,7 @@ properties:
- ptp_ref
st,syscon:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to the syscon node which encompases the glue register
@@ -62,10 +62,10 @@ properties:
interrupt-names:
items:
- - const: "rx_thresh"
- - const: "rx"
- - const: "tx"
- - const: "misc"
+ - const: rx_thresh
+ - const: rx
+ - const: tx
+ - const: misc
pinctrl-names: true
@@ -154,7 +154,7 @@ patternProperties:
type: object
description:
CPSW MDIO bus.
- $ref: "ti,davinci-mdio.yaml#"
+ $ref: ti,davinci-mdio.yaml#
required:
@@ -13,7 +13,7 @@ description:
TI SoC Davinci/Keystone2 MDIO Controller
allOf:
- - $ref: "mdio.yaml#"
+ - $ref: mdio.yaml#
properties:
compatible:
@@ -2,8 +2,8 @@
# Copyright (C) 2020 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/ti,dp83822.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DP83822 ethernet PHY
@@ -21,7 +21,7 @@ description: |
http://www.ti.com/lit/ds/symlink/dp83822i.pdf
allOf:
- - $ref: "ethernet-phy.yaml#"
+ - $ref: ethernet-phy.yaml#
properties:
reg:
@@ -2,13 +2,13 @@
# Copyright (C) 2019 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/ti,dp83867.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/ti,dp83867.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DP83867 ethernet PHY
allOf:
- - $ref: "ethernet-controller.yaml#"
+ - $ref: ethernet-controller.yaml#
maintainers:
- Andrew Davis <afd@ti.com>
@@ -2,13 +2,13 @@
# Copyright (C) 2019 Texas Instruments Incorporated
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/ti,dp83869.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI DP83869 ethernet PHY
allOf:
- - $ref: "ethernet-phy.yaml#"
+ - $ref: ethernet-phy.yaml#
maintainers:
- Andrew Davis <afd@ti.com>
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Toshiba Visconti DWMAC Ethernet controller
@@ -1,8 +1,8 @@
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
-$id: "http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
title: The Vertexcom MSE102x (SPI)