| Message ID | 20230323005925.23179-2-lujianhua000@gmail.com |
|---|---|
| State | Accepted |
| Commit | 51c4c2bd6f314de8b1bb7b5c949d2432be19d419 |
| Headers | show |
| Series | [v3,1/3] arm64: dts: qcom: Split elish dts into common dtsi and elish-boe dts | expand |
On 23/03/2023 01:59, Jianhua Lu wrote: > Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel > is a dual dsi mode panel and the dsi phy type is cphy. > > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> > --- > Changes in v2: > - Include missing <dt-bindings/phy/phy.h> for phy-type property. > > Changes in v3: > - Sort include header. > - Move qcom,sync-dual-dsi to the front of qcom,master-dsi > - Add newline before subnode. > > .../boot/dts/qcom/sm8250-xiaomi-elish-boe.dts | 5 ++ > .../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 75 +++++++++++++++++++ > 2 files changed, 80 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts > index bd9ad109daf9..8b2ae39950ff 100644 > --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts > +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts > @@ -11,3 +11,8 @@ / { > model = "Xiaomi Mi Pad 5 Pro (BOE)"; > compatible = "xiaomi,elish", "qcom,sm8250"; > }; > + > +&display_panel { > + compatible = "xiaomi,elish-boe-nt36523"; If you add new bindings and new nodes using these - in this case this panel - please test it. This is why we have DT schema, so you can verify your DTS. Sending DTS which is entirely different than the bindings you sent, is adding quite an effort for us later to fix it. Best regards, Krzysztof
On Sat, Apr 08, 2023 at 03:04:52PM +0200, Krzysztof Kozlowski wrote: > On 23/03/2023 01:59, Jianhua Lu wrote: > > Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel > > is a dual dsi mode panel and the dsi phy type is cphy. > > > > Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> > > --- > > Changes in v2: > > - Include missing <dt-bindings/phy/phy.h> for phy-type property. > > > > Changes in v3: > > - Sort include header. > > - Move qcom,sync-dual-dsi to the front of qcom,master-dsi > > - Add newline before subnode. > > > > .../boot/dts/qcom/sm8250-xiaomi-elish-boe.dts | 5 ++ > > .../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 75 +++++++++++++++++++ > > 2 files changed, 80 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts > > index bd9ad109daf9..8b2ae39950ff 100644 > > --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts > > +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts > > @@ -11,3 +11,8 @@ / { > > model = "Xiaomi Mi Pad 5 Pro (BOE)"; > > compatible = "xiaomi,elish", "qcom,sm8250"; > > }; > > + > > +&display_panel { > > + compatible = "xiaomi,elish-boe-nt36523"; > > If you add new bindings and new nodes using these - in this case this > panel - please test it. This is why we have DT schema, so you can verify > your DTS. Sending DTS which is entirely different than the bindings you > sent, is adding quite an effort for us later to fix it. I apologize for this. I will test it before sending patches next time. > > Best regards, > Krzysztof >
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts index bd9ad109daf9..8b2ae39950ff 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-boe.dts @@ -11,3 +11,8 @@ / { model = "Xiaomi Mi Pad 5 Pro (BOE)"; compatible = "xiaomi,elish", "qcom,sm8250"; }; + +&display_panel { + compatible = "xiaomi,elish-boe-nt36523"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index a43d4b73ffca..4585f61781f1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" #include "pm8150.dtsi" @@ -469,6 +470,76 @@ &cdsp { status = "okay"; }; +&dsi0 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + qcom,master-dsi; + status = "okay"; + + display_panel: panel@0 { + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + backlight = <&backlight>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_in_0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1{ + reg = <1>; + + panel_in_1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + + }; + }; +}; + +&dsi0_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_0>; +}; + +&dsi0_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + +&dsi1 { + vdda-supply = <&vreg_l9a_1p2>; + qcom,dual-dsi-mode; + qcom,sync-dual-dsi; + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>; + status = "okay"; +}; + +&dsi1_out { + data-lanes = <0 1 2>; + remote-endpoint = <&panel_in_1>; +}; + +&dsi1_phy { + vdds-supply = <&vreg_l5a_0p88>; + phy-type = <PHY_TYPE_CPHY>; + status = "okay"; +}; + &gmu { status = "okay"; }; @@ -533,6 +604,10 @@ fuel-gauge@55 { }; }; +&mdss { + status = "okay"; +}; + &pcie0 { status = "okay"; };
Add nodes for BOE NT36523 panel found in xiaomi-elish. This panel is a dual dsi mode panel and the dsi phy type is cphy. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> --- Changes in v2: - Include missing <dt-bindings/phy/phy.h> for phy-type property. Changes in v3: - Sort include header. - Move qcom,sync-dual-dsi to the front of qcom,master-dsi - Add newline before subnode. .../boot/dts/qcom/sm8250-xiaomi-elish-boe.dts | 5 ++ .../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 75 +++++++++++++++++++ 2 files changed, 80 insertions(+)