@@ -14,6 +14,7 @@
#include <linux/mailbox_client.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
@@ -322,8 +323,10 @@ static int qcom_mpm_init(struct device_node *np, struct device_node *parent)
struct device *dev = &pdev->dev;
struct irq_domain *parent_domain;
struct generic_pm_domain *genpd;
+ struct device_node *msgram_np;
struct qcom_mpm_priv *priv;
unsigned int pin_cnt;
+ struct resource res;
int i, irq;
int ret;
@@ -374,9 +377,21 @@ static int qcom_mpm_init(struct device_node *np, struct device_node *parent)
raw_spin_lock_init(&priv->lock);
- priv->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
+ /* If we have a handle to an RPM message ram partition, use it. */
+ msgram_np = of_parse_phandle(np, "qcom,rpm-msg-ram", 0);
+ if (msgram_np) {
+ ret = of_address_to_resource(msgram_np, 0, &res);
+ /* Don't use devm_ioremap_resource, as we're accessing a shared region. */
+ priv->base = devm_ioremap(dev, res.start, resource_size(&res));
+ of_node_put(msgram_np);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+ } else {
+ /* Otherwise, fall back to simple MMIO. */
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+ }
for (i = 0; i < priv->reg_stride; i++) {
qcom_mpm_write(priv, MPM_REG_ENABLE, i, 0);
The MPM hardware is accessible to us from the ARM CPUs through a shared memory region (RPM MSG RAM) that's also concurrently accessed by other kinds of cores on the system (like modem, ADSP etc.). Modeling this relation in a (somewhat) sane manner in the device tree basically requires us to either present the MPM as a child of said memory region (which makes little sense, as a mapped memory carveout is not a bus), define nodes which bleed their register spaces into one another, or passing their slice of the MSG RAM through some kind of a property. Go with the third option and add a way to map a region passed through the "qcom,rpm-msg-ram" property as our register space. The current way of using 'reg' is preserved for ABI reasons. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/irqchip/irq-qcom-mpm.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)