Message ID | 20230330193303.612475-1-bhupesh.sharma@linaro.org |
---|---|
State | New |
Headers | show |
Series | [RESEND,v2,1/1] arm64: dts: qcom: sm6115: Add CPU idle-states | expand |
Hi Konrad, On Sat, 1 Apr 2023 at 17:51, Konrad Dybcio <konrad.dybcio@linaro.org> wrote: > > > > On 30.03.2023 21:33, Bhupesh Sharma wrote: > > Add CPU idle-state nodes and power-domains in Qualcomm sm6115 SoC dtsi. > > > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> > > --- > > Changes since v1: > > - v1 can be viewed here: https://lore.kernel.org/lkml/e5cda4cf-5c2a-a7ed-9e1d-1fe9f2cbef40@linaro.org > > - Addressed Konrad's comments on v1 and added GDHS and Power Collapse > > cluster power states. > > > > arch/arm64/boot/dts/qcom/sm6115.dtsi | 136 +++++++++++++++++++++++++++ > > 1 file changed, 136 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > > index 2a51c938bbcb..b63395d476ed 100644 > > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > > @@ -45,6 +45,8 @@ CPU0: cpu@0 { > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > qcom,freq-domain = <&cpufreq_hw 0>; > > + power-domains = <&CPU_PD0>; > > + power-domain-names = "psci"; > > L2_0: l2-cache { > > compatible = "cache"; > > cache-level = <2>; > > @@ -61,6 +63,8 @@ CPU1: cpu@1 { > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > qcom,freq-domain = <&cpufreq_hw 0>; > > + power-domains = <&CPU_PD1>; > > + power-domain-names = "psci"; > > }; > > > > CPU2: cpu@2 { > > @@ -73,6 +77,8 @@ CPU2: cpu@2 { > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > qcom,freq-domain = <&cpufreq_hw 0>; > > + power-domains = <&CPU_PD2>; > > + power-domain-names = "psci"; > > }; > > > > CPU3: cpu@3 { > > @@ -85,6 +91,8 @@ CPU3: cpu@3 { > > enable-method = "psci"; > > next-level-cache = <&L2_0>; > > qcom,freq-domain = <&cpufreq_hw 0>; > > + power-domains = <&CPU_PD3>; > > + power-domain-names = "psci"; > > }; > > > > CPU4: cpu@100 { > > @@ -97,6 +105,8 @@ CPU4: cpu@100 { > > dynamic-power-coefficient = <282>; > > next-level-cache = <&L2_1>; > > qcom,freq-domain = <&cpufreq_hw 1>; > > + power-domains = <&CPU_PD4>; > > + power-domain-names = "psci"; > > L2_1: l2-cache { > > compatible = "cache"; > > cache-level = <2>; > > @@ -113,6 +123,8 @@ CPU5: cpu@101 { > > enable-method = "psci"; > > next-level-cache = <&L2_1>; > > qcom,freq-domain = <&cpufreq_hw 1>; > > + power-domains = <&CPU_PD5>; > > + power-domain-names = "psci"; > > }; > > > > CPU6: cpu@102 { > > @@ -125,6 +137,8 @@ CPU6: cpu@102 { > > enable-method = "psci"; > > next-level-cache = <&L2_1>; > > qcom,freq-domain = <&cpufreq_hw 1>; > > + power-domains = <&CPU_PD6>; > > + power-domain-names = "psci"; > > }; > > > > CPU7: cpu@103 { > > @@ -137,6 +151,8 @@ CPU7: cpu@103 { > > enable-method = "psci"; > > next-level-cache = <&L2_1>; > > qcom,freq-domain = <&cpufreq_hw 1>; > > + power-domains = <&CPU_PD7>; > > + power-domain-names = "psci"; > > }; > > > > cpu-map { > > @@ -176,6 +192,68 @@ core3 { > > }; > > }; > > }; > > + > > + idle-states { > > + entry-method = "psci"; > > + > > + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { > > + compatible = "arm,idle-state"; > > + idle-state-name = "silver-rail-power-collapse"; > > + arm,psci-suspend-param = <0x40000003>; > > + entry-latency-us = <290>; > > + exit-latency-us = <376>; > > + min-residency-us = <1182>; > > + local-timer-stop; > > + }; > > + > > + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { > > + compatible = "arm,idle-state"; > > + idle-state-name = "gold-rail-power-collapse"; > > + arm,psci-suspend-param = <0x40000003>; > > + entry-latency-us = <297>; > > + exit-latency-us = <324>; > > + min-residency-us = <1110>; > > + local-timer-stop; > > + }; > > + }; > > + > > + domain-idle-states { > > + CLUSTER_0_SLEEP_0: cluster-sleep-0-0 { > > + /* GDHS */ > > + compatible = "domain-idle-state"; > > + arm,psci-suspend-param = <0x40000022>; > This 0x22 ending seems very sus. > > The last nibble represents the core-level power state and the > penultimate one represents the same at cluster level. A value > of 2 in that cluster nibble is actually undefined by the PSCI spec, > whereas the value of 4 (as you have in all of the other idle > states, including D3G for the perf cluster) corresponds to > "Retention", so unless there's a very weird nuance in the > TZ for this SoC, it should probably end in 0x42. > > Otherwise I think this LGTM now! I am also learning by experiment about the exact values to use here, as the only ready reckoner of how these values are calculated, seems to be available via [1]. Also it seems the downstream code uses the following approach to calculate the LPM state suspend-param, which for example for CLUSTER_0_SLEEP_1 states turns out to be: state_id = get_cluster_id(cpu->parent, &affinity_level, from_idle); = 0x40 power_state = (is-reset << 30) = 0x40000000 affinity_level = (affinity level & 0x3) << 24 = 0x1000000 state_id += power_state + affinity_level + psci_id; = 0x40000000 + 0x1000000 + 0x40 + 0x4 = 0x41000044 For the D3G cases as well, I just used the 'qcom,psci-mode = <2>' value as provided in downstream code (see [2]), for the overall calculations. Also, the only usage of D3G state I could find upstream (in qcom dtsi files0 is for 'msm8916' (see [3]), which also uses the value with ending 0x2 -> 'arm,psci-suspend-param = <0x41000032>' [1]. https://patchwork.kernel.org/project/linux-arm-msm/patch/20201221002907.2870059-3-danny@kdrag0n.dev/#23857409 [2]. https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-11.0.0_r0.56/qcom/bengal-pm.dtsi#127 [3]. https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/qcom/msm8916.dtsi#L209 Thanks, Bhupesh > > + entry-latency-us = <360>; > > + exit-latency-us = <421>; > > + min-residency-us = <782>; > > + }; > > + > > + CLUSTER_0_SLEEP_1: cluster-sleep-0-1 { > > + /* Power Collapse */ > > + compatible = "domain-idle-state"; > > + arm,psci-suspend-param = <0x41000044>; > > + entry-latency-us = <800>; > > + exit-latency-us = <2118>; > > + min-residency-us = <7376>; > > + }; > > + > > + CLUSTER_1_SLEEP_0: cluster-sleep-1-0 { > > + /* GDHS */ > > + compatible = "domain-idle-state"; > > + arm,psci-suspend-param = <0x40000042>; > > + entry-latency-us = <314>; > > + exit-latency-us = <345>; > > + min-residency-us = <660>; > > + }; > > + > > + CLUSTER_1_SLEEP_1: cluster-sleep-1-1 { > > + /* Power Collapse */ > > + compatible = "domain-idle-state"; > > + arm,psci-suspend-param = <0x41000044>; > > + entry-latency-us = <640>; > > + exit-latency-us = <1654>; > > + min-residency-us = <8094>; > > + }; > > + }; > > }; > > > > firmware { > > @@ -199,6 +277,64 @@ pmu { > > psci { > > compatible = "arm,psci-1.0"; > > method = "smc"; > > + > > + CPU_PD0: power-domain-cpu0 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_0_PD>; > > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD1: power-domain-cpu1 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_0_PD>; > > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD2: power-domain-cpu2 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_0_PD>; > > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD3: power-domain-cpu3 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_0_PD>; > > + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD4: power-domain-cpu4 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_1_PD>; > > + domain-idle-states = <&BIG_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD5: power-domain-cpu5 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_1_PD>; > > + domain-idle-states = <&BIG_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD6: power-domain-cpu6 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_1_PD>; > > + domain-idle-states = <&BIG_CPU_SLEEP_0>; > > + }; > > + > > + CPU_PD7: power-domain-cpu7 { > > + #power-domain-cells = <0>; > > + power-domains = <&CLUSTER_1_PD>; > > + domain-idle-states = <&BIG_CPU_SLEEP_0>; > > + }; > > + > > + CLUSTER_0_PD: power-domain-cpu-cluster0 { > > + #power-domain-cells = <0>; > > + domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>; > > + }; > > + > > + CLUSTER_1_PD: power-domain-cpu-cluster1 { > > + #power-domain-cells = <0>; > > + domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>; > > + }; > > }; > > > > reserved_memory: reserved-memory {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 2a51c938bbcb..b63395d476ed 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -45,6 +45,8 @@ CPU0: cpu@0 { enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; @@ -61,6 +63,8 @@ CPU1: cpu@1 { enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -73,6 +77,8 @@ CPU2: cpu@2 { enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -85,6 +91,8 @@ CPU3: cpu@3 { enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; CPU4: cpu@100 { @@ -97,6 +105,8 @@ CPU4: cpu@100 { dynamic-power-coefficient = <282>; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; L2_1: l2-cache { compatible = "cache"; cache-level = <2>; @@ -113,6 +123,8 @@ CPU5: cpu@101 { enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; }; CPU6: cpu@102 { @@ -125,6 +137,8 @@ CPU6: cpu@102 { enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; }; CPU7: cpu@103 { @@ -137,6 +151,8 @@ CPU7: cpu@103 { enable-method = "psci"; next-level-cache = <&L2_1>; qcom,freq-domain = <&cpufreq_hw 1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; }; cpu-map { @@ -176,6 +192,68 @@ core3 { }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <297>; + exit-latency-us = <324>; + min-residency-us = <1110>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_0_SLEEP_0: cluster-sleep-0-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000022>; + entry-latency-us = <360>; + exit-latency-us = <421>; + min-residency-us = <782>; + }; + + CLUSTER_0_SLEEP_1: cluster-sleep-0-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + + CLUSTER_1_SLEEP_0: cluster-sleep-1-0 { + /* GDHS */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x40000042>; + entry-latency-us = <314>; + exit-latency-us = <345>; + min-residency-us = <660>; + }; + + CLUSTER_1_SLEEP_1: cluster-sleep-1-1 { + /* Power Collapse */ + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <640>; + exit-latency-us = <1654>; + min-residency-us = <8094>; + }; + }; }; firmware { @@ -199,6 +277,64 @@ pmu { psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_0_PD>; + domain-idle-states = <&LITTLE_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_1_PD>; + domain-idle-states = <&BIG_CPU_SLEEP_0>; + }; + + CLUSTER_0_PD: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_0_SLEEP_0>, <&CLUSTER_0_SLEEP_1>; + }; + + CLUSTER_1_PD: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_1_SLEEP_0>, <&CLUSTER_1_SLEEP_1>; + }; }; reserved_memory: reserved-memory {
Add CPU idle-state nodes and power-domains in Qualcomm sm6115 SoC dtsi. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> --- Changes since v1: - v1 can be viewed here: https://lore.kernel.org/lkml/e5cda4cf-5c2a-a7ed-9e1d-1fe9f2cbef40@linaro.org - Addressed Konrad's comments on v1 and added GDHS and Power Collapse cluster power states. arch/arm64/boot/dts/qcom/sm6115.dtsi | 136 +++++++++++++++++++++++++++ 1 file changed, 136 insertions(+)